Rust Sdk Testing Patterns

Miden Testing Patterns (MockChain)

Test File Setup

Tests go in integration/tests/. All tests are async and use MockChain for local execution without a network.

See counter_test.rs for a complete working test covering imports, MockChain setup, contract building, account creation with storage, note creation, transaction execution, and storage verification.

Step-by-Step Test Pattern

1. Initialize MockChain Builder

See counter_test.rs line 21 for the pattern: let mut builder = MockChain::builder();

2. Create Sender/Wallet Accounts

See counter_test.rs lines 24-26 for the basic wallet pattern. For wallets with pre-funded assets, use builder.add_existing_wallet_with_assets(Auth::BasicAuth { auth_scheme: AuthSchemeId::Falcon512Poseidon2 }, [FungibleAsset::new(faucet.id(), 100)?.into()]).

3. Set Up Faucets (for fungible assets)

let faucet = builder.add_existing_basic_faucet(
    Auth::BasicAuth {
        auth_scheme: AuthSchemeId::Falcon512Poseidon2,
    },
    "TOKEN",     // token symbol
    1000,        // max supply
    Some(10),    // total_issuance (None for 0)
)?;

4. Build Contracts

See counter_test.rs lines 29-35 for the pattern using build_project_in_dir.

5. Create Account with Storage

Storage slot naming convention (CRITICAL):

[component_package_or_name]::[snake_case(component_struct)]::[field_name]

Examples:

• Package miden:counter-account, component CounterContract, field count_map -> miden_counter_account::counter_contract::count_map
• Package miden:bank-account, component BankAccount, field balances -> miden_bank_account::bank_account::balances

Rule: Replace characters outside [A-Za-z0-9_] with _ in the package or component name.

See counter_test.rs lines 38-54 for the current pattern: populate InitStorageData, build the component from the compiled package, then register the account with builder.add_account_from_builder(...).

let counter_storage_slot = counter_storage_slot()?;
let mut init_storage_data = InitStorageData::default();
init_storage_data.insert_map_entry(counter_storage_slot.clone(), COUNTER_STORAGE_KEY, 0_u64)?;

let counter_component =
    AccountComponent::from_package(&contract_package, &init_storage_data)?;
let counter_account = builder.add_account_from_builder(
    Auth::BasicAuth {
        auth_scheme: AuthSchemeId::Falcon512Poseidon2,
    },
    AccountBuilder::new([3_u8; 32])
        .account_type(AccountType::RegularAccountImmutableCode)
        .storage_mode(AccountStorageMode::Public)
        .with_component(counter_component),
    AccountState::Exists,
)?;

For a single-value contract slot (paired with StorageValue<T> on-chain) instead of a map:

let mut init_storage_data = InitStorageData::default();
init_storage_data.insert_value(
    "miden_bank_account::bank_account::initialized",
    0_u64,
)?;

6. Create Notes

See counter_test.rs lines 56-64 for basic note creation with RandomCoin, NoteScript::from_package, and NoteBuilder.

For notes with assets and inputs:

use miden_client::{asset::FungibleAsset, crypto::RandomCoin, note::NoteScript, Felt};
use miden_standards::testing::note::NoteBuilder;

let mut note_rng = RandomCoin::new(NoteScript::from_package(note_package.as_ref())?.root());
let note = NoteBuilder::new(sender.id(), &mut note_rng)
    .package((*note_package).clone())
    .add_assets([FungibleAsset::new(faucet.id(), 50)?.into()])
    .note_storage([Felt::new(42), Felt::new(0)])?
    .build()?;

7. Add to MockChain and Build

See counter_test.rs lines 66-70 for seeding the note and building the mock chain. add_account_from_builder(...) has already registered the account in the builder, so at this stage you usually only need to add notes.

8. Execute Transaction

See counter_test.rs lines 73-82 for the full execution flow: build_tx_context -> execute() -> add_pending_executed_transaction() -> prove_next_block(). The single-transaction counter test does not call apply_delta() because counter_account is not reused after the build; final state is read from mock_chain.committed_account(...) after the block is proven. Multi-transaction tests that keep using the in-memory Account variable across steps should call account.apply_delta(&executed.account_delta())? after each execute() (see "Multi-Transaction Test Pattern" below).

