Clawpatch

Clawpatch — agent workflow

Clawpatch (openclaw/clawpatch, https://clawpatch.ai) is an agent-driven CLI: it reviews a repo into structured findings and can apply validated per-finding fixes. It needs Node.js 22+ and a provider CLI (codex by default); fix refuses dirty source worktrees by default, while review/ci/revalidate can include dirty code when explicitly scoped.

This skill is judgment + orchestration, not a CLI reference. For exact flags, JSON fields, and exit codes, trust clawpatch <cmd> --help and the live --json output over anything written here — Clawpatch is pre-1.0 and its surface drifts, so a written copy will mislead. What this skill carries is what --help can't tell you: when to reach for it, how to fix findings in parallel, and the traps.

When to use

Use Clawpatch when the user names it, or wants whole-repo automated review that yields locatable findings plus optional validated fixes.

Don't use it for: a small diff already under review (a whole-repo review cycle is overkill — use a diff-review tool); a bug the user already understands and just wants written; or when no provider CLI (codex/claude/cursor/grok/ opencode/pi/acpx, or mock for tests) is installed — clawpatch doctor fails fast, so say so and stop.

Setup

clawpatch doctor verifies the install and the provider. The published CLI requires Node.js 22+. If clawpatch is missing, install the current published package (npm install -g clawpatch@0.7.2). The provider (codex by default) is the user's to install and authenticate — don't run login flows on their behalf.

Gitignore .clawpatch/ early to keep status, commits, and PR diffs clean. Clawpatch allows its own state directory to change during runs; fix's dirty guard is for source worktree changes, not .clawpatch/ churn. Add the single line .clawpatch/ before review/fix when the repo doesn't already ignore it, but remember .gitignore is tracked — confirm with the user before editing it.

Review → findings

The pipeline is init → map → review → report. init and heuristic map are local and cheap; review is the expensive step (~30–60s per feature with codex) and runs with a bounded worker pool by default.

For a first whole-repo pass, clawpatch ci runs that pipeline in one call and writes the same .clawpatch/ findings the staged steps would — so "ci → pick a fix path" is a fine default. Drop to the staged commands only when you need to sample before sweeping a large or paid provider (review --limit 3, below), scope to a slice (review --since <ref>), or resume an existing review as code moves (revalidate / review --since, below). Either way ci stops at findings — it never fixes or opens PRs; fixing stays the paths under "Choose how to fix."

Run init && map directly — they're idempotent and non-destructive, so an existing .clawpatch/ just gets refreshed (init no-ops without --force; heuristic map re-classifies). No scan, no --force. map writes one JSON file per feature — the subsystem-sized unit (a package, a command, a service) that both review and scoping operate on — into .clawpatch/features/. If deterministic mapping is too shallow, clawpatch map --source auto can add read-only provider-assisted slices; use --source agent only when you deliberately want provider mapping even if heuristics found enough.

State persists in .clawpatch/ and there's no natural point where the agent deletes it, so findings — and their fixed/wont-fix/uncertain statuses — carry across runs. That persistence is intentional: Clawpatch owns resume and freshness, so use its commands instead of hand-managing or wiping findings. When code has moved since the last review:

• clawpatch revalidate --since <ref> (or --all) re-checks existing findings against the current code and updates their statuses — this is the CLI's de-stale mechanism.
• clawpatch review --since <ref> reviews only the features changed since <ref>, including changed features regardless of previous review status, without a full re-review.

Prefer those over trusting stale statuses or wiping. Wiping ([ -d .clawpatch ] && rm -r .clawpatch — guarded, never rm -rf) is a last resort for genuinely corrupt state, not the freshness tool — it discards resume context and costs a full re-review. (There's no --resume flag; "resume" just means the on-disk state is still there.) Use clawpatch triage --finding <id> --status <status> --note <text> to mark false positives or decisions; it preserves the finding and appends history instead of rewriting JSON by hand.

On a large or unfamiliar repo, smoke-test first (review --limit 3) and treat that as often-sufficient — surface the time/cost before committing to a full sweep (ci or review). For cost control on broader runs, --jobs defaults to roughly half the CPU cores (max 10); lower it or use --rate-limit-per-minute / CLAWPATCH_RPM when provider spend or quotas matter.

By default review sees only committed code; --include-dirty (on review, ci, and revalidate) pulls uncommitted worktree changes into scope — reach for it to review in-progress work before it's committed. It's a review-scope switch, not a fix dirty-tree override (Safety).

Use clawpatch review --mode deslopify when the user wants slop, maintainability, or performance cleanup. Keep default review mode for ordinary bug, security, API-contract, data-loss, and release-risk review.

