Network Troubleshooter
Overview
Diagnose network issues systematically using an OSI-layer approach: physical → data link → network → transport → application. Each layer is verified before moving up.
Process
Step 1: Understand the Symptom
Classify the network issue:
| Symptom |
Likely Layer |
Start Point |
| "No internet" |
L1-L3 |
Check interface status |
| "Can't reach X" |
L3-L4 |
Check DNS, then routing |
| "Connection timeout" |
L3-L4 |
Check routing, firewall |
| "Connection refused" |
L4-L7 |
Service not listening |
| "Slow connection" |
L1-L7 |
Check latency, bandwidth |
| "SSL/TLS error" |
L5-L7 |
Check certs, protocol |
| "DNS not resolving" |
L7 (DNS) |
Check DNS config |
| "Intermittent drops" |
L1-L3 |
Check interface stats |
Step 2: Layer 1-2 (Physical/Link)
Interface status:
| Platform |
Command |
| Windows |
Get-NetAdapter | Select Name, Status, LinkSpeed, MediaConnectionState |
| Linux |
ip link show |
| macOS |
ifconfig | grep -E "^[a-z]|status" |
Interface statistics (errors/drops):
| Platform |
Command |
| Windows |
Get-NetAdapterStatistics | Select Name, ReceivedUnicastPackets, ReceivedPacketErrors, OutboundPacketErrors |
| Linux |
ip -s link show |
| macOS |
netstat -i |
WiFi signal (if wireless):
| Platform |
Command |
| Windows |
netsh wlan show interfaces |
| Linux |
iwconfig 2>/dev/null || nmcli dev wifi |
| macOS |
/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I |
Step 3: Layer 3 (Network)
IP configuration:
| Platform |
Command |
| Windows |
Get-NetIPAddress | Where AddressFamily -eq IPv4 | Select InterfaceAlias, IPAddress, PrefixLength |
| Linux |
ip -4 addr show |
| macOS |
ifconfig | grep "inet " |
Default gateway:
| Platform |
Command |
| Windows |
Get-NetRoute -DestinationPrefix 0.0.0.0/0 | Select NextHop, InterfaceAlias |
| Linux |
ip route show default |
| macOS |
route -n get default | grep gateway |
Ping gateway:
| Platform |
Command |
| All |
ping -c 3 [gateway_ip] (Linux/Mac) or ping -n 3 [gateway_ip] (Windows) |
Ping external (verify internet):
| Platform |
Command |
| All |
ping -c 3 8.8.8.8 or ping -n 3 8.8.8.8 |
Step 4: Layer 4-7 (Transport/Application)
DNS resolution:
| Platform |
Command |
| All |
nslookup [target_host] |
| Linux/Mac |
dig [target_host] +short |
DNS configuration:
| Platform |
Command |
| Windows |
Get-DnsClientServerAddress -AddressFamily IPv4 | Select InterfaceAlias, ServerAddresses |
| Linux |
cat /etc/resolv.conf |
| macOS |
scutil --dns | grep nameserver |
Port connectivity:
| Platform |
Command |
| Windows |
Test-NetConnection -ComputerName [host] -Port [port] |
| Linux |
nc -zv [host] [port] 2>&1 or timeout 5 bash -c "echo > /dev/tcp/[host]/[port]" && echo open || echo closed |
| macOS |
nc -zv [host] [port] 2>&1 |
Traceroute:
| Platform |
Command |
| Windows |
tracert -d [host] |
| Linux |
traceroute -n [host] 2>/dev/null || tracepath [host] |
| macOS |
traceroute -n [host] |
Active connections:
| Platform |
Command |
| Windows |
Get-NetTCPConnection -State Established | Select LocalAddress, LocalPort, RemoteAddress, RemotePort, OwningProcess | Sort RemoteAddress |
| Linux |
ss -tunp state established |
| macOS |
netstat -an | grep ESTABLISHED |
Listening ports:
| Platform |
Command |
| Windows |
Get-NetTCPConnection -State Listen | Select LocalAddress, LocalPort, OwningProcess |
| Linux |
ss -tlnp |
| macOS |
lsof -iTCP -sTCP:LISTEN -n -P |
Step 5: Advanced Checks (if needed)
Firewall rules:
| Platform |
Command |
| Windows |
Get-NetFirewallRule -Enabled True -Direction Inbound | Select DisplayName, Action | Format-Table |
| Linux |
iptables -L -n 2>/dev/null || nft list ruleset 2>/dev/null |
| macOS |
pfctl -sr 2>/dev/null |
SSL/TLS verification:
| Platform |
Command |
| All |
openssl s_client -connect [host]:443 -servername [host] </dev/null 2>/dev/null | openssl x509 -noout -dates -subject |
| Windows |
[Net.ServicePointManager]::SecurityProtocol; Invoke-WebRequest -Uri https://[host] -Method HEAD |
