Ralph Loop Setup

Ralph Loop Setup Skill

Set up and maintain autonomous TDD loops for iterative development with verification feedback.

When This Activates

• User asks to "set up Ralph" or "add autonomous loop" to a project
• User wants to update Ralph hooks based on latest practices
• Troubleshooting loop behavior (not iterating, verification failing)
• Setting up a new project for autonomous development

What is Ralph?

The Ralph Wiggum technique is an autonomous TDD workflow where Claude iteratively works on tasks until a verification command passes and a completion promise is detected.

Key components:

1. Start Command - Initializes loop with task and options
2. Loop Mechanism - Either stop hook (same-session) or external script (fresh-context)
3. State File - Tracks iteration count, completion promise
4. Context Files - progress.md for cross-session memory, prd.json for tasks, guardrails.md for learned constraints

Two Architectural Modes

Ralph supports two fundamentally different loop architectures. Fresh-context is the default for multi-task mode because it follows the true Ralph pattern: deliberate rotation, not accidental compaction.

Fresh-Context (Default for --next)

Uses an external bash script that spawns new Claude sessions each iteration.

/ralph-loop --next                          # Fresh-context by default
./scripts/ralph/ralph.sh --max-iterations 100

Pros: Each iteration starts clean, no context pollution, failures evaporate, true re-anchoring. Cons: More complex setup, loses conversation context. Best for: Multi-task backlogs, long runs (20+ iterations).

Same-Session (Opt-In)

Uses Claude Code's stop hook to block exit and re-prompt within the same session.

/ralph-loop "Fix all TypeScript errors"    # Single task = same-session
/ralph-loop --next --same-session          # Multi-task with same-session (opt-in)

Pros: Simpler setup, works within Claude Code's native system, preserves conversation context. Cons: Context accumulates, failed attempts stay in transcript. Best for: Bounded single tasks, short runs (under 20 iterations).

This follows Geoffrey Huntley's original vision, Gordon Mickel's flow-next, and Agrim Singh's "ralph for idiots" insight that Anthropic's same-session pattern is "anti-ralph" because it accumulates context until it rots.

Installation

To add Ralph loops to a project:

# From project root
/ralph-loop-setup

This creates:

• .claude/commands/ralph-loop.md - Start command (supports both modes)
• .claude/commands/ralph-cancel.md - Cancel/stop command (both modes)
• .claude/commands/ralph-planner.md - Plan tasks from GitHub issues
• .claude/hooks/stop-hook.sh - Same-session verification hook
• .claude/settings.json - Hook registration (or updates existing)
• scripts/ralph/ralph.sh - Fresh-context external loop
• scripts/ralph/ralph-stop.sh - Stop script (kills processes, cleans state)
• scripts/ralph/ralph-status.sh - Status dashboard script
• scripts/ralph/ralph-tail.sh - Log tail helper
• plans/progress.md - Cross-session context
• plans/guardrails.md - Learned constraints ("signs") that prevent repeated failures
• plans/prd.json - Task tracking

Usage

Once installed:

# Single task, same-session (default for single tasks)
/ralph-loop "Fix all TypeScript errors" --max-iterations 20

# Multi-task, fresh-context (default for --next)
/ralph-loop --next
/ralph-loop --next --max-iterations 100

# Multi-task with verbose output
/ralph-loop --next --verbose

# Multi-task with auto-opened monitor window (macOS)
/ralph-loop --next --monitor

# Multi-task with verbose + monitor (recommended)
/ralph-loop --next --verbose --monitor

# Multi-task, same-session (opt-in)
/ralph-loop --next --same-session

# With visual screenshots for UI regression review
/ralph-loop --next --screenshots

# Work on a separate branch
/ralph-loop --next --branch ralph/backlog

# Preview without starting
/ralph-loop --next --dry-run

# Cancel/stop active loop (works for both modes)
/ralph-cancel
/ralph-cancel --force  # Kill without prompting

# Run external loop directly
./scripts/ralph/ralph.sh --max-iterations 100 --branch ralph/backlog --verbose --monitor

Monitoring

Ralph provides several tools to monitor loop progress in real-time.

Verbose Mode (--verbose)

Adds detailed output during iterations:

• Timing for Claude sessions and verification runs
• Last 10 lines of output after each iteration
• File path logging

./scripts/ralph/ralph.sh --verbose
/ralph-loop --next --verbose

Auto-Monitor (--monitor)

Automatically opens a status dashboard in a new terminal window (macOS only).

