Goodboy008 Labelize Labelize

ZPL Diff Auto-Fix Skill

Purpose

Automatically detect labels with high rendering diff percentages, isolate the problematic ZPL elements into standalone test files for focused debugging, and iteratively fix the rendering logic until the diff drops below a target threshold (default 1%).

Critical Rule — Fix Rendering Code, Never Tests

DO NOT modify diff tests, golden test infrastructure, reference images, tolerance thresholds (to hide regressions), or test comparison logic to make diffs pass. The goal is to improve rendering accuracy, not to weaken the test harness.

DO fix the root cause in rendering code and logic:

• Parsers: src/parsers/
• Elements: src/elements/
• Barcode encoders: src/barcodes/
• Renderer / drawing: src/drawers/
• Font handling: src/assets/

Threshold updates in docs/DIFF_THRESHOLDS.md are only allowed after a rendering fix genuinely lowers the diff percentage — set the new tolerance slightly above the new measured diff, never raise it to paper over a regression.

When to Use

• A label has a diff percentage higher than desired
• You want to systematically reduce rendering differences across all labels
• You need to extract standalone ZPL snippets to isolate a rendering bug
• After implementing a rendering change, you want to verify and fine-tune it

Prerequisites

Before starting, ensure:

1. The diff report is up to date: cargo test --test e2e_diff_report -- --nocapture
2. All current tests pass: cargo test
3. You have reference PNG images in testdata/ for the target label(s)

Procedure

Phase 1: Scan — Identify High-Diff Labels

1. Read the diff report from testdata/diffs/diff_report.txt

2. Read the tolerance thresholds from docs/DIFF_THRESHOLDS.md

3. Identify target labels — either a specific label from the user's request, or all labels with diff > 1%:

   • List labels sorted by diff percentage (highest first)
   • For each, note the current diff%, tolerance, and primary diff source

4. Pick the highest-impact label to fix first (highest diff% that is potentially fixable — skip MaxiCode/PDF417 unless specifically requested)

Phase 2: Analyze — Find Problematic Elements

5. Read the ZPL source from testdata/labels/<name>.zpl or testdata/unit/<name>.zpl

6. Parse the ZPL to identify all commands and elements:

   Use src/skill/snippet_extractor.rs → split_zpl_commands() to list all commands
   Use src/skill/snippet_extractor.rs → group_commands_into_spans() to group into element spans
   

7. Inspect the diff image at testdata/diffs/<name>_diff.png — red pixels show where rendering differs from Labelary

8. Correlate diff regions with elements using src/skill/element_analyzer.rs:

   • Parse the ZPL to get LabelInfo
   • Compute bounding boxes for each element via compute_element_bbox()
   • Load the diff image and count red pixels in each bbox via correlate_diff_regions()
   • Report which elements contribute most to the total diff

9. Rank elements by diff contribution — focus on the top 3-5 contributors

9b. Classify each element's diff as ContentDiff, PositionDiff, or Mixed using src/skill/diff_classifier.rs → classify_element_diffs():

```
// Full pipeline with classification:
Use element_analyzer::analyze_label_with_classification(label, diff_path, zpl, use_labelary)
```

The classifier renders each element in isolation, optionally fetches the Labelary reference
for the same snippet, and compares the two renders:

| Isolated snippet diff | Full-label bbox diff | Classification |
|----------------------|----------------------|----------------|
| Low (< 2%)           | High (> 2%)          | **PositionDiff** — element placed wrong |
| High (> 2%)          | Any                  | **ContentDiff** — element renders wrong |
| High (> 2%)          | High (> 2%)          | **Mixed** — both |
| Low (< 2%)           | Low (< 2%)           | No classification (no meaningful diff) |

For **PositionDiff** elements, the classifier also attempts to detect the offset vector (dx, dy):
- Shadow detection: two clusters of red pixels → direct offset measurement
- Centroid shift: centroid of diff pixels vs. expected element center

Phase 3: Extract — Create Standalone Snippets

10. Extract each high-diff element into a standalone ZPL file:

    Use src/skill/snippet_extractor.rs → extract_element()
    

    This creates testdata/unit/<label>_<index>.zpl with:

    • ^XA / ^XZ wrapper
    • Global state commands (^PW, ^CF, ^BY, ^CI, ^FW, ^PO, ^LR) preserved
    • The specific element's command span (^FO/^FT through ^FS)

11. Render each snippet to verify it renders correctly in isolation:

    cargo run -- convert testdata/unit/<label>_<index>.zpl
    

    Both unit tests (testdata/unit/) and carrier labels (testdata/labels/) use the full Labelary canvas (101.625×203.25 mm at 8 dpmm → 813×1626 px). Unit golden PNGs are Labelary references at 812×1624 px (Labelary rounds by 1 px due to float precision).

12. Get Labelary reference for each snippet — post the snippet ZPL to:

    POST http://api.labelary.com/v1/printers/8dpmm/labels/4.005x8.01/0/
    

    Save the reference as testdata/unit/<label>_<index>_ref.png. Note: Labelary renders at 812×1624 for our canvas size (1 px smaller than the local renderer's 813×1626 due to floating-point rounding of the inch dimensions). This causes a ~0.25% systematic diff; direct pixel comparison is done over the overlapping region.

