tomevault-io Step 0 — Activate gate session
~/.claude/scripts/marker.sh activate memory-skill
While active, require-memory-skill.sh bypasses for this session (<60 min freshness; mtime refreshed on each pass). If the command fails (empty SESSION_ID), abort — capture-session-id.sh SessionStart hook did not run, and every gated memory write below will be blocked.
Step 1 — Decide where this rule belongs before writing
Before writing any file under memory/, check in order:
- Grep CLAUDE.md and AGENTS.md (project tree +
~/.claude/) for keywords from the rule. If covered → edit the source, don't write to memory. Restating a covered rule is pure load. (See §3 advisory vs deterministic, §5 anti-duplication heuristic.) - Does this rule fire only inside a specific named skill's workflow? If yes → that skill's
SKILL.md, not memory. Skill bodies load at the moment the rule applies; memory loads every session whether the session uses that workflow or not. - Confirm the content fits a genuine memory use: personal preference (user type), feedback calibration with the why — corrections and validated judgment calls (feedback type), past-incident context not captured in code or commit messages (project type), or pointer to an external system (reference type).
If step 1 or 2 produces a destination, write there and stop. This pre-write check is placed here — before the architecture overview — because the Step 0 procedural form is what runs reliably before the writer decides what to do. See §4 and §5 below for the full routing tables.
AI Instruction & Memory Files — Architecture
The facts below come from primary sources (URLs in co-located REFERENCES.md). When CLAUDE.md / AGENTS.md questions arise, start here; open REFERENCES.md only to verify a specific URL or quote.
1. Claude Code loads CLAUDE.md only — NOT AGENTS.md
Verbatim from Claude Code — How Claude remembers your project:
"Claude Code reads CLAUDE.md, not AGENTS.md. If your repository already uses AGENTS.md for other coding agents, create a CLAUDE.md that imports it so both tools read the same instructions without duplicating them."
Confirming signals:
- Zero entries for "AGENTS.md" in the claude-code changelog — the support was never added.
- Claude Code is explicitly absent from the agents.md supporting-tools list (Codex, Cursor, Gemini CLI, Windsurf, Amp, Aider, etc. are listed).
The Anthropic-documented single-source-of-truth pattern is:
@AGENTS.md
# Claude-specific content below this line
Put @AGENTS.md as the first line of CLAUDE.md. Claude Code imports the
referenced file's content; maintenance is single-source, no duplication.
@path imports resolve relative to the file containing the import, not
the current working directory. A @docs/x.md in .claude/CLAUDE.md
looks for .claude/docs/x.md.
Claude Code CLAUDE.md precedence (within the family)
Concatenated, not overridden:
- Managed policy (enterprise)
- Project
./CLAUDE.mdor./.claude/CLAUDE.md - User
~/.claude/CLAUDE.md(global) CLAUDE.local.md
Claude Code walks from the current working directory up to /,
concatenating every CLAUDE.md it finds along the way — ancestor
instructions are additive, not overridden. In monorepos this means
root-level CLAUDE.md, team-directory CLAUDE.md, and project-level
CLAUDE.md all load together.
For Lovable's UI knowledge fields (Project Knowledge, Workspace
Knowledge), the .lovable/*.md repo-mirror workflow, and review
criteria for .lovable/** changes, see the lovable-cloud-knowledge skill.
2. Length targets
Official threshold: under 200 lines per CLAUDE.md file (Claude Code — memory: "Longer files consume more context and reduce adherence"). The unit is lines — no Anthropic source attaches a word-count threshold. Within that cap, line count undercounts density (long-paragraph lines bury rules), and attention decays in the middle ("lost in the middle"). Apply the behavior test below per line; place critical rules near start or end. CLAUDE.md is advisory while hooks are deterministic (Claude Code Best Practices: hooks "guarantee the action happens") — prefer a hook or structural test when a rule can be encoded as one.
The behavior test
Every line should change Claude's behavior on at least one realistic input. If removing the line wouldn't change any behavior, cut it. Specific incident references, editorial meta-commentary, and narrative case studies almost always fail this test; rationale that arms Claude for an unenumerated edge case almost always passes.
Don't embed PR or ticket refs in always-loaded files
Precedent: PR #105 and See TICKET-123 rot the moment the next PR
lands and cost per-session context budget. Put them in commit messages,
PR descriptions, or plan files — state the rule, not the precedent.
3. When to duplicate vs. reference
Reference via @AGENTS.md import (Anthropic pattern): default for
Claude Code when both files exist. Zero maintenance, single source.
Duplicate (defense-in-depth) when:
- The content is genuinely critical and one delivery mechanism could fail silently.
- Different agents reach the file through different load paths and the rule needs to fire in all of them.
- Example: a security-critical rule appearing in AGENTS.md (advisory) AND enforced by a pre-commit hook (deterministic) — the hook catches what prose drift misses.
