Mamemame777 Axiuart Base Rtl Coding Standards

name: rtl-coding-standards description: SystemVerilog RTL coding standards for FPGA/ASIC design. Use when generating RTL modules, interfaces, state machines, or reviewing RTL code structure.

RTL Coding Standards

SystemVerilog coding standards for production RTL design in the AXIUART_RV32I project.

When to Use This Skill

• Generating new RTL modules, interfaces, or packages
• Creating state machines or combinational/sequential logic
• Reviewing or refactoring existing RTL code
• Resolving naming convention or structural questions
• Implementing design patterns (FSMs, FIFOs, counters)

Critical Rules (Never Violate)

1. Timescale Directive (MANDATORY)

Every RTL and interface file MUST begin with:

`timescale 1ns / 1ps

2. Variable Declaration Placement (MANDATORY)

All variable declarations MUST be at the beginning of module/block:

✅ Correct:

module Example (/*...*/);
    // All declarations first
    typedef enum logic [1:0] {IDLE, RUN, DONE} state_t;
    state_t state, state_next;
    logic [7:0] counter;
    logic valid;
    
    // Logic follows declarations
    always_comb begin
        // ...
    end
endmodule

❌ Wrong:

module Example (/*...*/);
    logic [7:0] counter;
    
    always_comb begin
        logic temp;  // ❌ Declaration inside block
        temp = counter + 1;
    end
endmodule

3. Reset Convention (MANDATORY)

Default: Synchronous, active-high reset

✅ Standard:

always_ff @(posedge clk) begin
    if (rst) begin
        counter <= '0;
    end else begin
        counter <= counter + 1;
    end
end

For active-low reset, invert explicitly:

module My_Module (input logic clk, input logic rst_n);
    logic rst;
    assign rst = ~rst_n;  // Explicit inversion
    
    always_ff @(posedge clk) begin
        if (rst) begin  // Use internal active-high
            // ...
        end
    end
endmodule

4. Always Block Types (MANDATORY)

• Use always_ff for sequential logic
• Use always_comb for combinational logic
• Never use always @* in new code

// Combinational logic
always_comb begin
    data_next = data;
    if (increment) data_next = data + 1;
end

// Sequential logic
always_ff @(posedge clk) begin
    if (rst) begin
        data <= '0;
    end else begin
        data <= data_next;
    end
end

5. Production Quality (MANDATORY)

Never generate:

• Placeholder code or comments like // TODO
• Stopgap solutions
• Temporary modules
• Unverifiable logic

Naming Conventions

RTL Elements

File Naming

Critical: Module name MUST match file name exactly (case-sensitive).

Design Patterns

State Machine Template

Use three-process state machine with typed enums:

// 1. State type with encoding hint
(* fsm_encoding = "one_hot" *)
typedef enum logic [3:0] {
    IDLE        = 4'b0001,
    PROCESSING  = 4'b0010,
    WAITING     = 4'b0100,
    ERROR       = 4'b1000
} state_t;

state_t state, state_next;

// 2. Helper function for debug (recommended)
function automatic string state_to_string(state_t st);
    case (st)
        IDLE:       return "IDLE";
        PROCESSING: return "PROCESSING";
        WAITING:    return "WAITING";
        ERROR:      return "ERROR";
        default:    return "UNKNOWN";
    endcase
endfunction

// 3. Combinational next-state logic
always_comb begin
    state_next = state;  // Default: hold state
    
    case (state)
        IDLE: begin
            if (start) state_next = PROCESSING;
        end
        PROCESSING: begin
            if (done) state_next = IDLE;
            else if (error) state_next = ERROR;
        end
        // ... other states
    endcase
end

// 4. Sequential state register
always_ff @(posedge clk) begin
    if (rst) begin
        state <= IDLE;
    end else begin
        state <= state_next;
    end
end

// 5. Output logic
always_comb begin
    busy = (state == PROCESSING);
    error_flag = (state == ERROR);
end

Parameter Width Calculations

Use $clog2() for width calculations:

module Fifo #(
    parameter int DEPTH = 64,
    parameter int DATA_WIDTH = 8
)(/*...*/);
    // Address width: log2(DEPTH)
    localparam int ADDR_WIDTH = $clog2(DEPTH);  // 6 bits for 64 entries
    
    // Count width: log2(DEPTH) + 1 for full detection
    localparam int COUNT_WIDTH = $clog2(DEPTH) + 1;  // 7 bits
    
    logic [ADDR_WIDTH-1:0]  wr_ptr, rd_ptr;
    logic [COUNT_WIDTH-1:0] count;  // 0 to DEPTH (inclusive)
endmodule

Critical: 64-entry FIFO requires 6-bit addresses (0-63) and 7-bit counter (0-64).

