Dma Attack Techniques

DMA Attack Techniques

Overview

This skill covers Direct Memory Access research from the awesome-game-security collection, focusing on FPGA-based PCIe attacks, pcileech usage, physical-memory access workflows, and the defensive limits of software anti-cheat once a hostile device can read memory below the OS.

README Coverage

• Cheat > DMA
• Anti Cheat > Detection:DMA
• Anti Cheat > Detection: Hacked Hypervisor
• Anti Cheat > Detection:Virtual Environments
• Anti Cheat > Detection:HWID
• Windows Security Features

DMA Fundamentals

What is DMA Attack?

DMA attacks exploit the ability of PCIe devices to directly access
system memory without CPU involvement. An attacker can:
- Read arbitrary physical memory
- Write to physical memory
- Bypass software-based protections
- Remain invisible to OS-level detection

Hardware Requirements

- FPGA development board (Xilinx/Altera)
- PCIe interface capability
- Sufficient logic resources
- Development environment

Defensive Context

Why DMA Matters for Anti-Cheat

- No hostile process needs to exist on the game PC
- No suspicious driver or injected module is required
- Reads can occur from a second machine over PCIe-attached hardware
- Traditional kernel callbacks and handle protection do not see the access

Key Defensive Constraints

- IOMMU / VT-d policy determines whether DMA can access arbitrary memory
- Device impersonation can blur the line between legitimate hardware and FPGA firmware
- Secure Boot and TPM help with platform trust, but do not eliminate physical DMA risk
- Enumeration-based detection is useful but not sufficient against good firmware mimicry

pcileech Framework

Overview

pcileech is the primary framework for DMA-based memory access:

• Open-source memory forensics tool
• Supports multiple FPGA boards
• Extensive plugin ecosystem
• Active development community

Supported Hardware

- Screamer PCIe (Xilinx Artix-7)
- PCIe Squirrel
- AC701 (Xilinx Artix-7)
- SP605 (Xilinx Spartan-6)
- Custom FPGA boards

Basic Usage

# Memory dump
pcileech dump -out memory.raw -min 0 -max 0x200000000

# Process listing
pcileech pslist

# Read specific address
pcileech read -a 0x12345000 -l 0x1000

# Write to address
pcileech write -a 0x12345000 -v 0x41414141

FPGA Firmware

Development Tools

- Vivado (Xilinx)
- Quartus (Intel/Altera)
- Open-source toolchains

Firmware Features

- TLP packet generation
- Configuration space emulation
- MSI/MSI-X interrupt handling
- DMA read/write implementation

Anti-Detection Features

- Device ID spoofing
- Vendor ID masquerading
- Serial number randomization
- Capability structure emulation

Device Emulation

Common Emulation Targets

- Network adapters (Intel I210/I226)
- Storage controllers
- USB controllers
- Sound cards

Emulation Requirements

1. Correct PCI configuration space
2. Proper capability structures
3. BAR (Base Address Register) setup
4. Interrupt handling

Example: Network Adapter Emulation

- Emulate Intel I210 NIC
- Proper device/vendor ID
- PHY register emulation
- Minimal functionality for detection evasion

Memory Access Techniques

Physical Memory Reading

// Typical pcileech API usage
HANDLE hDevice;
BYTE buffer[0x1000];

// Read physical memory
pcileech_read_phys(hDevice, physAddr, buffer, sizeof(buffer));

Virtual Address Translation

// Walk page tables to translate VA to PA
PHYSICAL_ADDRESS TranslateVA(UINT64 cr3, UINT64 virtualAddr) {
    // PML4 -> PDPT -> PD -> PT -> Physical
    UINT64 pml4e = ReadPhys(cr3 + PML4_INDEX(virtualAddr) * 8);
    UINT64 pdpte = ReadPhys(PFN(pml4e) + PDPT_INDEX(virtualAddr) * 8);
    UINT64 pde = ReadPhys(PFN(pdpte) + PD_INDEX(virtualAddr) * 8);
    UINT64 pte = ReadPhys(PFN(pde) + PT_INDEX(virtualAddr) * 8);
    return PFN(pte) + PAGE_OFFSET(virtualAddr);
}

DTB (Directory Table Base) Finding

- Scan physical memory for valid CR3 values
- Look for kernel structures
- Use signature scanning
- Validate page table entries

Integration with Tools

Cheat Engine DMA Plugin

- CE server for DMA access
- Process memory reading via DMA
- Remote debugging capability

ReClass DMA

- Structure reconstruction
- Live memory viewing
- Pointer scanning

Custom Implementations

- DMA libraries (DMALib)
- Minimal VM libraries
- Game-specific cheats

Anti-Cheat Bypass

Why DMA Bypasses Anti-Cheat

1. No process attachment
2. No suspicious API calls
3. No kernel driver needed
4. No code injection
5. Operates below OS level

