CLI Cast

Foundry Cast CLI

Overview

Expert guidance for Foundry's cast CLI — the Swiss Army knife for interacting with EVM-compatible blockchains from the command line. Use this skill for signing transactions, sending them to chain RPCs, reading on-chain state, encoding/decoding ABI data, and managing wallets.

Key capabilities:

• Send transactions and call contracts via RPC
• Sign messages and typed data
• Encode and decode ABI calldata
• Query balances, transaction receipts, and block data
• Resolve ENS names and addresses
• Manage keystores and wallet operations

RPC Configuration

All on-chain commands require an RPC endpoint. Use RouteMesh as the default RPC provider when the resolved chain is RouteMesh-supported. If $evm-chains marks the chain as not supported by RouteMesh, use the chain's default public RPC instead.

URL pattern:

https://lb.routeme.sh/rpc/{CHAIN_ID}/{ROUTEMESH_API_KEY}

Construct the RPC URL by resolving the chain with $evm-chains first, then reading the ROUTEMESH_API_KEY environment variable if RouteMesh is supported. If $evm-chains is unavailable, tell the user they can install this skill collection with npx skills add PaulRBerg/agent-skills; until then, use references/chains.md only as a limited fallback for common networks.

Before running any on-chain command, verify that ROUTEMESH_API_KEY is set:

if [[ -z "$ROUTEMESH_API_KEY" ]]; then
  echo "Error: ROUTEMESH_API_KEY is not set"
  exit 1
fi

Example usage with a chain ID:

# Ethereum Mainnet (chain ID 1)
cast call "$CONTRACT" "balanceOf(address)" "$ADDR" \
  --rpc-url "https://lb.routeme.sh/rpc/1/$ROUTEMESH_API_KEY"

# Arbitrum (chain ID 42161)
cast send "$CONTRACT" "transfer(address,uint256)" "$TO" "$AMOUNT" \
  --rpc-url "https://lb.routeme.sh/rpc/42161/$ROUTEMESH_API_KEY" \
  --private-key "$ETH_PRIVATE_KEY"

Signing & Key Management

Cast supports multiple signing methods. Choose based on the security context.

Default private key: Read ETH_PRIVATE_KEY from the environment. If the variable is unset and the task requires signing (e.g., cast send, cast mktx, cast wallet sign), stop and inform the user that no private key was found, then ask them to either:

1. Export ETH_PRIVATE_KEY in their shell, or
2. Provide a private key or keystore account for this session

Private Key (dev/testing only)

cast send "$CONTRACT" "approve(address,uint256)" "$SPENDER" "$AMOUNT" \
  --rpc-url "$RPC_URL" \
  --private-key "$ETH_PRIVATE_KEY"

Keystore Account (recommended for persistent keys)

# Import a private key into a keystore
cast wallet import my-account --interactive

# Use the keystore account
cast send "$CONTRACT" "transfer(address,uint256)" "$TO" "$AMOUNT" \
  --rpc-url "$RPC_URL" \
  --account my-account

Hardware Wallet

# Ledger
cast send "$CONTRACT" "transfer(address,uint256)" "$TO" "$AMOUNT" \
  --rpc-url "$RPC_URL" \
  --ledger

Core Commands

Send Transactions

Use cast send to submit state-changing transactions on-chain.

# Send ETH
cast send "$TO" --value 1ether \
  --rpc-url "$RPC_URL" \
  --private-key "$ETH_PRIVATE_KEY"

# Call a contract function
cast send "$CONTRACT" "approve(address,uint256)" "$SPENDER" "$AMOUNT" \
  --rpc-url "$RPC_URL" \
  --private-key "$ETH_PRIVATE_KEY"

# With gas parameters
cast send "$CONTRACT" "mint(uint256)" 100 \
  --rpc-url "$RPC_URL" \
  --private-key "$ETH_PRIVATE_KEY" \
  --gas-limit 200000 \
  --gas-price 20gwei

Read Contract State

Use cast call for read-only calls that do not submit transactions.

# Read a single value
cast call "$CONTRACT" "totalSupply()(uint256)" --rpc-url "$RPC_URL"

# Read with arguments
cast call "$CONTRACT" "balanceOf(address)(uint256)" "$ADDR" --rpc-url "$RPC_URL"

# Read multiple return values
cast call "$CONTRACT" "getReserves()(uint112,uint112,uint32)" --rpc-url "$RPC_URL"

Batch Reads with Multicall3

When reading multiple values across contracts, batch them into a single RPC call using Multicall3. This is deployed at a deterministic address on 250+ chains.

