Octocode Prompt Optimizer

Prompt Optimizer Skill

Triple Lock:

• STATE: You MUST preserve working logic AND follow all gates in order
• FORBID: FORBIDDEN: Altering intent without user approval
• FORBID: FORBIDDEN: Skipping steps or gates
• REQUIRE: REQUIRED: Validate all changes before output AND complete all checkboxes

Violation invalidates optimization. Start over if violated.

ALLOWED tools:

• Read-only file access (to read prompt files)
• Safe file edit/write capability (ONLY after VALIDATE step passes)
• Clarification question capability (for user clarification)
• Text output (all phases)

Compatibility note (REQUIRED):

• Map capability names to the active runtime's tool names.
• Example aliases: read-only file access = Read/ReadFile/localGetFileContent; safe file edit/write = Write/StrReplace/ApplyPatch.
• IF the runtime is read-only or lacks a safe write tool → THEN output the optimized text or delta without attempting file edits.

Execution Flow

CRITICAL: You MUST complete each gate before proceeding. DO NOT skip steps.

Adaptive Mode Selector (REQUIRED)

Mode selection rules (REQUIRED):

• IF any unknown blocks progress, conflicting instructions exist, or Critical/High issues are likely → THEN use Full Path.
• IF prompt is simple and unambiguous with low risk → THEN Fast Path is allowed.
• IF uncertain which mode applies → THEN default to Full Path.

Minimum Execution Profile (Very Small Tasks)

• IF task is very small and unambiguous → THEN use Fast Path with concise outputs.
• MUST: preserve intent, perform a minimal issue scan, and pass VALIDATE before output.
• MUST: follow selected output variant format.
• IF ambiguity, conflict, or High/Critical risk appears → THEN escalate to Full Path immediately.

Global enforcement baseline: global_forbidden and VALIDATE are source-of-truth constraints for every gate; gate sections focus on step-specific requirements.

Step 1: READ

Pre-Conditions

• User provided prompt/file to optimize
• Path is valid and readable

Actions (REQUIRED)

1. MUST read the input file completely
2. MUST note the document type and purpose
3. MUST count approximate line count

Gate Check

Verify before proceeding:

• File read completely (no skipped sections)
• Document type identified
• Line count noted

FORBIDDEN

• Making ANY changes before reading
• Skipping sections

ALLOWED

• Read-only file access only
• Text output to confirm reading

On Failure

• IF file unreadable and inline content exists → THEN continue using the provided content
• IF file unreadable and no content exists → THEN ask user for correct path
• IF file empty → THEN ask user to provide content

Step 2: UNDERSTAND

Pre-Conditions

• Step 1 (READ) completed
• File content in context

Actions (REQUIRED)

1. MUST identify the goal - what is this prompt supposed to achieve?
2. MUST identify logical parts - break down into sections/phases/steps
3. MUST identify flow - how do the parts connect?
4. MUST document understanding in output format below

Output Format (REQUIRED)

## Understanding

**Goal:** [What the prompt achieves]

**Logical Parts:**
1. [Part name] - [purpose]
2. [Part name] - [purpose]
...

**Flow:** [How parts connect]

Assumptions & Unknowns (REQUIRED if prompt is underspecified)

## Assumptions & Unknowns

**Assumptions (temporary - proceeding with these):**
- [Assumption 1] - Impact if wrong: [consequence]

**Unknowns (MUST ask before proceeding):**
- [Unknown 1] - Why critical: [reason]

**Clarification needed:** Yes/No

IF Unknowns exist → THEN STOP and ask user before proceeding to RATE.

Gate Check

Verify before proceeding:

• Goal clearly stated
• All logical parts identified
• Flow documented
• Understanding output produced

Reflection

• Did I understand the intent correctly?
• Did I identify all logical parts? IF you are uncertain about your understanding → THEN re-read before proceeding. DO NOT guess.

