Implement Sprint

Implement Sprint

Automated sprint implementation with context discipline and binding quality gates. Runs all phases without stopping, presents results for approval.

Orchestrator Role

You are a router, not a judge. You launch agents, run automated gates, and relay results. You do NOT interpret technical findings or make quality decisions about code you haven't read.

Binding rules:

1. If a reviewer returns VERDICT: REVISIONS NEEDED, you MUST launch a fixer agent. You may NOT dismiss, reinterpret, or skip any finding.
2. If you disagree with a finding, include your disagreement alongside the finding in the final presentation. The user decides — you do not.
3. You never evaluate whether code is "intentional," "acceptable," or "a known pattern." Route findings; don't filter them.

Prerequisites

• Sprint spec exists at docs/sprints/current/spec.md
• Sprint state at docs/sprints/current/state.yaml
• Contracts are fully defined (no ambiguity)

Pre-Flight Checks

Run these checks before any implementation work. Do NOT skip or reorder them.

1. Git State

Run git status. If there are uncommitted changes:

• Show the user what files are modified/untracked
• Ask the user whether to proceed with those changes in place or stop
• NEVER stash, checkout, or reset the user's changes. Those changes may BE the sprint files. Destroying them destroys the sprint.

2. Spec Validation

After reading spec.md and state.yaml, verify the spec is current:

• The sprint name in spec.md should match state.yaml
• At least one phase should have status pending
• If the spec looks like a different/old sprint, STOP and tell the user rather than implementing the wrong thing

Context Budget Rules

These rules prevent context exhaustion. Follow them exactly.

Rule 1: Orchestrator Reads Minimally

You (the orchestrator) read ONLY these files:

Do NOT read source files, architecture docs, config models, or any .py file. The implementer agent reads what it needs. Your job is orchestration, not comprehension.

Rule 2: Subagent Prompts Are Brief

Pass to agents:

• Phase number and title (from spec)
• Sprint spec path: docs/sprints/current/spec.md
• One sentence summarizing the phase goal
• The quality/output rules block (standardized, see templates below)

Do NOT paste code, file contents, contracts, or implementation details into prompts. Exception: the fixer prompt includes the reviewer's response verbatim.

Rule 3: TaskOutput — Never Double-Read

When calling TaskOutput for a subagent:

• Use timeout: 600000 (10 minutes) on the FIRST call
• If it times out, call TaskOutput again with timeout: 600000
• NEVER call TaskOutput on a subagent that already returned a result — even partial

One TaskOutput call per subagent. Period.

Rule 4: No Accumulation Between Phases

After committing a phase, you have the git history as your record. Do NOT retain mental summaries of what each phase did. The commit messages and state.yaml track progress.

Exception: retain the review verdict (APPROVED or list of unresolved findings) for the final presentation.

Automation Model

/implement-sprint
       |
+------------------------------------------+
|  AUTOMATED (no human intervention)       |
|                                          |
|  For each phase:                         |
|    1. Implement (implementer agent)      |
|    2. Pre-commit                         |
|    3. Tests                              |
|    4. Review (reviewer agent)            |
|       ├─ APPROVED → step 6              |
|       └─ REVISIONS NEEDED               |
|          5. Fix cycle (max 3):           |
|             a. Fix (implementer agent)   |
|             b. Pre-commit + Tests        |
|             c. Re-review                 |
|          └─ 3 failures → STOP           |
|    6. Demo                               |
|    7. Analyze data (if applicable)       |
|    8. Commit                             |
|                                          |
|  After all phases:                       |
|    9. review-sprint                      |
|   10. Run all demos twice                |
|   11. Completion checks                  |
+------------------------------------------+
       |
+------------------------------------------+
|  PRESENT TO USER                         |
|                                          |
|  - Summary of what was built             |
|  - Test results + coverage               |
|  - Review findings + resolutions         |
|  - Demo output samples (both runs)       |
|  - Unresolved findings (if any)          |
+------------------------------------------+
       |
   User Decision
       |
+-------------+-------------+------------------+
|   ACCEPT    |    FIX      |     RESET        |
|             |             |                  |
| Keep        | Address     | git reset to     |
| commits     | issues,     | pre-sprint HEAD  |
|             | amend/fix   | Try again        |
+-------------+-------------+------------------+

Key principle: Commit after each phase for clean git history. Reset reverts all phase commits if needed.

Process Details

Phase Implementation (Automated)

For each phase in the sprint:

Step 1: Implement

Launch the implementer agent. Your prompt MUST follow this template exactly:

Implement Phase {N}: {Title} for the current sprint.

Sprint spec: docs/sprints/current/spec.md
Read the spec, focus on Phase {N}. Read source files as needed.

