Playwright Pool

Playwright Pool

Manages a pool of isolated @playwright/mcp browser processes so multiple agents can each hold their own browser session simultaneously. Each agent acquires a session_id, passes it to every browser_* call, and releases it when done.

SETUP WIZARD

Run this section when:

• sync-skills just installed this skill and directed you here
• The user says "set up playwright pool", "install playwright pool", or similar
• The user wants to reconfigure the pool

Step 1: Check prerequisites

Node.js — required to run the MCP server:

node --version

If the command fails or returns a version below 18, tell the user:

"Node.js 18 or later is required. Install it from https://nodejs.org and re-run setup." Then stop.

npx — ships with Node.js, but verify:

npx --version

If this fails, tell the user to reinstall Node.js (npx is bundled with it).

@playwright/mcp — the MCP server package:

The pool server fetches this at runtime via npx @playwright/mcp@latest. Pre-cache it now so the first server startup doesn't trigger a silent download:

npx @playwright/mcp@latest --version

This downloads and caches @playwright/mcp and its dependencies. If it fails (network error, proxy issue), stop and tell the user:

"Could not reach the npm registry. Ensure you have internet access (or HTTPS_PROXY set if behind a proxy) and re-run setup."

Step 2: Detect host tool

Determine whether you are running in Cursor or Claude Code:

• Cursor: Your system prompt identifies you as a Cursor agent, or you have access to the AskQuestion tool.
• Claude Code: Your system prompt identifies you as Claude Code, or you have access to the AskUserQuestion tool.

Set $TOOL to cursor or claude-code for use in all remaining steps.

Step 3: Check if already installed

Claude Code:

claude mcp list 2>&1 | grep playwright-pool

If output shows playwright-pool ... ✓ Connected, it is already registered.

Cursor:

cat ~/.cursor/mcp.json 2>/dev/null | python -c "import json,sys; d=json.load(sys.stdin); print('found' if 'playwright-pool' in d.get('mcpServers',{}) else 'not found')"

If output is found, it is already registered.

If already registered:

• Ask: "playwright-pool is already registered. Do you want to (1) reconfigure it, or (2) skip to usage docs?"
• If reconfigure → continue from Step 4
• If skip → jump to the USAGE section below

Step 4: Ask configuration preferences

Ask the user these questions one at a time. Accept Enter for defaults:

1. Browser — chromium, firefox, or webkit? (default: chromium)
2. Acquire timeout — Seconds to wait when at capacity before erroring? (default: 30)
3. Max concurrent — Hard cap on simultaneous browser processes? (default: unlimited — the pool grows with demand and shrinks back to 1 idle when sessions are released)

Step 5: Install browser binaries

Now that the browser choice is known, tell the user:

"Playwright needs to download the [chosen browser] binary (~150 MB). This is a one-time download stored in Playwright's local cache. Proceed?"

Wait for confirmation before continuing. If the user declines:

"You can run npx playwright install [browser] manually whenever you're ready, then re-run this setup." Then stop.

Once confirmed:

npx playwright install <chosen-browser>

Safe to re-run — skips the download if the binary is already installed.

If the install fails:

• On Linux: system dependencies may be missing — run npx playwright install-deps <browser> first, then retry
• Behind a corporate proxy: set the HTTPS_PROXY environment variable

Step 6: Locate the server source files

The server source files were installed alongside this SKILL.md by sync-skills. Find them based on $TOOL:

Claude Code — macOS/Linux:

ls ~/.claude/commands/playwright-pool/server/index.js 2>/dev/null && echo "found at global"
ls .claude/commands/playwright-pool/server/index.js 2>/dev/null && echo "found at workspace"

Claude Code — Windows (Git Bash):

ls "$USERPROFILE/.claude/commands/playwright-pool/server/index.js" 2>/dev/null && echo "found at global"
ls .claude/commands/playwright-pool/server/index.js 2>/dev/null && echo "found at workspace"

Cursor — macOS/Linux:

ls ~/.cursor/skills/playwright-pool/server/index.js 2>/dev/null && echo "found at global"
ls .cursor/skills/playwright-pool/server/index.js 2>/dev/null && echo "found at workspace"

Cursor — Windows (Git Bash):

ls "$USERPROFILE/.cursor/skills/playwright-pool/server/index.js" 2>/dev/null && echo "found at global"
ls .cursor/skills/playwright-pool/server/index.js 2>/dev/null && echo "found at workspace"

Use whichever location has the files. If neither is found: "Server source files are missing. Please re-run sync-skills to reinstall playwright-pool."

Set $SKILL_SERVER_DIR to the directory containing index.js.