./scripts/ralph/ralph.sh --monitor
/ralph-loop --next --monitor

Terminal detection: Prefers iTerm2 if installed/running, falls back to Terminal.app.

Status Dashboard

View loop status, task progress, and recent output:

# One-time status
./scripts/ralph/ralph-status.sh

# Live updates (refreshes every 2s)
./scripts/ralph/ralph-status.sh --watch

Shows:

• Loop status with colored indicators (RUNNING, VERIFYING, COMPLETE)
• Progress bar and iteration count
• Current task being worked on
• Task checklist with completion status
• Recent runs history
• Last 8 lines of current output

Log Tailing

Follow iteration output in real-time:

# Follow current/latest run
./scripts/ralph/ralph-tail.sh

# Follow all iteration files
./scripts/ralph/ralph-tail.sh --all

# Follow specific run
./scripts/ralph/ralph-tail.sh 20260113-120000

Status JSON File

Machine-readable status at .claude/ralph-status.local.json:

{
  "run_id": "20260113-120000",
  "iteration": 3,
  "max_iterations": 50,
  "status": "running",
  "current_task": {"id": "T-001", "title": "..."},
  "remaining_tasks": 2,
  "started_at": "2026-01-13T12:00:00-08:00",
  "updated_at": "2026-01-13T12:05:30-08:00",
  "branch": "main",
  "log_file": "scripts/ralph/runs/20260113-120000/iteration-3.txt"
}

Branch Handling Options

Ralph supports two ways to manage branches:

Option 1: CLI Flag (per-run)

Specify branch when starting the loop:

/ralph-loop --next --branch ralph/backlog-cleanup
/ralph-loop "Fix bugs" --branch feature/bugfix

Best for: Ad-hoc runs, different branches per task batch.

Option 2: prd.json branchName (per-batch)

Set branchName in prd.json for all tasks in that batch:

{
  "branchName": "feature/my-feature",
  "features": [...]
}

Then just run:

/ralph-loop --next

Ralph will automatically checkout/create the branch from prd.json.

Best for: Consistent branch for a set of related tasks.

Priority

If both are specified, --branch flag takes precedence over prd.json branchName.

Skipping Tasks

Some tasks cannot be automated (e.g., creating accounts, configuring API keys in dashboards). Use the skip field to exclude these from the loop while keeping them in prd.json for tracking.

prd.json Schema

{
  "id": "T-003",
  "title": "Configure API credentials",
  "github_issue": 83,
  "passes": false,
  "skip": true,
  "skipReason": "Requires manual account creation and API key setup",
  "notes": "Human needs to complete this manually"
}

Behavior

• Tasks with skip: true are excluded from task selection
• Loop can complete successfully even with skipped tasks remaining
• Status dashboard shows skipped tasks with ⊘ indicator
• Skipped tasks still count toward total but not toward "remaining"

When to Skip

• Account/credential setup requiring human login
• Dashboard configuration in external services
• Tasks requiring physical access or approval workflows
• Anything with "manual" in the acceptance criteria

Ralph Planner

Use /ralph-planner to generate prd.json entries from GitHub issues:

/ralph-planner                    # Interactive selection from open issues
/ralph-planner --labels bug,P1    # Filter by labels
/ralph-planner --milestone v2.0   # Filter by milestone
/ralph-planner --limit 10         # Limit number of issues

Features

• Fetches open issues from GitHub via gh issue list
• Analyzes issues for automatable scope
• Detects manual tasks and suggests skip: true
• Extracts acceptance criteria from issue body
• Sets priority from labels (P0→high, P1→high, P2→medium, etc.)
• Avoids duplicates (skips issues already in prd.json)

Output

Adds new entries to plans/prd.json with proper structure. Run /ralph-loop --next --dry-run after planning to preview.

Guardrails (Signs)

Guardrails are learned constraints that prevent repeated failures. They persist in plans/guardrails.md and are read at the start of each iteration.

Philosophy: Progress should persist. Failures should evaporate.

Seed Guardrails

The template includes seed signs that prevent common pitfalls:

• SIGN-001: Verify Before Complete - Run verification before outputting completion promise
• SIGN-002: Check All Tasks Before Complete - Re-read prd.json to confirm ALL tasks pass
• SIGN-003: Document Learnings - Update progress.md with patterns discovered
• SIGN-004: Small Focused Changes - Keep changes incremental
• SIGN-005: Use Skip for Manual Tasks - Set skip: true for tasks requiring human intervention
• SIGN-006: Reference GitHub Issues in Commits - Include Fixes #N in commit messages

Adding New Signs

When Ralph makes a repeated mistake, add a sign to prevent it:

### SIGN-XXX: [Descriptive Name]
**Trigger:** [When this applies]
**Instruction:** [What to do instead]
**Reason:** [Why this matters]
**Added after:** [Iteration N / date when learned]

Signs are append-only. Mistakes evaporate, lessons accumulate.

