Ar4mirez Samuel Assembly Guide

Assembly Guide

Applies to: x86-64 (System V ABI), ARM64 (AAPCS), NASM, GAS syntax

Core Principles

1. Clarity Over Cleverness: Comment every instruction's purpose; assembly lacks self-documentation
2. ABI Compliance: Follow calling conventions precisely for interoperability with C/system code
3. Minimal Register Pressure: Preserve callee-saved registers, minimize spills to stack
4. Correctness First: Get it working correctly, then profile, then optimize with SIMD
5. Structured Layout: Use consistent label naming, section organization, and macro definitions

Guardrails

Architecture Selection

• Declare target architecture at the top of every file
• x86-64: default for Linux/macOS server and desktop workloads
• ARM64: default for Apple Silicon, mobile, and embedded Linux
• Never mix architecture-specific code without %ifdef / .ifdef guards

Calling Conventions

• x86-64 System V ABI (Linux, macOS, BSD):
  • Arguments: rdi, rsi, rdx, rcx, r8, r9 (integer/pointer, in order)
  • Floating-point arguments: xmm0-xmm7
  • Return value: rax (integer), xmm0 (float)
  • Caller-saved (volatile): rax, rcx, rdx, rsi, rdi, r8-r11
  • Callee-saved (non-volatile): rbx, rbp, r12-r15
  • Stack must be 16-byte aligned before call instruction
• ARM64 AAPCS (Linux, macOS):
  • Arguments: x0-x7 (integer/pointer), d0-d7 (float)
  • Return value: x0 (integer), d0 (float)
  • Callee-saved: x19-x28, x29 (frame pointer), x30 (link register)
  • Stack must be 16-byte aligned at all times

Register Usage

• Document which registers hold which logical values at function entry
• Never clobber callee-saved registers without saving and restoring them
• Use rbp / x29 as frame pointer for debuggability (omit only in leaf functions)
• Reserve scratch registers for temporaries; name them in comments
• Zero-extend results when returning values smaller than 64 bits

Stack Management

• Always maintain 16-byte stack alignment on x86-64 and ARM64
• Allocate local variables by subtracting from rsp / sp in the prologue
• Deallocate in the epilogue before ret (never leave the stack dirty)
• Use red zone (128 bytes below rsp) only in leaf functions on System V ABI
• Never write below the stack pointer outside the red zone

Documentation

• File header: purpose, target architecture, assembler syntax, author
• Function header: C-style prototype comment, argument register mapping, return value
• Inline comments: explain the why, not the what (avoid ; increment counter)
• Label naming: module_function_sublabel (e.g., crypto_sha256_loop)
• Constants: use equ / .equ directives with descriptive names

Key Patterns

x86-64 Function with Frame Pointer

; long compute(long x, long y, long z)
; Args: rdi = x, rsi = y, rdx = z
; Returns: rax = x * y + z
global compute
compute:
    push    rbp                 ; save frame pointer
    mov     rbp, rsp            ; establish stack frame
    mov     rax, rdi            ; rax = x
    imul    rax, rsi            ; rax = x * y
    add     rax, rdx            ; rax = x * y + z
    pop     rbp                 ; restore frame pointer
    ret

ARM64 AAPCS Function

// int64_t multiply_add(int64_t a, int64_t b, int64_t c)
// Args: x0 = a, x1 = b, x2 = c  |  Returns: x0 = a * b + c
    .global multiply_add
multiply_add:
    stp     x29, x30, [sp, #-16]!  // save fp and lr
    mov     x29, sp                 // establish stack frame
    mul     x0, x0, x1              // x0 = a * b
    add     x0, x0, x2              // x0 = a * b + c
    ldp     x29, x30, [sp], #16     // restore fp and lr
    ret

SIMD / SSE2 (4 floats per iteration)

; void add_f32(float *dst, const float *a, const float *b, size_t n)
; Args: rdi = dst, rsi = a, rdx = b, rcx = n
global add_f32
add_f32:
    shr     rcx, 2              ; n /= 4
.loop:
    test    rcx, rcx
    jz      .done
    movups  xmm0, [rsi]        ; load 4 floats from a
    addps   xmm0, [rdx]        ; add 4 floats from b
    movups  [rdi], xmm0        ; store result
    add     rsi, 16
    add     rdx, 16
    add     rdi, 16
    dec     rcx
    jnz     .loop
.done:
    ret

Linux x86-64 Syscall Interface

; Syscall: rax = number, args in rdi/rsi/rdx/r10/r8/r9, return in rax
; Note: r10 replaces rcx (clobbered by syscall instruction)
SYS_WRITE equ 1
SYS_EXIT  equ 60

section .data
    msg db "Hello, world!", 10
    msg_len equ $ - msg

section .text
global _start
_start:
    mov     rax, SYS_WRITE      ; write(stdout, msg, msg_len)
    mov     rdi, 1               ; fd = STDOUT
    lea     rsi, [rel msg]       ; RIP-relative for PIC
    mov     rdx, msg_len
    syscall
    mov     rax, SYS_EXIT        ; exit(0)
    xor     edi, edi
    syscall

Position-Independent Code (PIC)

default rel                     ; all memory refs become RIP-relative

section .data
    counter dq 0

section .text
global get_counter
get_counter:
    mov     rax, [counter]      ; RIP-relative with default rel
    ret

global increment_counter
increment_counter:
    lock inc qword [counter]    ; atomic increment (thread-safe)
    mov     rax, [counter]
    ret

Debugging

GDB Commands

gdb ./program
(gdb) layout asm                # show disassembly window
(gdb) layout regs               # show registers window
(gdb) stepi                     # step one instruction
(gdb) nexti                     # step over call
(gdb) info registers            # print all register values
(gdb) p/x $rax                  # print rax in hex
(gdb) x/4gx $rsp               # examine 4 quad-words at stack pointer
(gdb) break *0x401000           # break at address
(gdb) display/i $pc             # show current instruction after each step
(gdb) set disassembly-flavor intel

objdump & strace

objdump -d -M intel program     # disassemble with Intel syntax
objdump -h program              # show section headers
objdump -t program              # show symbol table
objdump -r program.o            # show relocations (PIC debugging)

strace ./program                # trace all syscalls
strace -e trace=write,read ./program  # filter specific syscalls

Tooling

Assemblers & Linkers

# NASM (Intel syntax)
nasm -f elf64 -g -F dwarf program.asm -o program.o   # Linux
nasm -f macho64 program.asm -o program.o              # macOS

# GAS (AT&T syntax, supports .intel_syntax)
as --64 -g program.s -o program.o

# LLVM
clang -c program.s -o program.o

# Linking
ld -o program program.o               # bare metal (no libc)
gcc -o program program.o              # with libc (C interop)
gcc -shared -o libfoo.so foo.o        # shared library (requires PIC)

Verification

nm program.o                    # verify symbol visibility
nm -u program.o                 # check undefined references
readelf -S program.o            # verify section layout
# In GDB: p/x $rsp & 0xf       # should be 0x0 at call boundaries

References

For detailed patterns and code examples, see:

• references/patterns.md -- Prologue/epilogue, syscall examples, SIMD patterns

External References

• x86-64 System V ABI Specification
• ARM Architecture Reference Manual
• NASM Documentation
• GAS Manual (GNU Assembler)
• Intel Intrinsics Guide (SSE/AVX)
• Linux Syscall Table (x86-64)
• Agner Fog's Optimization Manuals
• Felix Cloutier x86 Instruction Reference

Converted and distributed by TomeVault — claim your Tome and manage your conversions.