Nstbrowser AI Agent

nstbrowser-ai-agent

This skill is for the Nstbrowser workflow.

Default Operating Mode

Use a known-good Nstbrowser profile and repeat the same --profile <name-or-id> on every browser command.

• This is the safest default for AI agents.
• Only introduce --session when the task truly needs an isolated multi-step workflow.
• In one daemon session, --profile twitter1 must switch to twitter1; do not assume the previous profile remains active.
• Do not assume refs such as @e1 will keep working after navigation or across a different session.

Prerequisites

• Nstbrowser desktop client is installed and running
• API key is configured with nstbrowser-ai-agent config set key YOUR_API_KEY or NST_API_KEY
• NST service is reachable at http://127.0.0.1:8848 unless the user configured a different host/port

First Checks

Run these first when the environment may be unconfigured:

nstbrowser-ai-agent nst status
nstbrowser-ai-agent profile list
nstbrowser-ai-agent --version

Fast Path

Use this path unless the user explicitly asks for something more specialized:

nstbrowser-ai-agent nst status
nstbrowser-ai-agent profile list
nstbrowser-ai-agent verify --profile YOUR_PROFILE
nstbrowser-ai-agent --profile YOUR_PROFILE open https://example.com
nstbrowser-ai-agent --profile YOUR_PROFILE snapshot -i
nstbrowser-ai-agent --profile YOUR_PROFILE click @e1
nstbrowser-ai-agent --profile YOUR_PROFILE get url
nstbrowser-ai-agent --profile YOUR_PROFILE screenshot --annotate /tmp/page.png

Replace YOUR_PROFILE with a profile from profile list.

If you do not have a clean profile yet:

nstbrowser-ai-agent profile create task-profile
nstbrowser-ai-agent --profile task-profile open https://example.com

Core NST Commands

Configuration

nstbrowser-ai-agent config set key YOUR_API_KEY
nstbrowser-ai-agent config show
nstbrowser-ai-agent config get key

Diagnostics

Use only the forms below:

nstbrowser-ai-agent nst status
nstbrowser-ai-agent profile list
nstbrowser-ai-agent verify YOUR_PROFILE
nstbrowser-ai-agent verify --profile YOUR_PROFILE
nstbrowser-ai-agent repair

Profile Management

• profile list Use when you need a fast human-readable list of candidate profiles. Important parameter: --verbose returns the full NST profile object instead of the shorter summary.

• profile list-cursor --page-size <size> [--cursor <token>] [--direction next|prev] Use when there are many profiles and you want deterministic paging. --page-size limits one page. --cursor continues from a previously returned cursor. --direction tells NST whether that cursor is for the next page or previous page.

• profile show <name-or-id> Use when you need one profile's exact group, proxy, tags, platform, or last launch info.

• profile create <name> [--platform <Windows|macOS|Linux>] [--kernel <version>] [--group-id <id>] Use when you need a clean profile for a new task. --kernel requests a preferred kernel milestone; NST may normalize it to a currently supported version. Optional proxy parameters: --proxy-host <host>, --proxy-port <port>, --proxy-type <http|https|socks5>, --proxy-username <user>, --proxy-password <pass>.

• profile proxy show <name-or-id> Use when proxy behavior looks suspicious and you want to inspect the saved proxy config and last proxy check result.

• profile proxy update <name-or-id> --host <host> --port <port> [--type <type>] [--username <user>] [--password <pass>] Use when a profile should keep the same cookies/history but change to a different proxy.

• profile proxy reset <name-or-id> [name-or-id...] Use when a profile should go back to local/default routing.

• profile tags list, profile tags create, profile tags update, profile tags clear Use when you need to organize profiles for repeated agent workflows. profile tags create only needs a tag name; the CLI fills in a default tag color.

• profile groups list, profile groups change <group-id> <name-or-id> [name-or-id...] Use when you need to discover valid NST group IDs or move profiles into a specific group.

Browser Management

• browser list Use when you need to see which profile browsers or temporary browsers are already running.

• browser start <name-or-id> [--headless] [--auto-close] Use when you want the browser running before the first open. --headless requests headless launch. --auto-close asks NST to close that browser when its owner exits.

• browser pages <name-or-id> Use when you need the current debuggable pages in one running browser.

• browser debugger <name-or-id> Use when you need the debugger port and browser-level WebSocket endpoint.

• browser cdp-url <name-or-id> Use when you only need the browser-level CDP WebSocket URL.

• browser connect <name-or-id> Use when you want NST to start the browser if needed and immediately return connection info.