QUALITY RULES (mandatory):
- Decompose into module-level functions, not inner closures — helpers must be independently testable
- If two modules share logic, extract it into a shared module (DRY)
- Check every success criterion in the spec — missing deliverables (examples, configs) count as failures
- Use TYPE_CHECKING for type-only imports; keep runtime imports minimal
- Remove stale comments (sprint changelog comments, "# Future:", scaffolding markers)
- No code duplication — if you copy-paste and modify, extract a shared function instead
- Place tests in the module directory matching the code under test (e.g., tests/journeys/ for journey code). Never create sprint-named test files or a tests/sprints/ directory.

CODE NAVIGATION (mandatory — use LSP tools instead of Grep for code structure):
- find_definition: Jump to where a class/function is defined (not `Grep "def foo"` or `Grep "class Bar"`)
- find_references: Find all usages of a symbol (not `Grep "foo("` across directories)
- get_hover: Get type info/docs for a symbol without reading the whole file
- get_incoming_calls: Find what calls a function (not `Grep "function_name"`)
- find_workspace_symbols: Search for symbols by name across the codebase
- Reserve Grep for pattern searches (anti-patterns, TODOs, regex matching) — not for navigating code structure

OUTPUT RULES (mandatory):
- Final response MUST be under 2000 characters
- List files modified/created (paths only, no contents)
- Test result: pass count and fail count
- One-line summary per file change
- DECISIONS: List 1-3 key implementation decisions (where you placed code, which approach you chose, what you considered and rejected). One line each.
- Do NOT include code snippets, stack traces, or implementation details
- Do NOT re-read files you have already read
- If a demo fails after 3 attempts, report the error and stop

ITERATION LIMITS:
- Max 3 attempts to fix any single failing test
- Max 3 attempts to fix a demo script
- Never read the same file more than twice

Do NOT add anything else to the prompt. No file contents, no contracts, no code patterns.

Use run_in_background: true. Then call TaskOutput with timeout: 600000.

Step 2: Pre-commit

pre-commit run --all-files

If pre-commit fails: Fix issues yourself (these are usually formatting) and re-run. Do not launch a subagent for this.

Step 3: Tests

python -m pytest --cov=src/fabulexa --cov-fail-under=85
uv pip install -e .

If tests fail: Stop automation, report failure to user.

Step 4: Review

Launch the reviewer agent. Your prompt MUST follow this template:

Review Phase {N}: {Title} of the current sprint.

Sprint spec: docs/sprints/current/spec.md
Focus on Phase {N} only.

Check the changes for this phase:
  git diff HEAD

QUALITY CHECKS (in addition to standard review):
- Are helpers module-level functions (not closures/nested defs)?
- Any code duplication over 10 lines?
- Any success criteria from the spec not delivered?
- Any runtime imports that should be TYPE_CHECKING only?
- Any stale sprint comments left in modified files?
- Does the implementation stay within Phase {N} scope? Flag any code that belongs to a different phase.

CODE NAVIGATION: Use mcp__cclsp__find_definition and find_references to trace code paths. Do not Grep for "def foo" or "class Bar" — use LSP tools instead.

OUTPUT FORMAT (mandatory — follow exactly):

VERDICT: APPROVED

or

VERDICT: REVISIONS NEEDED
FINDINGS:
- [file:line] description of required change
- [file:line] description of required change

Final response MUST be under 1500 characters.
Use ONLY the verdict format above. No prose before the verdict line.

Use run_in_background: false (reviewer is fast).

Routing (mechanical — no interpretation):

You do NOT evaluate whether findings are valid. You read the verdict and route.

Step 5: Fix Cycle

When the reviewer returns VERDICT: REVISIONS NEEDED, launch the implementer agent:

Fix review findings for Phase {N}: {Title}.

Sprint spec: docs/sprints/current/spec.md
Read the spec for Phase {N} context, then fix the findings below.

REVIEWER FINDINGS (must be addressed):
{paste the reviewer's full response verbatim — do not summarize or filter}

RULES:
- Address every finding listed above
- If a finding is genuinely incorrect, state DISPUTED with a one-line reason — do NOT silently skip it
- Run tests after fixes to verify nothing breaks
- Do not make changes beyond what the findings require
- Use LSP tools (find_definition, find_references, get_incoming_calls) to navigate code — not Grep for definitions/references

OUTPUT RULES (mandatory):
- Final response MUST be under 1500 characters
- For each finding: FIXED or DISPUTED (with one-line reason)
- List files modified (paths only)
- Test result: pass count and fail count

Use run_in_background: true. Then call TaskOutput with timeout: 600000.