Visual Screenshots (UI Regression Review)

The --screenshots flag instructs Claude to capture visual screenshots via Playwright MCP. This helps catch UI/UX regressions that tests don't catch.

Note: In Playwright terminology, a "snapshot" is an accessibility/DOM tree capture, while a "screenshot" is a visual PNG/JPEG image. This feature uses browser_take_screenshot for visual captures.

How It Works

1. Fresh-context mode: The --screenshot flag is passed to ralph.sh, which adds Playwright instructions to the prompt
2. Same-session mode: The state file includes screenshots: true, prompting Claude to use Playwright MCP
3. Output: Screenshots saved to scripts/ralph/runs/{run-id}/screenshots/

Usage

# Capture screenshots during loop iterations
/ralph-loop --next --screenshots

# Fresh-context mode passes flag to ralph.sh
./scripts/ralph/ralph.sh --screenshot

Playwright MCP Tools Used

When --screenshots is enabled, Claude uses:

• browser_navigate - Navigate to key pages
• browser_take_screenshot - Capture visual PNG screenshots

Output Location

Screenshots are saved in the run directory:

scripts/ralph/runs/20260113-120000/
└── screenshots/
    ├── iteration-1-dashboard.png
    ├── iteration-1-settings.png
    └── iteration-3-final.png

Important: Screenshots are advisory, non-blocking. Tests passing is the gate; visual review is recommended but doesn't block completion.

Project Requirements

Ralph loops work best with projects that have:

1. Verification command - A single command that validates code quality

   • Node/Next.js: pnpm verify (test + tsc + lint)
   • Python: make check or pytest && mypy && ruff
   • Go: go test ./... && go vet ./...

2. Clear acceptance criteria - Tasks with measurable completion

3. Test coverage - Automated tests for feedback

Customization

Verification Command

Edit .claude/hooks/stop-hook.sh:

# Change this line to your project's verification command
VERIFY_OUTPUT=$(pnpm verify 2>&1) || true

Context Files Location

Default location is plans/. Edit the start command to change:

# In .claude/commands/ralph-loop.md
1. **Read plans/progress.md** → Change to your path
2. **Check plans/prd.json** → Change to your path

Templates

See the templates directory for:

• ralph-loop-command.md - Start command (both modes)
• ralph-cancel-command.md - Cancel/stop command
• ralph-planner.md - Plan tasks from GitHub issues
• ralph-fresh.sh - External loop script
• ralph-stop.sh - Stop script (kills processes)
• ralph-status.sh - Status dashboard script
• ralph-tail.sh - Log tail helper
• prd-template.json - Task structure with skip field
• progress-template.md - Session notes

Troubleshooting

Loop not iterating

1. Check if .claude/settings.json has correct hook registration
2. Verify hook format is v2.1: {"type": "command", "command": "..."}
3. Check if state file .claude/ralph-loop.local.md exists

Verification not running

1. Ensure hook is executable: chmod +x .claude/hooks/stop-hook.sh
2. Check if verification command works standalone
3. Look for jq dependency (required for JSON output)

Premature completion

1. Verify completion promise format: <promise>COMPLETE</promise>
2. Check transcript for promise detection
3. Increase max iterations if needed

Branch not switching

1. Check --branch flag syntax: --branch branch-name (no =)
2. Verify prd.json has branchName at top level (not inside tasks)
3. Ensure no uncommitted changes blocking checkout

Reference

• Geoffrey Huntley's Original Ralph - The canonical origin story
• Agrim Singh's "ralph for idiots" - Fresh-context as the true pattern
• Ryan Carson's Guide - Step-by-step tutorial
• snarktank/ralph - Ryan Carson's implementation
• Gordon Mickel's flow-next - Fresh-context critique
• frankbria/ralph-claude-code - Circuit breaker enhancements
• Anthropic Long-Running Agents

Maintenance

See maintenance.md for on-demand cleanup tasks:

• Progress log cleanup - Archive and truncate progress.md when it gets long
• PRD cleanup - Archive completed tasks from prd.json
• Run logs cleanup - Remove old fresh-context run directories

Related Skills

• managing-context - Handoffs for manual session continuity
• frontmatter-scanner - Scanning files for context

Converted and distributed by TomeVault — claim your Tome and manage your conversions.