Impertio Studio Rust Claude Skill Package Rust Impl Channels

rust-impl-channels

A channel is a typed queue with a sender half and a receiver half: producers push values into the sender, consumers pull them from the receiver, and the queue handles synchronization. The right channel depends on three axes: sync vs async, how many producers and consumers, and how many values flow through it over time. Pick the wrong one and the program either blocks the executor, runs out of memory, or silently drops messages.

Cross-references: [[rust-impl-async-tokio]] (the runtime that hosts async channels and task spawning), [[rust-impl-concurrency]] (Arc / Mutex / atomics for in-place shared state without a channel), [[rust-core-stdlib-overview]] (std::sync::mpsc lives in the stdlib sync module), [[rust-errors-async]] (.await discipline, what a SendError means in an async context).

When to use this skill

• User picks between std::sync::mpsc and tokio::sync::mpsc in async code.
• User asks "why does my Tokio task hang" when blocking on a std::sync::mpsc::Receiver::recv().
• User has one task that needs to send a single value to another task and is reaching for mpsc.
• User wants to fan one event out to many subscribers.
• User wants to share the "latest configuration" or "latest state" with many watchers, not a stream.
• User asks "bounded or unbounded channel".
• User asks "what is backpressure" or "how do I apply backpressure".
• User asks "what does SendError mean" or "the receiver is dropped".
• User asks "do I need crossbeam-channel or flume instead of stdlib / tokio".

Decision tree: which channel

Need to pass values from producer(s) to consumer(s)?
|
+-- Single value, one-shot, producer -> consumer?
|     -> tokio::sync::oneshot::channel()   (async)
|     -> std::sync::mpsc::sync_channel(0)  (sync, last-resort: NOT idiomatic for one-shot)
|
+-- Stream of values, ONE consumer?
|     |
|     +-- Sync (threads only, no .await on receiver)?
|     |     -> std::sync::mpsc::channel()       (unbounded)
|     |     -> std::sync::mpsc::sync_channel(n) (bounded, n>=0)
|     |     -> crossbeam_channel::bounded(n) / unbounded()   (lock-free, faster, has select!)
|     |
|     +-- Async (consumer awaits)?
|           -> tokio::sync::mpsc::channel(buffer)   (bounded, applies backpressure)
|           -> tokio::sync::mpsc::unbounded_channel() (only when producer rate is bounded elsewhere)
|           -> flume::bounded(n) / unbounded()      (works in both sync and async)
|
+-- Stream of values, MANY consumers?
|     |
|     +-- Every consumer must see EVERY message?
|     |     -> tokio::sync::broadcast::channel(capacity)
|     |        (lagging consumers receive RecvError::Lagged and must catch up)
|     |
|     +-- Every consumer wants only the LATEST value, older values may be skipped?
|           -> tokio::sync::watch::channel(initial)
|
+-- Many producers, single consumer is implicit in mpsc.
+-- Many producers, many consumers, sync, lock-free: crossbeam_channel (mpmc when both ends cloned).

ALWAYS pick oneshot for a one-shot reply (request / response pattern). NEVER use mpsc::channel(1) as a substitute for oneshot: an mpsc receiver can drain repeatedly and the type does not encode "exactly one value".

ALWAYS pick broadcast when every subscriber must see every message and missed messages are acceptable failure. ALWAYS pick watch when subscribers care only about the most recent value.

std::sync::mpsc: synchronous, blocking

std::sync::mpsc (std-mpsc) is the stdlib multi-producer, single-consumer channel. It blocks the calling thread, so it MUST NOT be used inside an async fn on a Tokio task: a blocking recv() parks the thread and stalls every other task on that worker.

use std::sync::mpsc;
use std::thread;

fn main() {
    // Unbounded.
    let (tx, rx) = mpsc::channel::<u32>();

    // Multiple producers via clone.
    for i in 0..4 {
        let tx = tx.clone();
        thread::spawn(move || tx.send(i).unwrap());
    }
    drop(tx); // close the original; recv loop exits when ALL senders are dropped.