9. Execute with Transaction Script

use miden_client::transaction::TransactionScript;

let tx_script_package = Arc::new(build_project_in_dir(
    Path::new("../contracts/my-tx-script"),
    true,
)?);
let program = tx_script_package.unwrap_program();
let tx_script = TransactionScript::new((*program).clone());

let executed = mock_chain
    .build_tx_context(account.clone(), &[], &[])?
    .tx_script(tx_script)
    .build()?
    .execute()
    .await?;

mock_chain.add_pending_executed_transaction(&executed)?;
mock_chain.prove_next_block()?;

let updated_account = mock_chain.committed_account(account.id())?;

10. Verify Storage State

See counter_test.rs lines 84-96 for reading the committed account state and asserting on the result.

11. Verify Output Notes

Important: add_output_note() is only available on MockChainBuilder (before build()); use it to seed the chain with existing notes. To verify output notes from a transaction, use extend_expected_output_notes() on TxContextBuilder:

use miden_client::{note::{Note, NoteAssets, NoteMetadata, NoteRecipient}, transaction::RawOutputNote};

let expected_note = Note::new(expected_assets, expected_metadata, expected_recipient);

let tx_context = mock_chain
    .build_tx_context(account.id(), &[note.id()], &[])?
    .extend_expected_output_notes(vec![RawOutputNote::Full(expected_note)])
    .build()?;

// execute() will verify output notes match
let executed = tx_context.execute().await?;

MockChain Note Interaction

Notes flow through MockChain in four steps:

1. Build the note from a compiled .masp package (see "Note Construction" below) or via NoteBuilder.
2. Seed with MockChainBuilder::add_output_note(RawOutputNote::Full(note.clone())) BEFORE builder.build(). This places the note on the chain so a later transaction can consume it. add_output_note(...) is only available on the builder; once builder.build() returns the MockChain, output notes can only appear as the result of executing a transaction. RawOutputNote is re-exported from miden_client::transaction.
3. Consume by passing the note ID to mock_chain.build_tx_context(account, &[note.id()], &[]). The transaction's note-script execution reads the consumed note's storage and assets.
4. Verify expected output notes with .extend_expected_output_notes(vec![RawOutputNote::Full(expected.clone())]) on the TxContextBuilder. tx_context.execute().await? will assert the produced output notes match.

After execute() and before add_pending_executed_transaction(...) + prove_next_block(): if a later step will keep using the in-memory Account variable (for example, to build another tx_context or assert account state directly), call account.apply_delta(&executed.account_delta())? to keep the variable in sync with the chain. Post-block reads should use mock_chain.committed_account(account.id())? (see Step 8 above and "Multi-Transaction Test Pattern" below). For block advancement and reference-block semantics, see "MockChain Block Numbering" below.

End-to-end multi-note example: see miden-bank withdraw_test.rs for seeding deposit + withdraw-request notes via add_output_note(RawOutputNote::Full(...)) before builder.build(), then consuming the withdraw-request note and asserting an expected P2ID output note via extend_expected_output_notes(...) plus prove_next_block(). See miden-bank deposit_test.rs for the simpler single-note consume + prove cycle.

Multi-Transaction Test Pattern

For contracts requiring initialization before use, each step usually needs its own execute() → add_pending_executed_transaction() → prove_next_block() cycle. Fetch the committed account or note state from mock_chain between steps before building the next context.

Call account.apply_delta(&executed.account_delta())? after each execute() to keep the in-memory Account variable in sync with the chain whenever later steps reuse it (for build_tx_context(...), asserting account state directly, etc.). The miden-bank tutorial tests follow this pattern between every execute() and prove_next_block(). If the test only reads final state via mock_chain.committed_account(...) after the last prove_next_block() and never reuses the in-memory variable, apply_delta is unnecessary; see counter_test.rs.