• browser start-once [--platform <platform>] [--kernel <kernel>] [--headless] [--auto-close] Use only for throwaway work that should not persist in a saved profile.

• browser cdp-url-once Use when a temporary browser is enough and you only need its CDP URL.

• browser connect-once [--platform <platform>] [--kernel <kernel>] Use when one command should both create a temporary browser and return CDP connection info.

• browser stop <name-or-id> and browser stop-all Use for cleanup after the task or when stale browsers should be cleared.

When to Use Which NST Command

• Use nst status first when the environment itself may be broken.
• Use profile list when you only need a profile name to start work quickly.
• Use profile list-cursor when the workspace has too many profiles for one list.
• Use profile show when the question is about one specific profile's configuration.
• Use verify before real work when the profile may be stale or untrusted.
• Use repair after verify reports stale browser state or repeated attach failures.
• Use browser start when you want explicit control over browser launch.
• Use --profile <name-or-id> directly on browser actions when the goal is task execution, not management.

Browser Actions

All browser actions can use --profile <name-or-id>. The value may be a profile name or UUID.

Recommended Workflow

Prefer this workflow over temporary browsers:

nstbrowser-ai-agent --profile YOUR_PROFILE open https://example.com
nstbrowser-ai-agent --profile YOUR_PROFILE snapshot -i
nstbrowser-ai-agent --profile YOUR_PROFILE click @e1
nstbrowser-ai-agent --profile YOUR_PROFILE get url
nstbrowser-ai-agent --profile YOUR_PROFILE screenshot --annotate /tmp/page.png
nstbrowser-ai-agent browser stop YOUR_PROFILE

Session Workflow

Use this only when the user explicitly needs isolation or a longer daemon-backed run. Keep the same --session and --profile on every related command.

If the task intentionally changes to a different Nstbrowser profile inside the same --session, repeat the new --profile explicitly on the switching command.

nstbrowser-ai-agent --session task-run --profile YOUR_PROFILE open https://example.com
nstbrowser-ai-agent --session task-run --profile YOUR_PROFILE snapshot -i
nstbrowser-ai-agent --session task-run --profile YOUR_PROFILE click @e1
nstbrowser-ai-agent --session task-run --profile YOUR_PROFILE tab new https://iana.org
nstbrowser-ai-agent --session task-run --profile YOUR_PROFILE get url

Temporary Browser Workflow

Use browser start-once only when the user wants a throwaway browser and does not need profile persistence:

nstbrowser-ai-agent browser start-once
nstbrowser-ai-agent open https://example.com
nstbrowser-ai-agent snapshot -i

Useful Global Options

--profile <name-or-id>   Use a specific Nstbrowser profile
--session <name>         Use an isolated daemon session
--session-name <name>    Auto-save and restore browser state
--json                   Machine-readable output
--headers <json>         Scoped HTTP headers for the opened origin
--proxy <server>         Override proxy for the launched browser session
--proxy-bypass <hosts>   Bypass proxy for specific hosts
--annotate               Add numbered labels to screenshot output
--full                   Full-page screenshot

Recommended Patterns

1. Start with nst status and profile list if anything about the environment is unclear.
2. Prefer snapshot -i before click or fill so refs are fresh.
3. Repeat the same --profile on every browser command unless you are intentionally using a dedicated --session.
4. Use --session only when you need an isolated workflow, and then keep both --session and --profile consistent across the whole run.
5. Use repair before retrying if NST reports stale browser state or multiple stuck instances.
6. Prefer a clean or newly created profile if an existing profile has broken proxy or network settings.

Common Failure Recovery

• Profile not found: run profile list and use the exact profile name or UUID.
• @e1 not working: run snapshot -i again because refs change after navigation.
• Refs are order-dependent: generate them first, then use them later in the same session.
• @e1 is treated like CSS: you probably changed profile or session context, or forgot to pass the same --profile again.
• Browser not running: run browser start <name-or-id> or re-run open.
• NST agent not responding: start the Nstbrowser desktop client, then run nst status.
• Command appears stale: use a new --session name or run browser stop <name-or-id> / browser stop-all.
• open https://example.com lands on a Chrome error page: switch to a clean profile or create a new one because the current profile may have a broken proxy.

Notes

• browser start-once creates a temporary Nstbrowser-managed browser.
• Profile-backed sessions persist cookies and site storage in the Nstbrowser profile itself.
• --profile is for Nstbrowser profile selection only.

Source: Nstbrowser/nstbrowser-ai-agent — distributed by TomeVault.