Simulink Interactions

Simulink Open Model Interaction

This skill defines conventions for interacting with the Simulink model currently open in MATLAB, using mcp__matlab__evaluate_matlab_code as the primary tool.

Tooling Fallback

If the MATLAB MCP tool is unavailable in the current session but the user explicitly asks for real model creation or modification, fall back to local MATLAB execution such as matlab -batch. State the fallback briefly and keep the workflow identical: inspect, modify, verify, save.

Step 1: Resolve References

Before doing anything, determine what model/system/block(s) the user is referring to.

Selected blocks (plural)

opts = Simulink.FindOptions;
opts.SearchDepth = 1;
blks = getfullname(Simulink.findBlocks(gcs, 'Selected', 'on', opts));

All blocks of a specific type in the current subsystem

opts = Simulink.FindOptions;
opts.SearchDepth = 1;
BlockType = 'Gain'; % replace with actual type
blks = getfullname(Simulink.findBlocksOfType(gcs, BlockType, opts));

All blocks of a specific type in the entire model

BlockType = 'Gain'; % replace with actual type
blks = getfullname(Simulink.findBlocksOfType(bdroot, BlockType));

Step 2: Inspect Before Modifying

Use get_param to read current state before making changes. This helps you confirm you have the right block and understand its current configuration.

get_param(gcb, 'Gain')           % read a specific parameter
get_param(gcb,'DialogParameters')  % list all dialog parameters
get_param(gcb, 'ObjectParameters') % list all available parameters

Step 3: Apply Changes

Use set_param for most property changes:

set_param(gcb, 'Gain', '2')
set_param(gcb, 'BackgroundColor', 'red')

For bulk operations on multiple blocks, iterate over the blks cell array:

for i = 1:numel(blks)
    set_param(blks{i}, 'BackgroundColor', 'yellow');
end

Adding Blocks

When adding blocks, follow these rules:

• Never pass a 'Position' argument to add_block
• Never use set_param(blk, 'Position', ...) or set_param(blk, 'Location', ...)
• Never use Simulink.BlockDiagram.arrangeSystem
• Use getBlockPosition and setBlockDimensions (bundled in utils/) for all positioning
• To read block size, use getBlockDimensions; to resize, use setBlockDimensions
• Add blocks one at a time: add a block, connect it, then position it relative to existing blocks before proceeding to the next

Utility signatures (see utils/ for full source):

[x, y]          = getBlockPosition(block)          % top-left corner
[width, height] = getBlockDimensions(block)         % block size
setBlockPosition(block, x, y)                      % move, preserving size
setBlockDimensions(block, width, height)            % resize, preserving top-left

Never use set_param(block, 'Position', ...) — always use setBlockPosition and/or setBlockDimensions instead.

% Example: add a Gain block to the right of the current block
modelName = bdroot(gcs);
refBlk = gcb;

% 1. Get reference block geometry
[refX, refY] = getBlockPosition(refBlk);
[refW, ~]    = getBlockDimensions(refBlk);

% 2. Add block (no position argument)
newBlk = [modelName '/MyGain'];
add_block('built-in/Gain', newBlk);

% 3. Position it to the right of the reference block
gap = 50;
setBlockPosition(newBlk, refX + refW + gap, refY);

% 4. Connect it
Simulink.connectBlocks(Source,Destination);

Programmatic MATLAB Function Blocks

When editing a MATLAB Function block programmatically, do not assume set_param(block,'Script',...) exists. For MATLAB Function blocks, update the script through MATLABFunctionConfiguration:

blk = 'model/MyMATLABFunction';
cfg = get_param(blk, 'MATLABFunctionConfiguration');
cfg.FunctionScript = sprintf([ ...
    'function y = fcn(u)\n' ...
    '%%#codegen\n' ...
    'y = 2*u;\n' ...
    'end\n']);

If the function body references workspace parameters such as Kp, tau_sys, or Q_max, explicitly create Stateflow.Data entries with Scope = 'Parameter' or Simulink may fail size/type inference during compile:

rt = sfroot;
machine = rt.find('-isa', 'Stateflow.Machine', 'Name', bdroot(blk));
chart = machine.find('-isa', 'Stateflow.EMChart', 'Path', blk);

param = Stateflow.Data(chart);
param.Name = 'Q_max';
param.Scope = 'Parameter';

Without this explicit parameter declaration, a programmatically generated MATLAB Function block can fail with errors like "cannot determine output size/type" even when the same code works interactively.