13. Compare snippet renders — this isolates the rendering difference to a single element

Phase 4: Fix — Iterative Rendering Fixes

For each high-diff element, starting with the highest contributor:

14. Identify the element type, diff classification, and fix category:

    Use FixCategory::from_classification(element_type, classification) to select the fix strategy:

    Classification	Fix Strategy	Target Source Files
    ContentDiff + Text	FontMetrics	src/drawers/renderer.rs, src/elements/font.rs
    ContentDiff + Barcode128	BarcodeEncoding	src/barcodes/code128.rs, src/drawers/renderer.rs
    ContentDiff + BarcodeEan13	BarcodeEncoding	src/barcodes/ean13.rs
    ContentDiff + Barcode2of5	BarcodeEncoding	src/barcodes/interleaved2of5.rs
    ContentDiff + Barcode39	BarcodeEncoding	src/barcodes/code39.rs
    ContentDiff + BarcodePdf417	BarcodeEncoding	src/barcodes/pdf417.rs
    ContentDiff + BarcodeAztec	BarcodeEncoding	src/barcodes/aztec.rs
    ContentDiff + BarcodeDatamatrix	BarcodeEncoding	src/barcodes/datamatrix.rs
    ContentDiff + BarcodeQr	BarcodeEncoding	src/barcodes/qrcode.rs
    ContentDiff + Maxicode	BarcodeEncoding	src/barcodes/maxicode.rs
    ContentDiff + GraphicBox/Circle/Line/Field	GraphicRendering	src/drawers/renderer.rs
    PositionDiff (any element)	PositionOffset	src/parsers/zpl_parser.rs, src/elements/field_alignment.rs, src/elements/drawer_options.rs
    Mixed (any element)	PositionOffset first, then ContentDiff fix	Both sets above

    For PositionDiff elements, use the detected offset vector (dx, dy) from PositionOffsetInfo to guide the fix — look for coordinate calculation that differs by that many pixels.

15. Fetch the official Zebra documentation for the suspect ZPL command using the zpl-reference skill:

    https://docs.zebra.com/us/en/printers/software/zpl-pg/c-zpl-zpl-commands/r-zpl-<slug>.html
    

16. Compare spec vs implementation using the fix-zpl-render skill's Phase 3 comparison table

17. Apply the fix to the relevant source file

18. Verify the fix:

    # Quick check — does it compile?
    cargo build
    
    # Render the snippet
    cargo run -- convert testdata/unit/<label>_<index>.zpl
    
    # Run the specific golden test
    cargo test --test e2e_golden -- <label_name> --nocapture
    
    # Check for regressions on ALL labels
    cargo test --test e2e_golden
    

19. Measure improvement:

    cargo test --test e2e_diff_report -- --nocapture
    

    Compare the new diff% against the previous value.

20. If diff improved without regressions: Keep the change and proceed to the next element.

21. If diff regressed on other labels: Revert the change and try a different approach.

22. Repeat from step 14 for the next highest-contributing element.

Phase 5: Finalize — Update Thresholds and Report

23. Update diff thresholds in docs/DIFF_THRESHOLDS.md:

    • Set new diff% values for improved labels
    • Set new tolerance ceilings slightly above the new diff%

24. Regenerate diff images:

    cargo test --test e2e_diff_report -- --nocapture
    

25. Run full test suite:

    cargo test
    

26. Commit all changes including:

    • Source code fixes
    • Updated docs/DIFF_THRESHOLDS.md
    • Updated diff images in testdata/diffs/
    • New snippet files in testdata/unit/ (if useful for ongoing debugging)

Auto-Fix Loop Strategy

When running in fully automated mode ("fix all labels above 1%"):

1. Generate diff report
2. Sort labels by diff% descending
3. For each label above 1%:
   a. Analyze element contributions
   b. For each element (highest contribution first):
      i.   Extract standalone snippet
      ii.  Identify fix category
      iii. Fetch Zebra spec for the command
      iv.  Compare spec vs implementation
      v.   Apply fix
      vi.  Build & test
      vii. If regression: revert, try next element
      viii.If improved: keep, re-measure
   c. After all elements tried:
      - If diff ≤ 1%: SUCCESS, move to next label
      - If diff > 1% but improved: PARTIAL, record improvement
      - If no improvement possible: SKIP (e.g., font metrics, library limitations)
4. Generate final report

Known Limitations

These labels cannot reach <1% diff due to fundamental limitations:

Utility Code Reference

The skill uses Rust utilities in src/skill/:

• diff_scanner.rs — Parse diff report, find high-diff labels, suggest closest label names
• element_analyzer.rs — Compute element bounding boxes, correlate diff pixels with elements
• snippet_extractor.rs — Split ZPL commands, group into spans, extract standalone snippets
• models.rs — Data structures: DiffReport, ElementBBox, ZplSnippet, etc.
• error.rs — Error types: ScanError, AnalyzeError, ExtractError

Phase 6: Commit — Generate Summary

27. Generate a commit message summarizing the changes:

    • List labels improved with before/after diff percentages
    • Summarize which rendering modules were modified
    • Note any threshold updates
    • Format: fix(render): reduce diff for <labels> — <brief description>

    Example:

    fix(render): reduce diff for amazon, dhl — fix ^FO baseline offset and Code128 quiet zone
    
    Labels improved:
    - amazon: 4.2% → 0.8%
    - dhl: 3.1% → 0.6%
    
    Changes:
    - src/parsers/zpl_parser.rs: correct ^FO y-offset calculation for rotated fields
    - src/barcodes/code128.rs: remove extra quiet zone module on right side
    - docs/DIFF_THRESHOLDS.md: update tolerances for amazon (1.0%), dhl (0.8%)
    

References

• Fix ZPL Render Skill — Detailed diagnostic procedures
• ZPL Reference Skill — Official Zebra documentation lookup
• Diff Thresholds — Per-label tolerance configuration
• Rendering Fixes History — Previously applied fixes

Source: GOODBOY008/labelize — distributed by TomeVault.