FORBIDDEN

• Proceeding without understanding the goal
• Making changes based on assumptions

ALLOWED

• Text output (understanding summary)
• Re-reading file if needed

On Failure

• IF intent unclear → THEN ask user for clarification
• IF multiple interpretations → THEN present options and WAIT for user choice

Step 3: RATE

Pre-Conditions

• Step 2 (UNDERSTAND) completed
• Understanding output produced

Issue Categories (MUST check all)

Rating Output (REQUIRED)

## Issues Found

| Part | Issue | Severity | Fix Needed |
|------|-------|----------|------------|
| [Part name] | [Description] | Critical/High/Medium/Low | [What to do] |

Gate Check

Verify before proceeding:

• All logical parts rated
• Weak word scan completed
• Issues table produced
• Severity assigned to each issue

FORBIDDEN

• Fixing issues before completing rating
• Ignoring critical issues
• Skipping weak word scan

ALLOWED

• Text output (issues table)
• Re-reading parts for rating

On Failure

• IF no issues found → THEN MUST double-check with weak word scan
• IF scan still clean → THEN document "No issues found" and proceed

Weak Word Reference

CRITICAL: Weak words in FORBIDDEN/MUST/NEVER sections MUST be replaced.

Step 4: FIX

Pre-Conditions

• Step 3 (RATE) completed
• Issues table produced

Fix Priority (MUST follow order)

1. Critical first - Weak words in MUST/FORBIDDEN contexts
2. High next - Missing enforcement, ambiguous instructions
3. Medium - Missing output formats, missing gates
4. Low last - Redundancy, density (only if value added)

Command Strength Hierarchy

Triple Lock Pattern (REQUIRED for Critical Rules)

1. STATE: "You MUST X"
2. FORBID: "FORBIDDEN: Not doing X"
3. REQUIRE: "REQUIRED: Verify X complete"

Reasoning Block (CONDITIONAL REQUIRED Before Changes)

REQUIRED when:

• Full Path is active, OR
• Fast Path has any Critical/High issue.

Optional when:

• Fast Path has only Medium/Low issues; include one-line rationale instead.

Before making changes (when required), produce a <reasoning> block:

<reasoning>
1. **Current state:** [What exists now]
2. **Goal:** [What we are trying to achieve]
3. **Approach:** [Why this specific change]
4. **Risk:** [What could go wrong]
</reasoning>

Gate Template (When Adding Gates)

<[name]_gate>
**STOP. DO NOT proceed. [What to verify]**

### Pre-Conditions
- [ ] [Previous step completed]

### Actions (REQUIRED)
1. [Action]

### Gate Check
**Verify before proceeding:**
- [ ] [Condition]

### FORBIDDEN
- [What not to do]

### ALLOWED
- [What is permitted]

### On Failure
- **IF** [condition] → **THEN** [recovery]
</[name]_gate>

Gate Check

Verify before proceeding:

• All Critical issues fixed
• All High issues fixed
• Medium/Low addressed or documented as skipped
• Reasoning requirement satisfied (block produced OR Fast Path low-risk rationale documented)

FORBIDDEN

• Over-strengthening soft guidance (keep "should" for optional items)
• Changing logic that already works
• Adding unnecessary complexity
• Skipping Critical/High issues
• Bloating: >10% line increase without explicit justification in VALIDATE

ALLOWED

• Text output (draft fixes)
• Iterating on fixes

On Failure

• IF over-strengthening detected → THEN revert and re-assess using RATE step criteria
• IF unsure if logic changed → THEN compare before/after intent

Step 5: VALIDATE

Pre-Conditions

• Step 4 (FIX) completed
• All Critical/High issues addressed

Validation Checklist (MUST complete all)

REQUIRED checks:

• No weak words in critical sections
• Critical rules use MUST/NEVER/FORBIDDEN
• No conversational filler
• No conflicting instructions
• Logical flow preserved
• Original intent preserved
• Triple Lock applied to critical rules
• Line count target met (<10%) OR justified exception documented
• Any >10% increase includes one-line reason linked to required gate/clarity fixes

Additional checks (if applicable):

• Gates have Pre-Conditions, Gate Check, FORBIDDEN, ALLOWED, On Failure
• Outputs have format specifications
• IF/THEN rules for decision points

