Rust Testing

Rust 测试模式

遵循 TDD 方法论编写可靠、可维护测试的全面 Rust 测试模式。

何时使用

• 编写新的 Rust 函数、方法或特征
• 为现有代码添加测试覆盖率
• 为性能关键代码创建基准测试
• 为输入验证实现基于属性的测试
• 在 Rust 项目中遵循 TDD 工作流

工作原理

1. 识别目标代码 — 找到要测试的函数、特征或模块
2. 编写测试 — 在 #[cfg(test)] 模块中使用 #[test]，使用 rstest 进行参数化测试，或使用 proptest 进行基于属性的测试
3. 模拟依赖项 — 使用 mockall 来隔离被测单元
4. 运行测试 (RED) — 验证测试是否按预期失败
5. 实现 (GREEN) — 编写最少代码以通过测试
6. 重构 — 改进代码同时保持测试通过
7. 检查覆盖率 — 使用 cargo-llvm-cov，目标 80% 以上

Rust 的 TDD 工作流

RED-GREEN-REFACTOR 循环

RED     → 先写一个失败的测试
GREEN   → 编写最少代码使测试通过
REFACTOR → 重构代码，同时保持测试通过
REPEAT  → 继续下一个需求

Rust 中的分步 TDD

// RED: Write test first, use todo!() as placeholder
pub fn add(a: i32, b: i32) -> i32 { todo!() }

#[cfg(test)]
mod tests {
    use super::*;
    #[test]
    fn test_add() { assert_eq!(add(2, 3), 5); }
}
// cargo test → panics at 'not yet implemented'

// GREEN: Replace todo!() with minimal implementation
pub fn add(a: i32, b: i32) -> i32 { a + b }
// cargo test → PASS, then REFACTOR while keeping tests green

单元测试

模块级测试组织

// src/user.rs
pub struct User {
    pub name: String,
    pub email: String,
}

impl User {
    pub fn new(name: impl Into<String>, email: impl Into<String>) -> Result<Self, String> {
        let email = email.into();
        if !email.contains('@') {
            return Err(format!("invalid email: {email}"));
        }
        Ok(Self { name: name.into(), email })
    }

    pub fn display_name(&self) -> &str {
        &self.name
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn creates_user_with_valid_email() {
        let user = User::new("Alice", "alice@example.com").unwrap();
        assert_eq!(user.display_name(), "Alice");
        assert_eq!(user.email, "alice@example.com");
    }

    #[test]
    fn rejects_invalid_email() {
        let result = User::new("Bob", "not-an-email");
        assert!(result.is_err());
        assert!(result.unwrap_err().contains("invalid email"));
    }
}

断言宏

assert_eq!(2 + 2, 4);                                    // Equality
assert_ne!(2 + 2, 5);                                    // Inequality
assert!(vec![1, 2, 3].contains(&2));                     // Boolean
assert_eq!(value, 42, "expected 42 but got {value}");    // Custom message
assert!((0.1_f64 + 0.2 - 0.3).abs() < f64::EPSILON);   // Float comparison

错误与 Panic 测试

测试 Result 返回值

#[test]
fn parse_returns_error_for_invalid_input() {
    let result = parse_config("}{invalid");
    assert!(result.is_err());

    // Assert specific error variant
    let err = result.unwrap_err();
    assert!(matches!(err, ConfigError::ParseError(_)));
}

#[test]
fn parse_succeeds_for_valid_input() -> Result<(), Box<dyn std::error::Error>> {
    let config = parse_config(r#"{"port": 8080}"#)?;
    assert_eq!(config.port, 8080);
    Ok(()) // Test fails if any ? returns Err
}

测试 Panic

#[test]
#[should_panic]
fn panics_on_empty_input() {
    process(&[]);
}

#[test]
#[should_panic(expected = "index out of bounds")]
fn panics_with_specific_message() {
    let v: Vec<i32> = vec![];
    let _ = v[0];
}

