Agent Teams

Agent Teams

Experimental: Agent teams require the --enable-teams flag and may change between Claude Code versions.

When to Use This Skill

Sub-Agent Caveat: Spawn Teams from the Main Thread

TeamCreate, Agent, and the related parallel-spawn tools may not be present in a sub-agent's tool surface, even if the parent conversation has them. A sub-agent designed to orchestrate its own team can silently degrade to sequential single-thread execution — same content, much longer wall-clock — without surfacing the failure until its post-completion summary.

Authoring guidance:

Detection contract for coordinating sub-agents:

Brief the orchestrating sub-agent to verify before dispatching:

1. Confirm Agent / TeamCreate are callable. If unavailable (e.g. ToolSearch
   does not surface them, or invocation returns "tool not found"), do NOT
   silently fall back.
2. Report the constraint as the first line of the final summary:
   "Parallel fan-out unavailable in this sandbox; executed sequentially."
3. Continue sequentially with the same input contract — outputs should be
   identical in content, only longer in wall-clock.

The wall-clock cost is real: a 5-way fan-out that degrades to sequential takes ~5× longer. Plan top-level orchestration in the main conversation when you can; reserve sub-agent orchestrators for cases where the team's outputs do not need to feed back into the main thread.

Evidence: a Phase 2 portability-audit dispatch instructed a coordinating sub-agent to spawn 5 parallel auditors via Agent; the Agent tool was not registered in the sub-agent's sandbox. Output was equivalent but wall-clock was much longer than designed, and the failure surfaced only in the post-completion note.

Core Concepts

Team Architecture

Lead Agent (orchestrator)
    ├── TeamCreate — creates team + shared task list
    ├── Agent tool — spawns teammate agents
    ├── SendMessage — communicates with teammates
    ├── TaskUpdate — assigns tasks to teammates
    └── Teammates (run in parallel)
            ├── Read team config from ~/.claude/teams/<name>/config.json
            ├── TaskList/TaskUpdate — claim and complete tasks
            └── SendMessage — report back to lead

Native Team Tools

Team Setup Workflow

1. Create the Team

TeamCreate({
  team_name: "my-project",
  description: "Working on feature X"
})

This creates:

• ~/.claude/teams/<team-name>/ — team config directory
• ~/.claude/tasks/<team-name>/ — shared task list directory

2. Create Initial Tasks

TaskCreate({
  team_name: "my-project",
  title: "Implement security review",
  description: "Audit auth module for vulnerabilities",
  status: "pending"
})

3. Spawn Teammates

Use the Agent tool to spawn each teammate with the team context:

Agent tool with:
  subagent_type: "agents-plugin:security-audit"
  team_name: "my-project"
  name: "security-reviewer"
  prompt: "Join team my-project and work on security review task..."

4. Assign Tasks

TaskUpdate({
  team_name: "my-project",
  task_id: "task-1",
  owner: "security-reviewer",
  status: "in_progress"
})

5. Receive Results

Teammates send messages automatically — they are delivered to the lead's inbox between turns. No polling needed.

Task Management

Task States

Task Priority

Teammates should claim tasks in ID order (lowest first) — earlier tasks often set up context for later ones.

TaskList Usage

Teammates should check TaskList after completing each task to find available work:

TaskList({ team_name: "my-project" })
→ Returns all tasks with status, owner, and blocked-by info

Claim an unassigned task:

TaskUpdate({ team_name: "my-project", task_id: "N", owner: "my-name" })

Communication (SendMessage)

Message Types

DM Example

SendMessage({
  type: "message",
  recipient: "security-reviewer",  // Use NAME, not agent ID
  content: "Please also check the payment module",
  summary: "Adding payment module to scope"
})

Broadcast (use sparingly)

SendMessage({
  type: "broadcast",
  content: "Stop all work — critical blocker found in auth module",
  summary: "Critical blocker: halt work"
})

Broadcasting sends a separate delivery to every teammate. With N teammates, that's N API round-trips. Reserve for genuine team-wide blockers.

Teammate Behavior

Discovering Team Members

Read the team config to find other members:

Read ~/.claude/teams/<team-name>/config.json
→ members array with name, agentId, agentType

Always use the name field (not agentId) for recipient in SendMessage.

Idle State

Teammates go idle after every turn — this is normal. Idle ≠ unavailable. Sending a message to an idle teammate wakes them.

Key Teammate Rules

• Mark exactly ONE task in_progress at a time
• Use TaskUpdate (not SendMessage) to report task completion
• System sends idle notifications automatically — no need for status JSON messages
• All communication requires SendMessage — plain text output is NOT visible to the team lead

Shutdown Procedures

Graceful Shutdown (Lead → Teammates)

SendMessage({
  type: "shutdown_request",
  recipient: "security-reviewer",
  content: "All tasks complete, wrapping up"
})

Teammate Approves Shutdown

SendMessage({
  type: "shutdown_response",
  request_id: "<id from shutdown_request JSON>",
  approve: true
})

Cleanup (Lead)

After all teammates shut down:

TeamDelete()
→ Removes ~/.claude/teams/<name>/ and ~/.claude/tasks/<name>/

TeamDelete fails if teammates are still active.

Lead Preflight Checklist

Before drafting the PRP and launching agents, run these checks:

A 30-second sweep prevents multi-edit renaming work after agents return.