    while let Ok(v) = rx.recv() {
        println!("{v}");
    }
}

Bounded variant via sync_channel(n): capacity n slots, send() blocks the thread when full.

let (tx, rx) = mpsc::sync_channel::<u32>(4); // bounded, 4 slots
tx.send(1).unwrap();    // blocks the THREAD if full
tx.try_send(2).ok();    // non-blocking, returns Err(TrySendError::Full(v)) if full
let v = rx.recv().unwrap();

ALWAYS drop the original Sender after cloning copies to producer threads, otherwise the loop on the receiver side never sees RecvError. NEVER call rx.recv() inside an async fn. Use tokio::sync::mpsc instead, or wrap the blocking call in tokio::task::spawn_blocking.

tokio::sync::mpsc: async, awaitable

tokio::sync::mpsc (tokio-mpsc) provides bounded and unbounded variants whose send and recv are async. send().await parks the task, not the thread, so other tasks keep running.

use tokio::sync::mpsc;

#[tokio::main]
async fn main() {
    let (tx, mut rx) = mpsc::channel::<u32>(32); // bounded, capacity 32

    // Multiple producers via clone.
    for i in 0..4 {
        let tx = tx.clone();
        tokio::spawn(async move {
            tx.send(i).await.unwrap();
        });
    }
    drop(tx);

    while let Some(v) = rx.recv().await {
        println!("{v}");
    }
}

Bounded is the default choice: it applies backpressure. If consumers fall behind, producers slow down at the send().await point.

let (tx, mut rx) = mpsc::channel::<Vec<u8>>(16);

// Producer slows down naturally when the queue is full.
for chunk in input_stream {
    tx.send(chunk).await?; // waits when 16 chunks are queued
}

unbounded_channel() exists (tokio-mpsc-unbounded) but is dangerous: a faster producer + slower consumer = unbounded memory growth.

ALWAYS use bounded mpsc::channel(n) unless producer throughput is provably bounded upstream (e.g. one item per HTTP request). NEVER use unbounded_channel to "fix" a backpressure-induced slowdown: removing backpressure trades a CPU/latency problem for an OOM crash.

ALWAYS prefer Sender::reserve() when you need to do work before sending (build the message, acquire other resources): it reserves the slot atomically and avoids holding partial state during an .await.

tokio::sync::oneshot: one-shot single value

tokio::sync::oneshot (tokio-oneshot) is the request / response primitive: a Sender may send exactly one value, the Receiver is itself a Future that resolves with that value or with RecvError if the sender is dropped.

use tokio::sync::oneshot;

#[tokio::main]
async fn main() {
    let (resp_tx, resp_rx) = oneshot::channel::<u32>();

    tokio::spawn(async move {
        // Some work...
        let _ = resp_tx.send(42); // by value, consumes the sender
    });

    match resp_rx.await {
        Ok(v)  => println!("got {v}"),
        Err(_) => eprintln!("sender dropped without sending"),
    }
}

The canonical actor-style pattern is "mpsc + oneshot": commands flow through an mpsc::channel, each command carries a oneshot::Sender for its reply.

struct Request {
    payload: String,
    resp:    oneshot::Sender<u32>,
}

let (req_tx, mut req_rx) = mpsc::channel::<Request>(32);

tokio::spawn(async move {
    while let Some(req) = req_rx.recv().await {
        let answer = req.payload.len() as u32;
        let _ = req.resp.send(answer); // ignore error: caller may have given up
    }
});

let (resp_tx, resp_rx) = oneshot::channel();
req_tx.send(Request { payload: "hello".into(), resp: resp_tx }).await?;
let len = resp_rx.await?;

ALWAYS use oneshot for request / response. NEVER use mpsc::channel(1): an mpsc::Receiver does not encode "exactly one", and a duplicate send would queue or block instead of erroring.

