Encapp

Encapp - Android Video Codec Testing Tool

Encapp is a tool for testing and characterizing video encoders and decoders on Android devices. It measures encoding/decoding performance and calculates video quality metrics (VMAF, PSNR, SSIM).

Repository: /home/chemag/proj/encapp

Quick Reference

Installation

# Install on device
./scripts/encapp.py install --serial <SERIAL>

# Grant permissions (Android 11+)
adb -s <SERIAL> shell appops set --uid com.facebook.encapp MANAGE_EXTERNAL_STORAGE allow

List Codecs

./scripts/encapp.py list --serial <SERIAL>
./scripts/encapp.py list --serial <SERIAL> -enc  # encoders only
./scripts/encapp.py list --serial <SERIAL> -hw   # hardware only

Run Tests

./scripts/encapp.py run <config.pbtxt> --serial <SERIAL> -w /tmp/results

Known Devices and Hardware Codecs

Test Configuration Format (.pbtxt)

Tests use Protocol Buffer text format. Key sections:

test {
    input {
        filepath: "/path/to/video.mp4"  # or "camera" for camera input
        resolution: "1280x720"
        framerate: 30
        playout_frames: 600             # total frames (loops if > video length)
        realtime: true                  # feed at realtime speed (e.g., 30fps)
        device_decode: true             # for transcoding (decode on device)
        show: true                      # display on screen
    }
    common {
        id: "test_id"
        description: "Human readable description"
    }
    configure {
        codec: "c2.qti.hevc.encoder"
        bitrate: "5 Mbps"
        surface: true                   # GPU surface mode (required for transcode/camera)
        bitrate_mode: cbr               # cbr, vbr, cq
        i_frame_interval: 2             # keyframe interval in seconds
    }
}

Common Experiment Types

1. Transcode Encoded File to HEVC (Realtime)

Decodes input on device, re-encodes to HEVC at realtime speed.

Config: tests/exp1_transcode_realtime.pbtxt

./scripts/encapp.py run tests/exp1_transcode_realtime.pbtxt \
  -i /path/to/input.mp4 \
  -c c2.qti.hevc.encoder \
  --serial R5CXC2ZH3DR \
  -w /tmp/results

Key settings:

• device_decode: true - decode on device
• realtime: true - feed at framerate speed
• surface: true - use GPU surface for decode-to-encode

2. Encode Raw YUV/Y4M to HEVC (Realtime)

Encodes raw video at realtime speed.

Config: tests/exp2_raw_encode_realtime.pbtxt

./scripts/encapp.py run tests/exp2_raw_encode_realtime.pbtxt \
  -i /path/to/input.y4m \
  -e input.resolution 1280x720 \
  -c c2.qti.hevc.encoder \
  --serial R5CXC2ZH3DR \
  -w /tmp/results

Key settings:

• realtime: true - feed at framerate speed
• pix_fmt: yuv420p - pixel format for raw YUV (Y4M auto-detected)

3. Camera Capture and Encode

Captures from device camera and encodes.

Config: tests/exp3_camera_encode.pbtxt

./scripts/encapp.py run tests/exp3_camera_encode.pbtxt \
  -c c2.qti.hevc.encoder \
  --serial R5CXC2ZH3DR \
  -w /tmp/results

Key settings:

• filepath: "camera" - use camera as input
• surface: true - required for camera
• show: true - display preview on screen

Common CLI Options

Quality Analysis

# Calculate VMAF/PSNR/SSIM
./scripts/encapp_quality.py --media /path/to/source/videos result.json -o quality.csv

# With multiple results
./scripts/encapp_quality.py --media /videos /tmp/results/*.json -o quality.csv

Test Videos

Common test videos location: ~/work/video/power/batteryexp.2026/vid/

Looping Short Videos

Set playout_frames higher than video frame count to loop:

• 10-second video at 30fps = 300 frames
• For 20 seconds: playout_frames: 600 (loops twice)

Output Files

Each test produces:

• encapp_<UUID>.json - Test metadata, config, and performance metrics
• encapp_<UUID>.mp4 - Encoded video output

Batch Mode vs Realtime Mode

Example: Rate-Distortion Curve

./scripts/encapp.py run tests/exp1_transcode_realtime.pbtxt \
  -r 100k,500k,1M,2M,5M,10M \
  --quality \
  -c c2.qti.hevc.encoder \
  --serial R5CXC2ZH3DR \
  -w /tmp/rd_curve

Troubleshooting

# Check if encapp is installed
adb -s <SERIAL> shell pm list packages | grep encapp

# Kill stuck app
./scripts/encapp.py kill --serial <SERIAL>

# Clear device files
./scripts/encapp.py clear --serial <SERIAL>

# Check device logs
adb -s <SERIAL> logcat -s encapp

Converted and distributed by TomeVault — claim your Tome and manage your conversions.