Invoke Task Conventions

Naming and wiring invoke tasks

inv <namespace>.<task> should read as an imperative command. The namespace is the subject, the task is the action: inv apt.install-base is "apt: install base", inv zsh.fix-history is "zsh: fix history".

This is the mainstream CLI shape, not a local invention — gh pr create, docker image prune, kubectl config set-context are all <subject> <verb>, and Azure CLI mandates it outright ("Commands must follow a [noun] [noun] [verb] pattern"). See references/rationale.md for the prior art and the evidence behind each rule below.

The examples and measurements are from this author's own repo family — power-user-linux-setup, repo-tasks, scaffoldapy-generated projects — because that is where the rules were tried. The rules are invoke's and hold in any tasks.py; substitute your own repos wherever one of those is named.

The three rules

1. Task names lead with a verb. Name the action, not the thing produced — apt.install-base, not apt.base; ai.install-skills, not ai.skills. Azure CLI states the same rule as "all command names should contain a verb."

Multi-word task names put the verb first (zsh.configure-omz, ide.configure-pycharm), with one exception: keep object-first when a pair reads as a family in inv --list and that adjacency is the point — format-check/format-apply, lint-check/lint-apply. Judgment call per case, not a second rule.

2. Community conventions beat the rule. Where a CLI convention already owns a name — status, list, version, check, diff — keep it. inv gnome.status is what a reader's instinct reaches for; gnome.show-status would be more consistent and worse. Same for a task that wraps a named subcommand: deps.tree wraps uv tree and keeps its name.

These names are load-bearing, not just readable: since 2026-08-25 the machine's Claude Code allowlist ([packages.repo-tasks] claude_permissions_allow in power-user-linux-setup's setup.toml) auto-approves inv <ns>.status|check|diff|list|show, <ns>.print-*, <ns>.check-*, <ns>.list-* and <ns>.*-check in every repo, on the strength of the convention alone. A task with one of these names must inspect and never mutate — a deploy.check that also fixes what it finds would run unprompted. Give a mutating task a mutating name (fix, apply, sync, configure).

3. Some namespaces are themselves the action. setup, verify, clean, deploy, test. There the leaf names the scope or object instead: verify.all, clean.caches, deploy.all, test.unit. This is the stated exception to rule 1, not a violation of it — a reader who sees rule 1 alone will flag test.unit as inverted, which has already happened once.

Prefer a subject namespace where one fits. Reach for an action namespace only when the tasks under it genuinely differ by scope rather than by action.

Be consistent about which verb

Pick one verb per meaning and reuse it across namespaces rather than alternating synonyms — install, configure, set, write, create, clean, fix, check, apply, print, render. Azure CLI's guidelines make the same point ("be consistent with the verbs you use across different types of objects") and additionally warn off verbs that collide with a standard meaning.

When a task's docstring already starts with a verb, that verb is usually the name: a task whose docstring began "Cap persistent journal size" belonged at cap-journal-size, and one beginning "List a project's published versions" at list-versions. Several renames in this family were found exactly that way.

Renaming is a code change with a wide blast radius

Do not treat a rename as a string substitution:

• The Python function name changes with the CLI name (invoke derives one from the other), and phase lists or pre= chains reference the function object directly. A missed rename is an AttributeError at import — which is good: inv --list loading at all proves the code side is complete.
• Task names are cited in prose far outside the module. In one 24-task pass: 53 files, including every docs/*.md, the setup.toml header comment, a Dockerfile, CI workflows, bootstrap scripts, and other repos' documentation.
• A mechanical pass cannot tell a CLI name from a Python identifier, and both spellings of the same task appear in the same files. A rename script put [ai.install_skills] into user-facing output labels; no test caught it, because tests do not assert on label text. After any scripted rename, grep the snake spelling inside string literals, and run the task and read its output.
• Check headings. A task name in a Markdown heading changes that page's anchor, and a strict docs build fails on the dangling link. Grep for inbound <page>.md# links before editing.
• Deployed copies need redeploying. If a renamed task is cited in a file that gets installed somewhere — your always-loaded instructions file, an installed skill — editing the repo source is half the change.

Rename outright rather than keeping the old name alive via @task(aliases=[...]). An alias permanently doubles the CLI surface and gives every task a second name in every future search; the cost of a clean break is one session of mistyping.

Wiring traps

An imported task is a published task. Collection.from_module adds every Task object it finds in a module's namespace, and an imported one is indistinguishable from a defined one — so a task pulled in for a pre= chain gets published a second time under the importing module's name. This produced four tasks nobody had declared (quality.unit beside test.unit; dev-env.create, dev-env.allow and dev-env.claude-hook beside the venv/direnv/agents tasks that own them), and went unnoticed long enough that another repo documented one of them as the real name.

Any module that imports a task must declare an explicit module-level namespace, which from_module prefers over its auto-scan:

ns = Collection(setup)  # only what this module actually owns

When citing another repo's task by name, check that repo's module source — not that the command happens to run. A command that works may be an accident of someone's import statement.

A namespace only exists if it's wired. A consumer repo that builds its own Collection from selected upstream modules silently loses any task in a module it doesn't import. Run inv --list after a dependency bump, not just the test suite.

A task may not run anything that waits for typed input

Not through c.run, with or without pty=True. Two independent causes, and the second is fatal on the interpreter this family defaults to:

1. invoke echoes stdin and races the child for it. Runner.should_echo_stdin() is (not using_pty) and isatty(stdin), so a non-pty c.run from a terminal prints every byte it reads — it has put the terminal in cbreak, so otherwise the user would see nothing. Meanwhile sudo reads /dev/tty, the same terminal, and whichever wins a read gets the bytes: the password is printed and the child never sees it, so it re-prompts and the run looks stuck. Demonstrated with a task whose whole body is c.run("head -n 1 > /dev/null") — typing SUPERSECRET prints it back.
2. On Python 3.14, invoke cannot forward stdin at all. terminals.bytes_to_read() calls fcntl.ioctl(stdin, FIONREAD, b" ") — a 2-byte buffer for a 4-byte result. Every Python before 3.14 overflowed it silently; 3.14 hardened fcntl.ioctl and raises SystemError: buffer overflow, killing invoke's stdin thread on the first keystroke. Nothing reaches the child, pty or not. Upstream pyinvoke/invoke#1070, fixes open, unreleased as of invoke 3.0.3.

pty=True is the trap worth naming. It appears to fix cause 1, because the child controls echo on its own pty, and does nothing for cause 2 — so it reads as the correct pattern right up until the interpreter moves under it, and then hangs with no output.

Two shapes satisfy the rule. Run an interactive child as a plain subprocess inheriting the real terminal, and make everything else non-interactive: authenticate sudo once up front and use sudo -n after, give apt DEBIAN_FRONTEND=noninteractive plus --force-confold.

Audit a repo for it with rg 'pty=True', and read every hit — the shape is most common around credential prompts, which is exactly where a hang is least welcome. Found the expensive way on a first inv wsl.install, which hung after the sudo prompt with the password echoed in plain text; both causes were then reproduced in a container across 3.10–3.14.

Auditing an existing repo

inv --list | grep -oP '^ [a-z0-9.-]+' gives the full surface. Read it against the module sources, not from memory — that comparison is what surfaces both violations and tasks nobody declared. Then sort each name into: verb-first already, community convention (rule 2), action namespace (rule 3), or a real violation. Record the conforming-on-purpose cases somewhere durable, because the next reader will otherwise "fix" them — gitflow.feature-start looks like a violation until you know it mirrors git flow feature start.