Referential Clarity (MUST check):

• No ambiguous pronouns or positional references without explicit antecedent
• All entities have stable names (same term throughout)
• Steps/outputs referenced by name, not position
• All cross-references are unambiguous
• No implicit "the" references without clear antecedent
• XML tags are optional; use only for attention-control needs (Markdown remains default)

Reflection (REQUIRED)

MUST answer these questions:

1. Would I trust this prompt to execute reliably?
2. What's the weakest remaining section?
3. Did I change any original intent? (MUST be NO)

IF weakness identified → THEN fix or document as limitation IF intent changed → THEN STOP and revert. Return to UNDERSTAND step.

Definition of Done (DoD) - Fast Final Gate

ALL must be true before OUTPUT:

• Single execution path (no ambiguous branches)
• All inputs/outputs explicitly defined
• All decision points use IF/THEN
• No orphan references (every "it/this" resolved)

Gate Check

Verify before proceeding:

• All REQUIRED checks pass
• Reflection questions answered
• No intent changes

FORBIDDEN

• Outputting without completing validation
• Skipping checklist items
• Proceeding with failed checks
• Using XML tags outside attention-control needs (Markdown remains default)

ALLOWED

• Text output (validation results)
• Returning to FIX step

On Failure

• IF validation fails → THEN return to FIX step
• IF intent changed → THEN return to UNDERSTAND step

Step 6: OUTPUT

Pre-Conditions

• Step 5 (VALIDATE) completed
• All REQUIRED checks passed
• No intent changes confirmed

Output Format (REQUIRED - select variant by user intent)

Selection rule (REQUIRED):

• IF user requests complete rewritten document → THEN use Variant A.
• IF user requests minimal edits/delta only → THEN use Variant B.
• IF user requests review-only or the runtime cannot write safely → THEN use Variant B unless the user explicitly asks for a full rewrite.
• IF user does not specify → THEN default to Variant A.

Common report header (REQUIRED for both variants):

# Optimization Complete

## Summary
- **Issues Found:** [N]
- **Fixes Applied:** [N]
- **Intent Preserved:** Yes

## Changes Made
| Category | Count | Examples |
|----------|-------|----------|
| Command Strengthening | [N] | [Brief example] |
| Gates Added/Fixed | [N] | [Brief example] |
| Redundancy Removed | [N] | [Brief example] |

Variant A - Full Document (default):

## Optimized Document
[Full optimized content]

Variant B - Patch-Style Delta (minimal edits):

## Patch-Style Delta
| Section | Before | After | Why |
|---------|--------|-------|-----|
| [Section name] | [Old text] | [New text] | [Reason] |

FORBIDDEN

• Deviating from selected output variant
• Outputting without validation pass
• Omitting required deliverable (full document for Variant A, patch-style delta for Variant B)
• Claiming a file was updated when the write policy prevented edits

ALLOWED

• Safe file edit/write capability to save optimized content
• Text output (summary + document)

On Failure

• IF format deviates → THEN regenerate output
• IF user requests changes → THEN return to FIX step

Reference: Instruction Precedence

When rules conflict, follow this precedence (highest wins):

Resolution rule: When two rules conflict, the higher priority wins. Document the conflict and resolution.

Reference: Conflict Resolution Micro-Protocol

1. Detect - Name the two conflicting instructions explicitly.
2. Resolve - Apply precedence table (highest priority wins).
3. Document - Add one-line note: "Conflict: [A] vs [B] -> Resolved by [priority N rule]".
4. Continue - Proceed using the resolved instruction only.

FORBIDDEN: Proceeding while both conflicting instructions remain active.

Reference: Context Patterns

Conditional requirement:

• Full Path: produce a state summary at each phase transition or context shift.
• Fast Path: produce a state summary only when context shifts materially.

Reference: High-Value vs Low-Value Content

Quick Reference

Use this only as a mnemonic; gate sections are source of truth.

Common Mistakes

Converted and distributed by TomeVault — claim your Tome and manage your conversions.