Out-of-Scope Discovery Protocol

Include this protocol in every agent's prompt when that agent has an exclusive write scope:

### Out-of-scope discovery protocol

If you discover that a file outside your declared write scope needs to change
for your deliverables to work:

1. **STOP immediately.** Do not read, investigate, or edit the out-of-scope file.
2. In your final summary, include a section titled `Out-of-scope dependencies` that lists:
   - The file(s) that need changes
   - What changes are needed (one line each)
   - Which of your deliverables is blocked without those changes
3. Exit. The lead will triage and either expand your scope, reassign to another agent,
   or handle it directly.

This prevents the "investigate out of scope → exhaust budget → truncated summary" failure mode. The lead can then address the dependency before the next phase or assign a follow-up issue.

Worktree-Isolated Edit/Write Path Resolution

Known failure mode (worktree isolation): Agents launched with isolation: "worktree" may have Edit/Write tool calls silently resolve relative paths against the parent repo rather than the agent's worktree, even though Bash commands and git status correctly operate inside the worktree. The agent gets no immediate signal that file writes are landing on the wrong branch — commits can land on a sibling agent's branch or on the parent repo's working tree. Cleanup requires cherry-pick + rebase drop-if-upstream after the fact.

Tracking: laurigates/claude-plugins#1091

The bug lives in Claude Code's worktree path-resolution layer (upstream). Until it is fixed, harden every worktree-isolated agent prompt with the preamble below and run the post-flight check before merging.

Recommended agent-prompt preamble

Paste this verbatim at the top of any worktree-isolated agent's prompt — before any other instructions or task description:

**First action MUST be:**

  pwd
  git rev-parse --show-toplevel
  ls -la

**All file edits must use absolute paths rooted at your worktree.**
**If `Edit` or `Write` appears to target anything outside your worktree,
stop and report — do not retry.**

The three commands give the agent (and the transcript reader) an unambiguous signal of where it actually is. Absolute paths bypass the relative-resolution bug entirely. The "stop and report" clause prevents the recovery-by-retry loop that compounds the damage.

Lead post-flight check

After agents return, run from the parent repo before merging:

git diff origin/main..HEAD     # parent's intended branch should be clean
git status --porcelain         # no straggler edits in parent worktree

If either is non-empty, an agent's Edit/Write leaked into the parent. Inspect the diff before any further git operations.

Recovery pattern

If a stray commit lands on the wrong branch:

1. Cherry-pick the commit onto the intended branch: git cherry-pick <stray-sha>.
2. Rewrite the wrong branch to drop the duplicate. Rebase onto the correct base with drop-if-upstream so git removes the commit that already exists upstream: git rebase --onto <new-base> <old-base> <wrong-branch> (run with git config rebase.dropOnUpstream true or use git rebase -i and delete the duplicate line).
3. Verify with git log --oneline <wrong-branch> ^<intended-branch> that only the wrong-branch's own commits remain.

For the broader concurrency context (shared-clone vs. worktree coordination), see .claude/rules/agent-coworker-detection.md.

Common Patterns

Parallel Code Review

TeamCreate: "code-review"
Tasks: security-audit, performance-review, correctness-check
Teammates: security-agent, performance-agent, correctness-agent (all parallel)
Lead: collects results, synthesizes findings

Parallel Implementation with Worktrees

TeamCreate: "feature-impl"
Tasks: backend-api, frontend-ui, tests
Teammates: each spawned with isolation: "worktree"
Lead: delegates git push (sub-agents must not push independently in sandbox)

Multi-Phase Architecture Refactor

Phase 1 (3 parallel):  Framework upgrade + new module scaffolding + ADR draft
Phase 2 (1 serialized): Reactive executor — depends on Phase 1 contracts
Phase 3 (1 serialized): Wire-up + legacy deletion — exclusive main.c owner
Phase 4 (2 parallel):  Host tests + documentation finalization

Key rules:
- One owner per file across ALL phases (exclusive write scope per agent)
- "Agent writes, lead commits" — keep branch coherent between phases
- Phase boundaries = commit points (clean checkpoint semantics)
- Phase 3 deletion runs AFTER Phases 1–2 finalize their contracts

Real-world outcome: +1850/−1826 lines, zero file-scope collisions across 6 agents, tests exposed a bug on first build. See also: the Out-of-Scope Discovery Protocol above — include it in every focused-scope agent prompt.

Blocked Task Resolution

If a task is blocked on another, set the blocked_by field in TaskCreate. Teammates check TaskList and skip blocked tasks until the blocking task is completed.

Team Roles

Sandbox Considerations

In web sessions (CLAUDE_CODE_REMOTE=true):

• Sub-agents (teammates) may encounter TLS errors on git push — delegate all push/PR operations to the lead
• Each teammate runs in its own process context
• Worktree isolation is recommended for independent filesystem changes

Agentic Optimizations

Quick Reference

Workflow Checklist

• TeamCreate with team name and description
• TaskCreate for each work unit
• Spawn teammates via Agent tool with team_name and name
• TaskUpdate to assign tasks to teammates (or let teammates self-assign)
• Receive messages automatically; respond via SendMessage
• SendMessage shutdown_request to each teammate when done
• TeamDelete after all teammates shut down

Key Paths

Common Mistakes

Related Skills and Rules

• parallel-agent-dispatch — worktree preflight, scope budgets, and the Return Contract that every teammate must emit on exit. Team dispatches are a superset of plain parallel fan-out; follow both.
• .claude/rules/agent-development.md — agent file structure, model selection, worktree isolation
• .claude/rules/agentic-permissions.md — granular tool permission patterns
• .claude/rules/sandbox-guidance.md — web sandbox constraints and push delegation

Source: laurigates/claude-plugins — distributed by TomeVault.