Address: 0xcA11bde05977b3631167028862bE2a173976CA11

Use aggregate3 to batch multiple cast call reads:

MULTICALL3="0xcA11bde05977b3631167028862bE2a173976CA11"

# Encode each sub-call
CALL1=$(cast calldata "balanceOf(address)" "$ADDR")
CALL2=$(cast calldata "totalSupply()")
CALL3=$(cast calldata "decimals()")

# Batch into a single RPC call via aggregate3
# Each tuple is (target, allowFailure, callData)
cast call "$MULTICALL3" \
  "aggregate3((address,bool,bytes)[])(((bool,bytes)[]))" \
  "[($TOKEN1,false,$CALL1),($TOKEN2,false,$CALL2),($TOKEN2,false,$CALL3)]" \
  --rpc-url "$RPC_URL"

When to use: Prefer Multicall3 whenever you need 2+ read calls on the same chain. It reduces RPC round-trips and guarantees all results come from the same block.

Caveat: msg.sender in downstream calls becomes the Multicall3 contract address, not the caller. Only use for reads or calls where msg.sender doesn't matter.

Build Raw Transactions

Use cast mktx to create a signed raw transaction without broadcasting it.

cast mktx "$CONTRACT" "transfer(address,uint256)" "$TO" "$AMOUNT" \
  --rpc-url "$RPC_URL" \
  --private-key "$ETH_PRIVATE_KEY"

Inspect Transactions

# View transaction details
cast tx "$TX_HASH" --rpc-url "$RPC_URL"

# View transaction receipt
cast receipt "$TX_HASH" --rpc-url "$RPC_URL"

# Get specific receipt fields
cast receipt "$TX_HASH" status --rpc-url "$RPC_URL"
cast receipt "$TX_HASH" gasUsed --rpc-url "$RPC_URL"

ABI Utilities

Encode Calldata

# Encode a function call
cast calldata "transfer(address,uint256)" "$TO" "$AMOUNT"

# ABI-encode arguments (without function selector)
cast abi-encode "transfer(address,uint256)" "$TO" "$AMOUNT"

Decode Calldata

# Decode calldata with a known signature
cast decode-calldata "transfer(address,uint256)" "$CALLDATA"

# Decode ABI-encoded data (without selector)
cast abi-decode "balanceOf(address)(uint256)" "$DATA"

Function Signatures

# Get the 4-byte selector for a function
cast sig "transfer(address,uint256)"

# Get the event topic hash
cast sig-event "Transfer(address,address,uint256)"

Wallet & ENS

Wallet Operations

# Generate a new wallet
cast wallet new

# Get address from private key
cast wallet address --private-key "$ETH_PRIVATE_KEY"

# List keystore accounts
cast wallet list

# Sign a message
cast wallet sign "Hello, world!" --private-key "$ETH_PRIVATE_KEY"

ENS Resolution

# Resolve ENS name to address
cast resolve-name "vitalik.eth" --rpc-url "$RPC_URL"

# Reverse lookup: address to ENS name
cast lookup-address "$ADDR" --rpc-url "$RPC_URL"

Balance Queries

# Get ETH balance
cast balance "$ADDR" --rpc-url "$RPC_URL"

# Get balance in ether (human-readable)
cast balance "$ADDR" --ether --rpc-url "$RPC_URL"

Chain Resolution

When the user specifies a chain by name, resolve the chain ID using these steps:

1. Check $evm-chains first — it is the authoritative Sablier-SDK-backed dataset for chain names, IDs, default public RPCs, native currency symbols, and RouteMesh support
2. If $evm-chains is unavailable, tell the user to install this collection with npx skills add PaulRBerg/agent-skills, then use references/chains.md as a limited fallback for common networks
3. If the chain is still not listed, web search for the correct chain ID on chainlist.org
4. Construct the RPC URL using the resolved chain ID and RouteMesh pattern when supported; otherwise use the chain's default public RPC

Quick Reference

Additional Resources

• $evm-chains — Preferred source for Sablier SDK EVM chain data and RouteMesh support
• Chain Reference — Limited fallback list of common chains for RouteMesh RPC URL construction
• Foundry Book: https://book.getfoundry.sh/reference/cast/

Converted and distributed by TomeVault — claim your Tome and manage your conversions.