Unlimited Ocr Batch Folder

Unlimited-OCR — batch parse a folder of PDFs and images

Process an entire folder of images and PDFs without losing work to interruption, using the same proven baidu/Unlimited-OCR model that powers unlimited-ocr-parse-document. Results are written incrementally to a manifest, so a long run that gets interrupted can be resumed without reprocessing.

Self-Evolving Skill: every number and guarantee below was measured on this hardware, not copied from upstream documentation. If a guarantee stops holding, fix this file and references immediately rather than deferring. Re-verify before changing a documented fact.

The guarantees

1. ONE IMAGE PER FORWARD PASS, ALWAYS — per-image processing is deliberate and measured. Single-pass multi-image on MLX recovered 1/3, 4/5, and 0/10 pages; per-image recovered 100 % every time. See ../../references/PITFALLS.md § 3.
2. CHECKPOINT AND RESUME — every result is written to disk BEFORE the manifest is updated. If the process dies, the incomplete line is never recorded. Re-run with the same output folder to skip everything already done.
3. CHARTS COME BACK EMPTY — this is correct behaviour for a layout parser and a fatal surprise if you expected a vision model. See the next section.
4. EXIT CODES: The batch script returns a summary exit code: 0 if all files succeeded without repetition, 1 if some files had repetition suspected (check before trusting), 2 if any files failed with hard errors. Per-file status is always recorded in the manifest.
5. MEMORY-BOUNDED — no result accumulation. Each file runs in its own process (load, infer, write, exit), so a 1,000-file folder never threatens machine stability.

What it will NOT do

Charts come back empty. Fed a nine-panel matplotlib figure, the model returned nine perfectly-placed chart bounding boxes and zero characters. That is correct for a layout parser and catastrophic if you assumed an image captioner.

If you need the content of charts, use unlimited-ocr-segment-figure to crop each detected region independently, then hand the crops to a vision model that does describe images.

Use it

S=~/eon/cc-skills/plugins/unlimited-ocr/scripts/unlimited_ocr_batch_folder_parser.py

# Process a folder, writing results incrementally to ~/results/
uv run --no-project $S --folder ~/my_documents --output ~/results

# Resume from where it left off (skips everything in the manifest)
uv run --no-project $S --folder ~/my_documents --output ~/results

# Collapse character-spaced math (c u r v e -> curve), keep tables as HTML
uv run --no-project $S --folder ~/my_documents --output ~/results \\
  --collapse-math --table-format html

# Use a specific backend (mlx on Apple Silicon, cuda on NVIDIA)
uv run --no-project $S --folder ~/my_documents --output ~/results --backend mlx

# Suppress per-file progress (quieter stderr)
uv run --no-project $S --folder ~/my_documents --output ~/results --quiet

Output structure

~/results/
  manifest.jsonl              # One JSON object per file, newline-delimited
  progress_report.txt         # Summary at the end
  <image_stem>.md             # Markdown for each input image
  <pdf_stem>.md               # Markdown for each page of each PDF
  <pdf_stem>.json             # Layout boxes and metadata (optional)

Every line in manifest.jsonl is:

{
  "source_path": "/path/to/image.png",
  "output_md": "image.md",
  "output_json": null,
  "status": "done",
  "elapsed_seconds": 2.4,
  "backend": "mlx",
  "page_count": 1,
  "error_message": null
}

Statuses are:

• done — parsed successfully, no repetition detected
• repetition_suspected — parsed, but a repetition detector fired; inspect before trusting
• failed — error (see error_message)

Flags

Interruption safety

The script is safe to interrupt (Ctrl+C) at any time:

1. Each file's result is written to the output folder before the manifest is updated.
2. The manifest is append-only; if a line is there, the output files exist.
3. Re-running with the same output folder automatically skips everything already in the manifest.
4. If a process crashes mid-write, the incomplete manifest line is never recorded.

To re-process a file: delete its line from manifest.jsonl and re-run.

Choosing a backend

--backend auto (default) prefers MLX on Apple Silicon, CUDA on NVIDIA.

Full benchmarks and platform notes: ../../references/EMPIRICAL.md.

Understanding the repetition detector

Exit code 1 means repetition was suspected, NOT that the run failed. The detector is structural (short chunks repeating in the tail), not probabilistic, so a NEW repetition is caught, not just the known ones from the reference table.

Measured base rate: ~4 % on tables (103 real images from the quantml corpus). Budget for it, but do not discard the output automatically — check it first. Most will be valid despite the warning.

All repetition detections are recorded in the manifest, so you can filter afterward:

jq 'select(.status == "repetition_suspected")' ~/results/manifest.jsonl

Common questions

Q: Can I run this on a CPU?

No. The model's only published runtimes are MLX (Apple Silicon, GPU-backed) and transformers/CUDA (NVIDIA GPU). A CPU implementation does not exist. On a Mac, you have Apple Silicon MLX available.

Q: How long does a 1,000-image folder take?

~2 hours on a single M3 Max at ~7 s/image median. Every image runs in its own process, so if you have spare cores, parallelizing across multiple invocations (folder splits) will help. A separate tool for that is outside scope.

Q: What if a file is corrupted or unreadable?

It gets marked failed with an error message in the manifest. The batch continues without stopping.

Q: Can I change the output folder without reprocessing?

No. The manifest is tied to the output folder. To reprocess everything, use a new output folder.

Limits and guarantees

All documented in ../../references/PITFALLS.md (every entry was hit while building this plugin) and ../../references/EMPIRICAL.md (every number was measured on the two machines it supports).

Key ones:

• Single-pass multi-image is deliberately unused. The model's headline capability does not survive contact with the MLX path — you get incomplete pages and no error. Per-image is slower and complete.
• The image MIME type is detected from magic bytes, not the file extension. WeChat serves PNG/WebP under .jpg URLs; the CLI reads the first bytes to detect the truth.
• Bounding box coordinates are normalised to 0–1000 on BOTH axes, independent of the image's aspect ratio.
• Mathematics comes back character-spaced by default (c u r v e). Pass --collapse-math to rejoin it.
• The model writes tables as HTML <table>, never as pipe-markdown — measured at 88 of 103 real tables. This batch parser converts them to pipe-markdown by default; pass --table-format html to keep the model's own serialization.
• --pad-pixels 0 clips the axis labels off every chart crop. If you use segment, start with the default (12 px) and raise it only if captions are clipped.

Post-Execution Reflection

After this skill completes, check before closing:

1. Did repetition get detected? — record which document types triggered it in ../../references/PITFALLS.md § 3; the base rate is ~4 % on tables.
2. Did the folder finish? — check progress_report.txt for the final counts.
3. Are there failures? — jq 'select(.status == "failed")' manifest.jsonl to see which files errored.
4. Do the markdown outputs look right? — spot-check a few; tables come back as HTML unless you passed --table-format pipe, and charts come back empty.