ALWAYS ignore the Err from Sender::send if losing the reply is acceptable (caller may have already timed out). NEVER .unwrap() it: receiver drop is a normal life-cycle event.

tokio::sync::broadcast: fan-out, every subscriber sees every message

tokio::sync::broadcast (tokio-broadcast) is multi-producer, multi-consumer; every receiver gets every value the sender publishes, until the receiver lags too far behind. Capacity is the ring-buffer size: when a receiver lags more than capacity messages, its next recv() returns RecvError::Lagged(skipped) and then resumes at the oldest still-available message.

use tokio::sync::broadcast;

#[tokio::main]
async fn main() {
    let (tx, mut rx1) = broadcast::channel::<u32>(16);
    let mut rx2 = tx.subscribe();

    tokio::spawn(async move {
        loop {
            match rx2.recv().await {
                Ok(v) => println!("rx2 got {v}"),
                Err(broadcast::error::RecvError::Lagged(n)) => {
                    eprintln!("rx2 lagged, missed {n}");
                    // continue, recv() will return the next available message
                }
                Err(broadcast::error::RecvError::Closed) => break,
            }
        }
    });

    for i in 0..1000 { let _ = tx.send(i); }
}

ALWAYS handle RecvError::Lagged explicitly: it is a recoverable signal that the consumer fell behind and lost messages, not a fatal error. NEVER .unwrap() broadcast::recv() results.

ALWAYS choose a capacity matching the lag tolerance: a higher value preserves more history at the cost of memory; a low value forces faster consumers.

Sender::send is synchronous (no .await), unlike mpsc::Sender::send. The sender never blocks: when the ring is full the oldest message is dropped and lagging receivers get Lagged. This is the trade for "every consumer eventually catches up or sees a gap".

tokio::sync::watch: latest-value, overwriting

tokio::sync::watch (tokio-watch) is multi-producer, multi-consumer with only one value at a time. send replaces the stored value. Consumers borrow() the current value or await changed() to be woken on the next update. Intermediate updates are coalesced: a fast producer + slow consumer sees only the latest value.

use tokio::sync::watch;

#[tokio::main]
async fn main() {
    let (tx, mut rx) = watch::channel("starting".to_string());

    tokio::spawn(async move {
        loop {
            if rx.changed().await.is_err() { break; } // sender dropped
            let v = rx.borrow().clone();
            println!("config now: {v}");
        }
    });

    tx.send("running".into()).unwrap();
    tx.send("stopping".into()).unwrap();
}

ALWAYS pick watch for "current configuration", "current health status", "latest sensor reading". NEVER use broadcast for these: subscribers join, miss values, and you do not actually care about every intermediate value.

NEVER hold a borrow() across .await: it is a read-lock guard and blocks updates. Clone the value out, then drop the guard, then await.

crossbeam-channel and flume: alternatives

crossbeam-channel (crossbeam-channel) is a lock-free synchronous mpmc channel. It is faster than std::sync::mpsc and supports a native select! macro for waiting on multiple channels. It is not an async channel: receivers block the thread.

use crossbeam_channel::{bounded, select};

let (tx1, rx1) = bounded::<u32>(16);
let (tx2, rx2) = bounded::<u32>(16);

select! {
    recv(rx1) -> msg => println!("from 1: {msg:?}"),
    recv(rx2) -> msg => println!("from 2: {msg:?}"),
    default(std::time::Duration::from_millis(100)) => println!("timeout"),
}

flume (flume) is an alternative channel crate that supports both sync and async receivers from the same channel, plus its own select! macro. Useful for code paths that mix threads and async tasks on the same queue.

ALWAYS choose tokio::sync::mpsc first in async code (matches the runtime, minimal dependencies). Choose crossbeam-channel when you need lock-free sync mpmc or a sync select!. Choose flume when the same channel must be read from threads and async tasks.

NEVER reach for these crates "for performance" without measuring: tokio::sync::mpsc is fast enough for the vast majority of workloads, and an extra crate buys complexity.