集成测试

文件结构

my_crate/
├── src/
│   └── lib.rs
├── tests/              # 集成测试
│   ├── api_test.rs     # 每个文件都是一个独立的测试二进制文件
│   ├── db_test.rs
│   └── common/         # 共享测试工具
│       └── mod.rs

编写集成测试

// tests/api_test.rs
use my_crate::{App, Config};

#[test]
fn full_request_lifecycle() {
    let config = Config::test_default();
    let app = App::new(config);

    let response = app.handle_request("/health");
    assert_eq!(response.status, 200);
    assert_eq!(response.body, "OK");
}

异步测试

使用 Tokio

#[tokio::test]
async fn fetches_data_successfully() {
    let client = TestClient::new().await;
    let result = client.get("/data").await;
    assert!(result.is_ok());
    assert_eq!(result.unwrap().items.len(), 3);
}

#[tokio::test]
async fn handles_timeout() {
    use std::time::Duration;
    let result = tokio::time::timeout(
        Duration::from_millis(100),
        slow_operation(),
    ).await;

    assert!(result.is_err(), "should have timed out");
}

测试组织模式

使用 rstest 进行参数化测试

use rstest::{rstest, fixture};

#[rstest]
#[case("hello", 5)]
#[case("", 0)]
#[case("rust", 4)]
fn test_string_length(#[case] input: &str, #[case] expected: usize) {
    assert_eq!(input.len(), expected);
}

// Fixtures
#[fixture]
fn test_db() -> TestDb {
    TestDb::new_in_memory()
}

#[rstest]
fn test_insert(test_db: TestDb) {
    test_db.insert("key", "value");
    assert_eq!(test_db.get("key"), Some("value".into()));
}

测试辅助函数

#[cfg(test)]
mod tests {
    use super::*;

    /// Creates a test user with sensible defaults.
    fn make_user(name: &str) -> User {
        User::new(name, &format!("{name}@test.com")).unwrap()
    }

    #[test]
    fn user_display() {
        let user = make_user("alice");
        assert_eq!(user.display_name(), "alice");
    }
}

使用 proptest 进行基于属性的测试

基本属性测试

use proptest::prelude::*;

proptest! {
    #[test]
    fn encode_decode_roundtrip(input in ".*") {
        let encoded = encode(&input);
        let decoded = decode(&encoded).unwrap();
        assert_eq!(input, decoded);
    }

    #[test]
    fn sort_preserves_length(mut vec in prop::collection::vec(any::<i32>(), 0..100)) {
        let original_len = vec.len();
        vec.sort();
        assert_eq!(vec.len(), original_len);
    }

    #[test]
    fn sort_produces_ordered_output(mut vec in prop::collection::vec(any::<i32>(), 0..100)) {
        vec.sort();
        for window in vec.windows(2) {
            assert!(window[0] <= window[1]);
        }
    }
}

自定义策略

use proptest::prelude::*;

fn valid_email() -> impl Strategy<Value = String> {
    ("[a-z]{1,10}", "[a-z]{1,5}")
        .prop_map(|(user, domain)| format!("{user}@{domain}.com"))
}

proptest! {
    #[test]
    fn accepts_valid_emails(email in valid_email()) {
        assert!(User::new("Test", &email).is_ok());
    }
}

使用 mockall 进行模拟

基于特征的模拟

use mockall::{automock, predicate::eq};

#[automock]
trait UserRepository {
    fn find_by_id(&self, id: u64) -> Option<User>;
    fn save(&self, user: &User) -> Result<(), StorageError>;
}

#[test]
fn service_returns_user_when_found() {
    let mut mock = MockUserRepository::new();
    mock.expect_find_by_id()
        .with(eq(42))
        .times(1)
        .returning(|_| Some(User { id: 42, name: "Alice".into() }));

    let service = UserService::new(Box::new(mock));
    let user = service.get_user(42).unwrap();
    assert_eq!(user.name, "Alice");
}