See miden-bank withdraw_test.rs for a complete multi-transaction test demonstrating: initialize bank → deposit assets → withdraw assets (3 sequential transactions with state verification between each step).

See miden-bank deposit_test.rs for an end-to-end asset-bearing note test.

MockChain Block Numbering

Genesis is block 0. Each prove_next_block() advances the block number by 1. In contract code, tx::get_block_number() returns the reference block: the last proven block at the time the transaction started, not the block the transaction will be included in.

Note Construction

Prefer NoteBuilder (or mirror its logic with compiled .masp package files) for creating notes in tests. Start from NoteBuilder::new(sender.id(), &mut note_rng), then configure .package(...), optional .add_assets(...), optional .note_storage(...), and finally .build(). See counter_test.rs for the working pattern.

Building Notes from .masp Packages

When a test or binary needs full control over the note (custom storage Felts, deterministic serial number, P2ID-style metadata, or a real-client publish + consume flow), build directly from a compiled .masp package. The canonical pipeline is NoteScript::from_package(package.as_ref()) paired with NoteBuilder::new(sender_id, &mut RandomCoin::new(note_script.root())).package((*package).clone()).note_type(...).tag(...).add_assets(...).note_storage(...).serial_number(...).build(). Project-template's own counter_test.rs follows this same shape with NoteBuilder directly.

The miden-bank tutorial codifies this as two helpers built on top of NoteScript::from_package + NoteBuilder:

• Real-client path (create_note_from_package): calls client.rng().draw_word() and threads it through NoteBuilder::serial_number(...) for a fresh per-note serial. Used when the note will be published via a real TransactionRequestBuilder. See miden-bank helpers.rs (create_note_from_package).
• Deterministic test path (create_testing_note_from_package): omits serial_number(...), letting NoteBuilder derive the serial deterministically from RandomCoin::new(note_script.root()). Used when seeding MockChainBuilder with a freshly-built note. See miden-bank helpers.rs (create_testing_note_from_package).

Both helpers take a NoteCreationConfig with four fields: note_type: NoteType, tag: NoteTag, assets: NoteAssets, storage: Vec<Felt>. See miden-bank helpers.rs (NoteCreationConfig struct + Default impl). To drive a cross-component note (see rust-sdk-patterns "Cross-Component Note Pattern"), populate NoteCreationConfig.storage with the serialized Felt representation of the typed note struct's fields in declaration order; the #[note] macro deserializes that slice into self before the script runs.

Test-side example: see miden-bank withdraw_test.rs for a storage vector reaching the note via NoteCreationConfig { storage, ..Default::default() } and the seeded MockChainBuilder.add_output_note(RawOutputNote::Full(...)) call before builder.build().

Binary-side example: see miden-bank deposit.rs for build_project_in_dir(...) to produce the .masp package, create_note_from_package(...) to assemble the note, then TransactionRequestBuilder::own_output_notes(vec![note.clone()]) and input_notes([(note.clone(), None)]) to publish and consume. For the surrounding client setup (CLI side), see the miden-client-cli skill.

Asset-Bearing Note Example

To create a note that carries fungible assets in tests:

1. Create a FungibleAsset from a faucet ID and amount.
2. Seed a RandomCoin from NoteScript::from_package(note_package.as_ref())?.root().
3. Pass the asset into NoteBuilder::add_assets(...) and any note inputs into note_storage(...).
4. Finish with .package((*note_package).clone()).build()?.

The faucet must be set up first (see Step 3) and the sender wallet must hold sufficient assets (see Step 2).

Key Dependencies

See integration/Cargo.toml for the current dependency versions used in this project.

Validation Checklist

• Test function is async and uses #[tokio::test]
• Storage slot names follow package_or_name::component_struct::field_name pattern
• All contracts built before account/note creation
• Account storage seeded via InitStorageData
• prove_next_block() called after add_pending_executed_transaction()
• Post-block assertions read state from mock_chain.committed_account(...) or other committed chain views
• Notes added to MockChainBuilder via add_output_note(RawOutputNote::Full(...)) before build()
• Faucet set up before creating assets

Source: 0xMiden/project-template — distributed by TomeVault.