After the fixer completes:

1. Run pre-commit (Step 2)
2. Run tests (Step 3)
3. Re-launch reviewer (same prompt as Step 4)

Max 3 fix cycles per phase. After 3 cycles still returning REVISIONS NEEDED:

• STOP automation
• Do NOT commit the phase
• Collect the unresolved findings for the final presentation
• Report to user immediately

Step 6: Demo

python docs/sprints/current/demos/phase_N_*.py

Demo must run without errors and exit 0.

Step 7: Analyze Data (If Applicable)

If the demo produces simulation output, launch the data-analyst agent:

Analyze output from Phase {N} demo.

Demo script: docs/sprints/current/demos/phase_{N}_*.py
Run the standard validation workflow from your instructions.

OUTPUT RULES (mandatory):
- Final response MUST be under 1500 chars
- Use VALIDATION: PASS or VALIDATION: ISSUES FOUND format

Step 8: Commit Phase

Update state.yaml to show status.

git add -A
git commit -m "$(cat <<'EOF'
Sprint [Name] - Phase N: [Title]

- [What this phase implemented]
- Tests: PASS
- Pre-commit: PASS
- Review: APPROVED [or: APPROVED after N fix cycles]

Co-Authored-By: Claude <noreply@anthropic.com>
EOF
)"

Step 8b: Attach Sprint Notes

After the commit succeeds, attach a structured note to the commit. This provides cross-session context for reviewers and future implementers.

Build a JSON object from data you already have (implementer summary, reviewer verdict, fix cycle count). Then attach it:

git notes --ref refs/notes/agent/sprint add -m "$(cat <<'EOF'
{
  "sprint": "[Name]",
  "phase": N,
  "decisions": [
    "[from implementer DECISIONS output — 1-3 lines]"
  ],
  "review_cycles": N,
  "findings_fixed": ["[from fixer output, if any]"],
  "findings_disputed": ["[from fixer output, if any]"],
  "files_created": ["[from implementer output]"],
  "files_modified": ["[from implementer output]"]
}
EOF
)" HEAD

Schema rules:

• decisions: Key implementation choices from the implementer's DECISIONS output. Copy verbatim — do not summarize.
• review_cycles: Integer. 0 if reviewer approved first pass.
• findings_fixed / findings_disputed: Empty arrays [] if reviewer approved first pass.
• files_created / files_modified: From the implementer's file list.

If the git notes command fails (e.g., git notes not available), log a warning and continue. Notes are supplementary — never block the sprint on them.

Post-Implementation (Automated)

After all phases complete:

Step 9: Review Sprint

Run /review-sprint for comprehensive fresh-eyes audit.

Step 10: Run All Demos Twice

for demo in docs/sprints/current/demos/phase_*.py; do
    python "$demo"
done

for demo in docs/sprints/current/demos/phase_*.py; do
    python "$demo"
done

Both runs must produce consistent output.

Step 11: Completion Checks

pre-commit run --all-files
git status --porcelain | grep "^??"
grep -rn "# Future:" src/
grep -rn "pass$" src/

Present to User

Show:

1. Summary: What was built, files changed
2. Tests: Pass/fail count, coverage percentage
3. Review findings: For each phase, list all reviewer findings and their resolution (FIXED, DISPUTED, or UNRESOLVED). Include the reviewer's original text — do not paraphrase.
4. Demos: Sample output proving it works
5. Unresolved items: Any findings that survived 3 fix cycles, with full context

Do NOT filter, summarize, or editorialize review findings. The user sees what the reviewer found and what the fixer did about it.

User Decision

ACCEPT

Commits already made per-phase. Update state.yaml and archive sprint.

FIX

1. Fix the specific issues
2. Run pre-commit
3. Commit the fix
4. Re-run review-sprint
5. Present again

RESET

git log --oneline -10
git reset --hard <pre-sprint-commit>
git clean -fd

Context Budget Summary

Agent Summary

Failure Modes

Gate fails (pre-commit/tests): Report which gate, what error. User decides: fix or reset.

Fix cycle exhausted (3 cycles): STOP automation. Report the unresolved findings with full reviewer text. User decides: fix manually, accept the risk, or reset.

Demo crashes: Report stack trace. User decides: fix or reset.

Data analyst finds anomalies: Report findings. User decides: acceptable or not.

Tips

For clean runs:

• Ensure spec is unambiguous before starting
• Use a dedicated branch for risky sprints
• Keep sprints small (easier to reset)

If you keep resetting:

• The spec may be flawed (ambiguous, contradictory)
• Consider running /create-sprint again
• Or manually implement the tricky part first

If fix cycles keep failing:

• The reviewer and fixer may disagree on approach — this needs human judgment
• Read the findings yourself to break the tie

Source: leogodin217/leos_claude_starter — distributed by TomeVault.