Scoping the review

The switches above scope which code review sees; this scopes which features it spends on. review has no path filter — you scope it by selecting features. Each .clawpatch/features/*.json carries an opaque featureId (a hash like feat_library_…, not a 1..N index — passing a number silently matches nothing and the run reviews zero features) plus its title and ownedFiles[].path. To review only what the user named ("just the Go code", "only the auth package", "ignore the docs"), translate paths → ids yourself, then pass them. For more than a one-off id, prefer --feature-list: it reads one feature id per line, keeps first-seen order, and de-duplicates:

for f in .clawpatch/features/*.json; do
  jq -r '[.featureId,.title,((.ownedFiles//[])|map(.path)|join(","))]|@tsv' "$f"
done                                   # read the table, pick ids, then:
printf '%s\n' <id> <id> > /tmp/clawpatch-features.txt
clawpatch review --feature-list /tmp/clawpatch-features.txt

Repeated --feature <id> still works for short ad hoc selections. Confirm mutual exclusions in clawpatch review --help before mixing feature selection with --since, --project, or dirty-worktree scoping.

--limit <n> is the cheapness knob (first N features in map order) — right for a smoke test, useless for targeting an area; reach for --feature when the user names a subsystem. All Clawpatch state (features, findings, reports) is plain JSON under .clawpatch/, so read it directly when a --json payload is too large to scan or a wrapper truncates it.

Read findings from report --json. The full flag set is clawpatch report --help; two non-obvious traps it won't flag for you:

• --json writes the JSON to stdout; --output writes Markdown. Capture JSON by redirecting stdout (> findings.json), not --output.
• In 0.7.2 the shape is { "findings": <count>, "total": <count>, "output": <path|null>, "items": [ … ], "results": [ … ] }. findings is a deprecated count, not the array; read .items[] (.results[] is an alias). Field names still drift from prose docs (the id is id; evidence uses path/startLine/endLine). Probe before parsing: jq 'keys, .items[0]' findings.json.

Each finding already carries fix-ready prose — title, reasoning, reproduction, recommendation, suggestedRegressionTest, minimumFixScope — ready to drop into a fix prompt or PR body. Ignore the next: hint Clawpatch prints; rank findings yourself (severity → confidence → triage), and never auto-fix without the user's pick (providers emit false positives).

Choose how to fix: scanner-only vs full-cycle

Scanner-only (default, and the only safe parallel path). Use Clawpatch purely as the reviewer; the host agent fixes findings with its own tooling. Required when the user wants fixes in parallel, the repo has strict commit/PR conventions, you want control over each patch, or the host model beats the provider's.

Full-cycle. Let clawpatch fix produce and validate the patch. Fine for single-developer, sequential work in a low-ceremony repo where you trust the provider and want its format/typecheck/lint/test gate.

The two are mutually exclusive — never run clawpatch fix from dispatched subagents (see Safety).

Scanner-only dispatch

1. init → map → review, then report --json > /tmp/findings.json, in a throwaway worktree.
2. Pick findings to fan out; prefer ones whose minimumFixScope/evidence paths don't overlap, so subagents can't collide.
3. Per finding: extract its JSON (jq '.items[] | select(.id==$id)') and dispatch a subagent in a fresh worktree branched from main (not the review worktree). Paste the finding JSON inline in its prompt.
4. The subagent fixes with the host's normal edit/test/commit/PR tooling and never calls clawpatch. Tell it to confirm the finding is real before changing anything (false positives) and to stay within minimumFixScope (no over-correcting).
5. The review worktree and its .clawpatch/ are disposable — discard after. Don't reconcile fixed-status back into .clawpatch/; the audit trail is git (PRs, commit trailers).

Full-cycle

On a clean worktree, clawpatch fix --finding <id>. On success the finding goes to uncertain, not fixed — confirm with clawpatch revalidate --finding <id>. Then ship with clawpatch open-pr --patch <patchAttemptId> --draft (Clawpatch writes a finding-rich PR body) or hand the diff to your own commit/PR flow. Check flags with clawpatch fix --help. fix has no dirty-tree --force; clean or stash source changes first, or use --dry-run only for a preview. Never run two fixes in parallel on one .clawpatch/ (feature locks serialize them; interleaved patches don't merge). Stop and report on the first surprise: validation failure (exit 6 → git restore .), an oversized diff, or repeated wont-fix.

Safety & pitfalls

• Never clawpatch open-pr --force without explicit user approval — it overrides the failed-validation guard. fix has no --force; keep the clean source-worktree preflight intact. Clawpatch does not merge/land PRs today (there's no land command); if a merge/land command ever appears, treat it the same way — never run it without approval.
• Never combine subagents with clawpatch fix. Sharing .clawpatch/ across subagents risks patches landing in the wrong worktree (evidence paths resolve against the original rootPath); copying state per subagent is fragile. Pick one mode and stay in it.
• Don't blind-retry a non-zero exit. Codes are typed (3 = dirty tree, 4 = provider auth, 6 = validation failed, 7 = lock). On lock failures, try clawpatch clean-locks --stale-only first; use unfiltered clean-locks only after confirming no local or remote review process is active. clawpatch --help / the spec has the full set.
• Treat this doc as fallible. Verify any flag, field, or exit-code detail against clawpatch <cmd> --help and live --json output — they're the source of truth; this skill is the workflow around them.