Bandwidth test (if latency is fine but throughput is bad):
| Platform |
Command |
| All |
curl -o /dev/null -w "Speed: %{speed_download} bytes/sec\nTime: %{time_total}s\n" https://speed.cloudflare.com/__down?bytes=10000000 |
Step 6: Present Diagnosis
## Network Diagnosis Report
### Path: [source] → [destination]
| Layer | Check | Result | Status |
|-------|-------|--------|--------|
| L1-L2 | Interface | [up/down, speed] | [OK/FAIL] |
| L3 | IP config | [IP, gateway] | [OK/FAIL] |
| L3 | Ping gateway | [latency] | [OK/FAIL] |
| L3 | Ping external | [latency] | [OK/FAIL] |
| L7 | DNS | [resolved IP] | [OK/FAIL] |
| L4 | Port [N] | [open/closed] | [OK/FAIL] |
| L7 | Service | [response] | [OK/FAIL] |
### Failure Point
**Layer:** [where it breaks]
**Evidence:** [command output]
### Resolution
1. [Fix for the identified layer]
2. [Verification command to confirm fix]
Rules
- Follow OSI layers IN ORDER - don't jump to L7 if L3 is broken
- NEVER modify firewall rules without explicit permission
- NEVER change DNS/network settings without asking
- If ping to gateway fails, don't bother testing higher layers
- For intermittent issues, run multiple samples (ping -c 10)
- Always test with IP first, then hostname (to isolate DNS vs routing)
Converted and distributed by TomeVault — claim your Tome and manage your conversions.
1---2name: network-troubleshooter3description: Use when the user has connectivity issues, DNS problems, can't reach a service, or needs to diagnose network performance. Follows OSI-model approach from bottom to top.4---56# Network Troubleshooter78## Overview910Diagnose network issues systematically using an OSI-layer approach: physical → data link → network → transport → application. Each layer is verified before moving up.1112## Process1314### Step 1: Understand the Symptom1516Classify the network issue:1718| Symptom | Likely Layer | Start Point |19|---------|-------------|-------------|20| "No internet" | L1-L3 | Check interface status |21| "Can't reach X" | L3-L4 | Check DNS, then routing |22| "Connection timeout" | L3-L4 | Check routing, firewall |23| "Connection refused" | L4-L7 | Service not listening |24| "Slow connection" | L1-L7 | Check latency, bandwidth |25| "SSL/TLS error" | L5-L7 | Check certs, protocol |26| "DNS not resolving" | L7 (DNS) | Check DNS config |27| "Intermittent drops" | L1-L3 | Check interface stats |2829### Step 2: Layer 1-2 (Physical/Link)3031**Interface status:**32| Platform | Command |33|----------|---------|34| Windows | `Get-NetAdapter \| Select Name, Status, LinkSpeed, MediaConnectionState` |35| Linux | `ip link show` |36| macOS | `ifconfig \| grep -E "^[a-z]\|status"` |3738**Interface statistics (errors/drops):**39| Platform | Command |40|----------|---------|41| Windows | `Get-NetAdapterStatistics \| Select Name, ReceivedUnicastPackets, ReceivedPacketErrors, OutboundPacketErrors` |42| Linux | `ip -s link show` |43| macOS | `netstat -i` |4445**WiFi signal (if wireless):**46| Platform | Command |47|----------|---------|48| Windows | `netsh wlan show interfaces` |49| Linux | `iwconfig 2>/dev/null \|\| nmcli dev wifi` |50| macOS | `/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I` |5152### Step 3: Layer 3 (Network)5354**IP configuration:**55| Platform | Command |56|----------|---------|57| Windows | `Get-NetIPAddress \| Where AddressFamily -eq IPv4 \| Select InterfaceAlias, IPAddress, PrefixLength` |58| Linux | `ip -4 addr show` |59| macOS | `ifconfig \| grep "inet "` |6061**Default gateway:**62| Platform | Command |63|----------|---------|64| Windows | `Get-NetRoute -DestinationPrefix 0.0.0.0/0 \| Select NextHop, InterfaceAlias` |65| Linux | `ip route show default` |66| macOS | `route -n get default \| grep gateway` |6768**Ping gateway:**69| Platform | Command |70|----------|---------|71| All | `ping -c 3 [gateway_ip]` (Linux/Mac) or `ping -n 3 [gateway_ip]` (Windows) |7273**Ping external (verify