Limitations

- Read-only for some implementations
- Timing-based detection possible
- Hardware fingerprinting
- Memory encryption (on newer systems)

Detection Methods

- PCIe device enumeration
- IOMMU/VT-d monitoring
- DMA buffer analysis
- Performance counter anomalies
- Device identity consistency checks
- Platform attestation and boot-state validation

Advanced Techniques

Wireless DMA

- pcileech-wifi: Wireless card emulation
- Remote memory access
- Extended range operation

SMM (System Management Mode)

- Ring -2 execution
- Highest privilege level
- Extremely stealthy
- Complex implementation

VMD Controller Emulation

- Virtual Management Device
- Hide behind Intel VMD
- Complex detection evasion

Firmware Development Guide

Project Structure

/firmware
├── src/
│   ├── pcie_core.v       # PCIe core
│   ├── tlp_handler.v     # TLP processing
│   ├── dma_engine.v      # DMA implementation
│   └── config_space.v    # Config emulation
├── constraints/
│   └── board.xdc         # Pin constraints
└── scripts/
    └── build.tcl         # Build script

Key Components

// TLP packet handling
module tlp_handler (
    input wire clk,
    input wire [127:0] rx_data,
    output reg [127:0] tx_data,
    // DMA interface
    output reg [63:0] dma_addr,
    output reg [31:0] dma_data,
    output reg dma_read,
    output reg dma_write
);

Security Considerations

Ethical Use

- Security research only
- Authorized testing environments
- Responsible disclosure
- Legal compliance

Risk Awareness

- Physical hardware access required
- Potential system instability
- Detection by advanced anti-cheat
- Legal implications

Resource Organization

The README contains:

• pcileech and derivatives
• FPGA firmware projects
• DMA libraries
• Integration tools
• Device emulation firmware
• Anti-detection implementations

Data Source

Important: This skill provides conceptual guidance and overview information. For detailed information use the following sources:

1. Project Overview & Resource Index

Fetch the main README for the full curated list of repositories, tools, and descriptions:

https://raw.githubusercontent.com/gmh5225/awesome-game-security/refs/heads/main/README.md

The main README contains thousands of curated links organized by category. When users ask for specific tools, projects, or implementations, retrieve and reference the appropriate sections from this source.

2. Repository Code Details (Archive)

For detailed repository information (file structure, source code, implementation details), the project maintains a local archive. If a repository has been archived, always prefer fetching from the archive over cloning or browsing GitHub directly.

Archive URL format:

https://raw.githubusercontent.com/gmh5225/awesome-game-security/refs/heads/main/archive/{owner}/{repo}.txt

Examples:

https://raw.githubusercontent.com/gmh5225/awesome-game-security/refs/heads/main/archive/ufrisk/pcileech.txt
https://raw.githubusercontent.com/gmh5225/awesome-game-security/refs/heads/main/archive/000-aki-000/GameDebugMenu.txt

How to use:

1. Identify the GitHub repository the user is asking about (owner and repo name from the URL).
2. Construct the archive URL: replace {owner} with the GitHub username/org and {repo} with the repository name (no .git suffix).
3. Fetch the archive file — it contains a full code snapshot with file trees and source code generated by code2prompt.
4. If the fetch returns a 404, the repository has not been archived yet; fall back to the README or direct GitHub browsing.

3. Repository Descriptions

For a concise English summary of what a repository does, the project maintains auto-generated description files.

Description URL format:

https://raw.githubusercontent.com/gmh5225/awesome-game-security/refs/heads/main/description/{owner}/{repo}/description_en.txt

Examples:

https://raw.githubusercontent.com/gmh5225/awesome-game-security/refs/heads/main/description/00christian00/UnityDecompiled/description_en.txt
https://raw.githubusercontent.com/gmh5225/awesome-game-security/refs/heads/main/description/ufrisk/pcileech/description_en.txt

How to use:

1. Identify the GitHub repository the user is asking about (owner and repo name from the URL).
2. Construct the description URL: replace {owner} with the GitHub username/org and {repo} with the repository name.
3. Fetch the description file — it contains a short, human-readable summary of the repository's purpose and contents.
4. If the fetch returns a 404, the description has not been generated yet; fall back to the README entry or the archive.

Priority order when answering questions about a specific repository:

1. Description (quick summary) — fetch first for concise context
2. Archive (full code snapshot) — fetch when deeper implementation details are needed
3. README entry — fallback when neither description nor archive is available

Converted and distributed by TomeVault — claim your Tome and manage your conversions.