Module Header Format

`timescale 1ns / 1ps

// Brief module description (1-2 lines)
// Key features or notes
module Module_Name #(
    // Parameters grouped by category
    parameter int WIDTH = 32,
    parameter int DEPTH = 64
)(
    // Clock and reset first
    input  logic                clk,
    input  logic                rst,
    
    // Input signals grouped logically
    input  logic [WIDTH-1:0]    data_in,
    input  logic                valid_in,
    
    // Output signals grouped logically
    output logic [WIDTH-1:0]    data_out,
    output logic                valid_out,
    
    // Debug signals last (if any)
    output logic [7:0]          debug_state
);
    // Module body
endmodule

Interface Definition with Modports

`timescale 1ns / 1ps

interface axi4_lite_if #(
    parameter int ADDR_WIDTH = 32,
    parameter int DATA_WIDTH = 32
)(
    input logic clk,
    input logic rst
);
    // Signal declarations
    logic [ADDR_WIDTH-1:0] awaddr;
    logic                  awvalid;
    logic                  awready;
    // ... other signals
    
    // Modport for master
    modport master (
        output awaddr, awvalid,
        input  awready
        // ... other directions
    );
    
    // Modport for slave
    modport slave (
        input  awaddr, awvalid,
        output awready
        // ... other directions
    );
endinterface

Project-Specific Rules

Register Management (JSON SSOT)

Register definitions come from register_map/axiuart_registers.json. Never hardcode addresses.

import axiuart_reg_pkg::*;

module Register_Block #(
    parameter logic [31:0] BASE_ADDR = 32'h4000_0000
)(/*...*/);
    // Compute relative offsets
    localparam logic [11:0] REG_CONTROL_OFFSET = 
        (axiuart_reg_pkg::REG_CONTROL - BASE_ADDR);
    
    always_comb begin
        case (addr_offset)
            REG_CONTROL_OFFSET: rdata = control_reg;
            REG_STATUS_OFFSET:  rdata = status_reg;
            default:            rdata = '0;
        endcase
    end
endmodule

Debug Signal Instrumentation

Prefix debug signals with debug_:

module Frame_Parser (
    // Functional ports
    input  logic clk, rst,
    output logic frame_valid,
    
    // Debug ports (at end)
    output logic [7:0] debug_rx_data,
    output logic [3:0] debug_state,
    output logic       debug_crc_error
);
    // Implementation
endmodule

Pre-Commit Checklist

Before committing RTL code:

• `timescale 1ns / 1ps present in every file
• All variable declarations at beginning of module/block
• Naming conventions followed (modules, signals, parameters)
• Reset type is synchronous active-high (or explicitly inverted)
• FIFO/counter widths correct (use $clog2())
• always_ff for sequential, always_comb for combinational
• Module name matches file name exactly
• No placeholder code or TODO comments
• State machines use typed enums
• Interface modports defined (if using interfaces)
• Comments in English, limited to non-obvious logic

Compilation Requirements

All code must compile with 0 errors, 0 warnings:

dsim -genimage image.so -sv -timescale 1ns/1ps -f dsim_config.f

Additional Resources

• Full coding standards: docs/systemverilog_coding_standards.md
• Quick naming reference: docs/sv_naming_quick_ref.md
• Project architecture: rtl/README.md

Summary

Core RTL coding principles:

1. `timescale 1ns / 1ps at top of every file
2. Modules: Capitalized_With_Underscores, signals: lowercase_with_underscores
3. always_ff for sequential, always_comb for combinational
4. Synchronous active-high reset (default)
5. All declarations at beginning of module/block
6. No placeholder code - production quality only
7. Module name matches file name exactly

Converted and distributed by TomeVault — claim your Tome and manage your conversions.