internet):**74| Platform | Command |75|----------|---------|76| All | `ping -c 3 8.8.8.8` or `ping -n 3 8.8.8.8` |7778### Step 4: Layer 4-7 (Transport/Application)7980**DNS resolution:**81| Platform | Command |82|----------|---------|83| All | `nslookup [target_host]` |84| Linux/Mac | `dig [target_host] +short` |8586**DNS configuration:**87| Platform | Command |88|----------|---------|89| Windows | `Get-DnsClientServerAddress -AddressFamily IPv4 \| Select InterfaceAlias, ServerAddresses` |90| Linux | `cat /etc/resolv.conf` |91| macOS | `scutil --dns \| grep nameserver` |9293**Port connectivity:**94| Platform | Command |95|----------|---------|96| Windows | `Test-NetConnection -ComputerName [host] -Port [port]` |97| Linux | `nc -zv [host] [port] 2>&1` or `timeout 5 bash -c "echo > /dev/tcp/[host]/[port]" && echo open \|\| echo closed` |98| macOS | `nc -zv [host] [port] 2>&1` |99100**Traceroute:**101| Platform | Command |102|----------|---------|103| Windows | `tracert -d [host]` |104| Linux | `traceroute -n [host] 2>/dev/null \|\| tracepath [host]` |105| macOS | `traceroute -n [host]` |106107**Active connections:**108| Platform | Command |109|----------|---------|110| Windows | `Get-NetTCPConnection -State Established \| Select LocalAddress, LocalPort, RemoteAddress, RemotePort, OwningProcess \| Sort RemoteAddress` |111| Linux | `ss -tunp state established` |112| macOS | `netstat -an \| grep ESTABLISHED` |113114**Listening ports:**115| Platform | Command |116|----------|---------|117| Windows | `Get-NetTCPConnection -State Listen \| Select LocalAddress, LocalPort, OwningProcess` |118| Linux | `ss -tlnp` |119| macOS | `lsof -iTCP -sTCP:LISTEN -n -P` |120121### Step 5: Advanced Checks (if needed)122123**Firewall rules:**124| Platform | Command |125|----------|---------|126| Windows | `Get-NetFirewallRule -Enabled True -Direction Inbound \| Select DisplayName, Action \| Format-Table` |127| Linux | `iptables -L -n 2>/dev/null \|\| nft list ruleset 2>/dev/null` |128| macOS | `pfctl -sr 2>/dev/null` |129130**SSL/TLS verification:**131| Platform | Command |132|----------|---------|133| All | `openssl s_client -connect [host]:443 -servername [host] </dev/null 2>/dev/null \| openssl x509 -noout -dates -subject` |134| Windows | `[Net.ServicePointManager]::SecurityProtocol; Invoke-WebRequest -Uri https://[host] -Method HEAD` |135136**Bandwidth test (if latency is fine but throughput is bad):**137| Platform | Command |138|----------|---------|139| All | `curl -o /dev/null -w "Speed: %{speed_download} bytes/sec\nTime: %{time_total}s\n" https://speed.cloudflare.com/__down?bytes=10000000` |140141### Step 6: Present Diagnosis142143```144## Network Diagnosis Report145146### Path: [source] → [destination]147148| Layer | Check | Result | Status |149|-------|-------|--------|--------|150| L1-L2 | Interface | [up/down, speed] | [OK/FAIL] |151| L3 | IP config | [IP, gateway] | [OK/FAIL] |152| L3 | Ping gateway | [latency] | [OK/FAIL] |153| L3 | Ping external | [latency] | [OK/FAIL] |154| L7 | DNS | [resolved IP] | [OK/FAIL] |155| L4 | Port [N] | [open/closed] | [OK/FAIL] |156| L7 | Service | [response] | [OK/FAIL] |157158### Failure Point159**Layer:** [where it breaks]160**Evidence:** [command output]161162### Resolution1631. [Fix for the identified layer]1642. [Verification command to confirm fix]165```166167## Rules168169- Follow OSI layers IN ORDER - don't jump to L7 if L3 is broken170- NEVER modify firewall rules without explicit permission171- NEVER change DNS/network settings without asking172- If ping to gateway fails, don't bother testing higher layers173- For intermittent issues, run multiple samples (ping -c 10)174- Always test with IP first, then hostname (to isolate DNS vs routing)175176---177> Converted and distributed by [TomeVault](https://tomevault.io/claim/skyvanguard) — claim your Tome and manage your conversions.178<!-- tomevault:4.0:skill_md:2026-04-13 -->
tomevault-io