Step 7: Deploy the server files

Claude Code — macOS/Linux:

mkdir -p ~/.claude/mcp-servers/playwright-pool
cp "$SKILL_SERVER_DIR/index.js"     ~/.claude/mcp-servers/playwright-pool/index.js
cp "$SKILL_SERVER_DIR/package.json" ~/.claude/mcp-servers/playwright-pool/package.json

Claude Code — Windows (Git Bash):

mkdir -p "$USERPROFILE/.claude/mcp-servers/playwright-pool"
cp "$SKILL_SERVER_DIR/index.js"     "$USERPROFILE/.claude/mcp-servers/playwright-pool/index.js"
cp "$SKILL_SERVER_DIR/package.json" "$USERPROFILE/.claude/mcp-servers/playwright-pool/package.json"

Cursor — macOS/Linux:

mkdir -p ~/.cursor/mcp-servers/playwright-pool
cp "$SKILL_SERVER_DIR/index.js"     ~/.cursor/mcp-servers/playwright-pool/index.js
cp "$SKILL_SERVER_DIR/package.json" ~/.cursor/mcp-servers/playwright-pool/package.json

Cursor — Windows (Git Bash):

mkdir -p "$USERPROFILE/.cursor/mcp-servers/playwright-pool"
cp "$SKILL_SERVER_DIR/index.js"     "$USERPROFILE/.cursor/mcp-servers/playwright-pool/index.js"
cp "$SKILL_SERVER_DIR/package.json" "$USERPROFILE/.cursor/mcp-servers/playwright-pool/package.json"

Then write config.json with the user's preferences from Step 4:

{
  "playwrightArgs": ["--isolated", "--browser=<browser>"],
  "acquireTimeoutMs": <timeout seconds * 1000>
}

If the user specified a maxConcurrent value, add it:

{
  "maxConcurrent": <max concurrent>,
  "playwrightArgs": ["--isolated", "--browser=<browser>"],
  "acquireTimeoutMs": <timeout seconds * 1000>
}

Claude Code: write to ~/.claude/mcp-servers/playwright-pool/config.json Cursor: write to ~/.cursor/mcp-servers/playwright-pool/config.json

Step 8: Register the MCP server

Claude Code — macOS/Linux:

claude mcp add playwright-pool --scope user -- node "$HOME/.claude/mcp-servers/playwright-pool/index.js"

Claude Code — Windows (Git Bash):

claude mcp add playwright-pool --scope user -- node "$USERPROFILE/.claude/mcp-servers/playwright-pool/index.js"

Cursor (all platforms) — use Python to safely merge into ~/.cursor/mcp.json, creating the file if it doesn't exist:

python -c "
import json, pathlib
home = pathlib.Path.home()
p = home / '.cursor' / 'mcp.json'
cfg = json.loads(p.read_text()) if p.exists() else {}
cfg.setdefault('mcpServers', {})['playwright-pool'] = {
    'command': 'node',
    'args': [str(home / '.cursor' / 'mcp-servers' / 'playwright-pool' / 'index.js')]
}
p.write_text(json.dumps(cfg, indent=2))
print('Registered playwright-pool in ~/.cursor/mcp.json')
"

Verify registration:

Claude Code:

claude mcp list 2>&1 | grep playwright-pool

Cursor: re-run the check from Step 3 and confirm output is found.

Step 9: Confirm and instruct

Report what was configured:

• Tool: Claude Code or Cursor
• Pool size, browser, and timeout chosen
• Server deployed to: ~/.claude/mcp-servers/playwright-pool/ or ~/.cursor/mcp-servers/playwright-pool/
• Config at: [server dir]/config.json

Then tell the user:

Claude Code:

Reload your Claude Code window to activate playwright-pool. After reloading, browser_pool_acquire, browser_navigate, and all other browser tools will appear in your agent's tool list. To change settings later: edit the config.json above and reload the window.

Cursor:

Fully restart Cursor (not just reload window) to activate playwright-pool. After restarting, browser pool tools will appear. You can verify in Cursor Settings > Tools and MCP. To change pool size later: edit the config.json above and restart Cursor.

USAGE

Use this section when an agent needs browser automation in a multi-agent or parallel context.

Why sessions are required

All agents share one MCP connection. Without the pool, every agent's browser calls go to the same browser instance — causing state contamination and blocking. The pool proxy manages N isolated @playwright/mcp processes and routes each agent's calls to its own dedicated browser.

Mandatory workflow

Every agent that needs a browser must follow this three-step pattern:

1. Acquire a session

browser_pool_acquire({ label: "agent-name-or-task" })
→ { session_id: "s2-1719000000000", pool_status: { total: 2, available: 1, busy: 1, spawning: 0, queued: 0 } }

A warm browser is always kept on standby, so this returns instantly. If the standby is still spawning (rare: burst of concurrent acquires), the call waits for it. If maxConcurrent is set and reached, this call blocks and queues (up to acquireTimeoutMs). Do not poll — just await the result.

2. Use the browser — pass session_id to every call

browser_navigate({ session_id: "s2-...", url: "https://example.com" })
browser_snapshot({ session_id: "s2-..." })
browser_click({ session_id: "s2-...", ref: "button#submit" })

Every browser_* call requires session_id. Calls without it fail immediately.

3. Always release when done

browser_pool_release({ session_id: "s2-..." })

Always release — even if an error occurred. Unreleased sessions stay busy until the pool restarts.

Pool management tools

Pool sizing

The pool is self-sizing: it keeps exactly 1 idle browser (the warm standby) and grows as needed. At any moment, total processes = active sessions + 1. You never configure a pool size.

To add an optional hard cap (e.g. prevent runaway parallelism), set maxConcurrent in config.json:

{
  "maxConcurrent": 8,
  "playwrightArgs": ["--isolated", "--browser=chromium"],
  "acquireTimeoutMs": 30000
}

Without maxConcurrent, the pool is unbounded.

Error reference