Do NOT duplicate when:
- An AGENTS.md-aware agent already reads it natively and Claude Code can import it via
@AGENTS.md— one canonical source covers both. - The content is enforced structurally (a test, a hook) — prose duplication adds maintenance without raising adherence above the deterministic enforcement.
- The rule is process discipline enforced by
/pre-merge, commit-review hooks, or other mechanical gates.
4. Quick decision flow when editing
| Question | Answer |
|---|---|
| Am I adding a new guardrail? | Put it in AGENTS.md (canonical, cross-agent). Claude Code gets it via @AGENTS.md import; other AGENTS.md-aware agents (Codex, Cursor, Aider, Gemini CLI, Windsurf, Amp, Lovable) read it natively. |
| The rule applies only when a specific skill is running (e.g., "write backticks literally when constructing a PR body via heredoc")? | Edit that skill's SKILL.md, not CLAUDE.md. CLAUDE.md is loaded every session — a context-specific rule there costs a global line of attention budget on every session that doesn't need it. The skill file is read at the exact moment the rule applies. |
| The repo has CLAUDE.md but no AGENTS.md — should I add AGENTS.md? | Only if a non-Claude AGENTS.md-aware agent (Lovable, Cursor, Codex, Aider, etc.) is also using the repo. Otherwise CLAUDE.md alone is fine. |
| CLAUDE.md is over 200 lines — what should I trim? | First: delete content that duplicates AGENTS.md (use @AGENTS.md import instead). Then: collapse narrative case studies into one-sentence principles. Leave only Claude-Code-specific project context. |
| A rule appears in two files — is that OK? | Only if (a) it's critical AND (b) the two files reach different agents / different load paths AND (c) one could silently fail. Otherwise use the import pattern. |
| Where should this rule live — CLAUDE.md or auto-memory? | Team rule → CLAUDE.md (or AGENTS.md). Personal preference / calibration → memory. If CLAUDE.md, AGENTS.md, or a hook already covers it → neither; delete the memory. See §5. |
5. Claude Code auto-memory (Claude-written, per-user)
Auto-memory at ~/.claude/projects/<project>/memory/ is adjacent to
CLAUDE.md but serves a different role. It's machine-local and per
working tree — never a place for team rules. From
Claude Code — memory:
| CLAUDE.md files | Auto memory | |
|---|---|---|
| Who writes it | You | Claude |
| What it contains | Instructions and rules | Learnings and patterns |
| Scope | Project, user, or org | Per working tree (machine-local) |
| Loaded into | Every session | Every session (first 200 lines or 25KB of MEMORY.md) |
| Use for | Coding standards, workflows, project architecture | Build commands, debugging insights, preferences Claude discovers |
"Use CLAUDE.md files when you want to guide Claude's behavior. Auto memory lets Claude learn from your corrections without manual effort."
MEMORY.md is an index, not a memory
"The first 200 lines of
MEMORY.md, or the first 25KB, whichever comes first, are loaded at the start of every conversation... Topic files likedebugging.mdorpatterns.mdare not loaded at startup. Claude reads them on demand..."
Index discipline:
- One line per entry, ≤150 characters:
- [title](file.md) — one-line hook - No frontmatter on
MEMORY.mditself — it's an index, not a memory - Substance lives in per-topic files; the index is pure routing
- Organize semantically, not chronologically
- Lines past 200 silently don't load — treat 200 as a hard ceiling
Where does a given rule belong?
| Candidate content | Goes in |
|---|---|
| Rule any contributor (or other agent) should follow | CLAUDE.md, or AGENTS.md via @AGENTS.md |
| Personal preference or workflow specific to this user | Auto-memory |
| Rule that fires only inside a specific skill's flow | That skill's SKILL.md (not CLAUDE.md, not auto-memory) |
| Past incident "why" not captured in code, tests, or commit msgs | Auto-memory (feedback or project type) |
| Pointer to external systems (Linear, Grafana, etc.) | Auto-memory (reference type) |
| Restatement of a rule already in CLAUDE.md / AGENTS.md | Nowhere — delete it (§3 advisory vs deterministic) |
| Rule already enforced by a hook or structural test | Nowhere — the hook enforces it; prose is load |
Anti-duplication heuristic
If CLAUDE.md / AGENTS.md already covers a rule, the matching memory is pure load: the rule fires every session through the instruction file, the index line consumes one of the ~200 loaded lines, and any recall reads a topic file that restates content already in context. Delete on contact.
Memory earns its keep when it captures what the repo doesn't: who the user is and how they prefer to collaborate, feedback calibration (corrections and validated judgment calls) with the why story, time-sensitive project context, and references to external systems.
Final step — Deactivate gate session
~/.claude/scripts/marker.sh deactivate memory-skill
Removes this session's bypass marker. If the skill errors before reaching this step, the gate will evict the orphan automatically once the session's process ends — the hook checks PID liveness on each gate hit.
Source: jcdendrite/claude-config — distributed by TomeVault.