Common built-in library paths:

• built-in/Gain
• built-in/Product
• built-in/Constant
• built-in/Scope
• built-in/Subsystem

Exception for Inport and Outport use:

• sprintf('simulink/Ports &\nSubsystems/In1')
• sprintf('simulink/Ports &\nSubsystems/Out1')

Exception for Sum. Never use the Sum block, always use Add or Subtract instead:

• sprintf(['simulink/Math\nOperations/Add'])
• sprintf(['simulink/Math\nOperations/Subtract'])

Connecting Blocks

Always use Simulink.connectBlocks to connect blocks — never add_line. This API is more robust and handles port resolution automatically.

% Connect two blocks (Simulink picks the appropriate ports)
Simulink.connectBlocks(srcBlock, dstBlock);

% Connect specific ports when needed
Simulink.connectBlocks([srcBlock '/1'], [dstBlock '/1']);

Signal Logging

When the user asks to log a signal, use Simulink's built-in signal logging on the port directly. Never use a To Workspace block or a To File block.

% Log the first output port of a block
ph = get_param(gcb, 'PortHandles');
set(ph.Outport(1), 'DataLogging', 'on');

% Set the name lf the logged signal
set(ph.Outport(1), 'DataLoggingNameMode', 'SignalName');
set(ph.Outport(1), 'Name', 'mySignalName');

To log a specific block by path instead of gcb:

ph = get_param('modelName/BlockName', 'PortHandles');
set(ph.Outport(1), 'DataLogging', 'on');

After simulation, logged signals are accessible via logsout in the SimulationOutput object (when using sim()) or via Simulink.SimulationData.Dataset.

If the user explicitly asks for To Workspace blocks or named workspace artifacts as deliverables, follow the user's request. The "never use To Workspace" rule is only the default when the user asks to log signals and does not constrain the export mechanism.

Creating Subsystems

When adding a group of related blocks that should live inside a subsystem, add and connect all the blocks first (following the iterative one-at-a-time workflow above), then group them into a subsystem at the end:

% Collect handles of all blocks to group
blocks = [get_param('model/Block1', 'Handle'), ...
          get_param('model/Block2', 'Handle'), ...
          get_param('model/Block3', 'Handle')];

% Group into a subsystem — Simulink handles port creation automatically
Simulink.BlockDiagram.createSubsystem(blocks);

createSubsystem automatically adds the necessary Inport/Outport blocks inside the subsystem and rewires external connections. Do not manually create a Subsystem block and move blocks into it.

Clearing a Subsystem

Simulink.BlockDiagram.deleteContents only accepts a block diagram, not an arbitrary subsystem path. If you need to rebuild a subsystem in place, delete its lines and child blocks manually:

subsys = 'model/MySubsystem';
lines = find_system(subsys, 'FindAll', 'on', 'SearchDepth', 1, 'Type', 'line');
if ~isempty(lines)
    delete_line(lines);
end

blocks = find_system(subsys, 'SearchDepth', 1, 'Type', 'Block');
blocks = setdiff(blocks, {subsys}, 'stable');
for i = 1:numel(blocks)
    delete_block(blocks{i});
end

This is the safe pattern when regenerating subsystem internals from a script.

Step 4: Verify

After making changes, confirm success by reading back the modified parameter or reporting what was changed.

Source: hashgraph-online/awesome-codex-plugins → plugins/summer521521/MATLAB_Simulink_plugin/skills/simulink-interactions/SKILL.md