Backpressure: bounded vs unbounded

Backpressure is the property that "fast producers slow down when slow consumers cannot keep up". A bounded channel propagates backpressure through send().await (async) or blocking send() (sync, sync_channel). An unbounded channel does not propagate backpressure: fast producers queue forever and memory grows unbounded.

try_send vs send().await (or blocking send) is the next decision:

ALWAYS use send().await (or bounded sync send) by default: that is what backpressure means. ALWAYS use try_send only when "drop the value" is a valid policy (telemetry sampling, redraw frames).

SendError and channel-closed signals

A SendError always means "the receiver is gone" (last Receiver was dropped). It is a normal life-cycle event, not a bug:

• For mpsc: the consumer task panicked or exited cleanly.
• For oneshot: the requester gave up waiting (timed out, cancelled).
• For broadcast: all subscribers dropped.
• For watch: all watchers dropped.

ALWAYS treat SendError as "stop producing, shut down gracefully". NEVER panic on it: the consumer is allowed to leave. Common idioms: if tx.send(v).await.is_err() { break; } in a producer loop, or let _ = resp.send(v); for fire-and-forget replies.

Symmetrically, the receiver side detects "all producers are gone":

• mpsc::Receiver::recv() returns None.
• oneshot::Receiver resolves with Err(RecvError).
• broadcast::Receiver::recv() returns Err(RecvError::Closed).
• watch::Receiver::changed() returns Err(RecvError).

ALWAYS use the receiver side to drive shutdown loops: while let Some(msg) = rx.recv().await { ... } exits cleanly when every sender has dropped.

Quick reference table

Avoid these mistakes

(Full list with WHYs in references/anti-patterns.md.)

• Calling std::sync::mpsc::Receiver::recv() inside an async function: it blocks the OS thread, stalling the Tokio worker. Use tokio::sync::mpsc or wrap in spawn_blocking.
• Using tokio::sync::mpsc::unbounded_channel() because send().await "is in the way": removing backpressure trades a slowdown for unbounded memory growth and OOM.
• Reaching for mpsc::channel(1) to model "exactly one reply": semantics are wrong (the receiver can drain repeatedly) and a second send would queue silently. Use oneshot.
• Treating SendError as a bug and .unwrap()-ing it: the receiver dropping is a normal end-of-life signal. Match on it and shut the producer down.
• Forgetting to drop the original Sender after cloning, then waiting forever on Receiver::recv(): with one Sender still alive recv cannot return None.
• Holding a watch::Receiver::borrow() across .await: it is a read-lock that blocks updates, leading to apparent deadlock when the sender tries to publish.
• Ignoring broadcast::RecvError::Lagged: consumer silently loses messages with no diagnostic. Always match the variant explicitly.
• Using broadcast for "current configuration" and watch for "every event": semantics inverted. Broadcast is every event, watch is latest value.
• Calling .recv() in a busy loop { match rx.try_recv() { ... } } polling pattern in async code: burns CPU. Use .recv().await.
• Sharing the same channel for unrelated message kinds: a typed enum works but limits backpressure granularity. Prefer one channel per logical stream.

Reference links

• std::sync::mpsc: stdlib synchronous mpsc, both channel() and sync_channel(n).
• tokio::sync: index of all async sync primitives.
• tokio::sync::mpsc: bounded and unbounded async mpsc.
• tokio::sync::oneshot: single-value channel for request / response.
• tokio::sync::broadcast: fan-out with Lagged semantics.
• tokio::sync::watch: latest-value, coalescing.
• Tokio tutorial : channels: actor-style mpsc + oneshot pattern.
• crossbeam-channel: lock-free sync channel with select!.
• flume: sync + async hybrid channel with select!.

For deeper drill-downs see:

• references/methods.md: complete method signatures for every channel type plus a side-by-side send / recv comparison.
• references/examples.md: working code: actor with mpsc + oneshot, broadcast with Lagged handling, watch for config reload, bounded backpressure demo, crossbeam select!.
• references/anti-patterns.md: 10+ documented anti-patterns with WHY and FIX.

Source: Impertio-Studio/Rust-Claude-Skill-Package — distributed by TomeVault.