#[test]
fn service_returns_none_when_not_found() {
    let mut mock = MockUserRepository::new();
    mock.expect_find_by_id()
        .returning(|_| None);

    let service = UserService::new(Box::new(mock));
    assert!(service.get_user(99).is_none());
}

文档测试

可执行的文档

/// Adds two numbers together.
///
/// # Examples
///
/// ```
/// use my_crate::add;
///
/// assert_eq!(add(2, 3), 5);
/// assert_eq!(add(-1, 1), 0);
/// ```
pub fn add(a: i32, b: i32) -> i32 {
    a + b
}

/// Parses a config string.
///
/// # Errors
///
/// Returns `Err` if the input is not valid TOML.
///
/// ```no_run
/// use my_crate::parse_config;
///
/// let config = parse_config(r#"port = 8080"#).unwrap();
/// assert_eq!(config.port, 8080);
/// ```
///
/// ```no_run
/// use my_crate::parse_config;
///
/// assert!(parse_config("}{invalid").is_err());
/// ```
pub fn parse_config(input: &str) -> Result<Config, ParseError> {
    todo!()
}

使用 Criterion 进行基准测试

# Cargo.toml
[dev-dependencies]
criterion = { version = "0.5", features = ["html_reports"] }

[[bench]]
name = "benchmark"
harness = false

// benches/benchmark.rs
use criterion::{black_box, criterion_group, criterion_main, Criterion};

fn fibonacci(n: u64) -> u64 {
    match n {
        0 | 1 => n,
        _ => fibonacci(n - 1) + fibonacci(n - 2),
    }
}

fn bench_fibonacci(c: &mut Criterion) {
    c.bench_function("fib 20", |b| b.iter(|| fibonacci(black_box(20))));
}

criterion_group!(benches, bench_fibonacci);
criterion_main!(benches);

测试覆盖率

运行覆盖率

# Install: cargo install cargo-llvm-cov (or use taiki-e/install-action in CI)
cargo llvm-cov                    # Summary
cargo llvm-cov --html             # HTML report
cargo llvm-cov --lcov > lcov.info # LCOV format for CI
cargo llvm-cov --fail-under-lines 80  # Fail if below threshold

覆盖率目标

测试命令

cargo test                        # Run all tests
cargo test -- --nocapture         # Show println output
cargo test test_name              # Run tests matching pattern
cargo test --lib                  # Unit tests only
cargo test --test api_test        # Integration tests only
cargo test --doc                  # Doc tests only
cargo test --no-fail-fast         # Don't stop on first failure
cargo test -- --ignored           # Run ignored tests

最佳实践

应该做：

• 先写测试 (TDD)
• 使用 #[cfg(test)] 模块进行单元测试
• 测试行为，而非实现
• 使用描述性测试名称来解释场景
• 为了更好的错误信息，优先使用 assert_eq! 而非 assert!
• 在返回 Result 的测试中使用 ? 以获得更清晰的错误输出
• 保持测试独立 — 没有共享的可变状态

不应该做：

• 在可以测试 Result::is_err() 时使用 #[should_panic]
• 模拟所有内容 — 在可行时优先考虑集成测试
• 忽略不稳定的测试 — 修复或隔离它们
• 在测试中使用 sleep() — 使用通道、屏障或 tokio::time::pause()
• 跳过错误路径测试

CI 集成

# GitHub Actions
test:
  runs-on: ubuntu-latest
  steps:
    - uses: actions/checkout@v4
    - uses: dtolnay/rust-toolchain@stable
      with:
        components: clippy, rustfmt

    - name: Check formatting
      run: cargo fmt --check

    - name: Clippy
      run: cargo clippy -- -D warnings

    - name: Run tests
      run: cargo test

    - uses: taiki-e/install-action@cargo-llvm-cov

    - name: Coverage
      run: cargo llvm-cov --fail-under-lines 80

记住：测试就是文档。它们展示了你的代码应如何使用。清晰编写并保持更新。

Source: affaan-m/ECC → docs/zh-CN/skills/rust-testing/SKILL.md