Steadfastasart Geoscience Skills Simpeg

SimPEG - Geophysical Simulation & Inversion

Quick Reference

from discretize import TensorMesh
from simpeg.electromagnetics.static import resistivity as dc
from simpeg import maps, data_misfit, regularization, optimization
from simpeg import inverse_problem, inversion, directives
import numpy as np

# Create mesh
hx, hz = np.ones(100) * 10, np.ones(50) * 5
mesh = TensorMesh([hx, hz], origin='CN')

# Forward model
simulation = dc.Simulation2DNodal(mesh, survey=survey, sigmaMap=maps.ExpMap(mesh))
dpred = simulation.dpred(model)

# Inversion
dmis = data_misfit.L2DataMisfit(data=data, simulation=simulation)
reg = regularization.WeightedLeastSquares(mesh)
opt = optimization.InexactGaussNewton(maxIter=20)
inv_prob = inverse_problem.BaseInvProblem(dmis, reg, opt)
inv = inversion.BaseInversion(inv_prob, directiveList=[...])
mrec = inv.run(m0)

Key Classes

Essential Operations

Create Mesh

from discretize import TensorMesh

# 2D mesh (x, z) - centered in x, top at z=0
hx, hz = np.ones(100) * 20, np.ones(50) * 10
mesh = TensorMesh([hx, hz], origin='CN')

# 3D mesh
mesh = TensorMesh([np.ones(50)*25, np.ones(50)*25, np.ones(30)*10], origin='CCN')

DC Resistivity Survey

from simpeg.electromagnetics.static import resistivity as dc

elec_locs = np.c_[np.linspace(-95, 95, 20), np.zeros(20)]
source_list = []
for i in range(17):  # dipole-dipole
    rx = dc.receivers.Dipole(elec_locs[[i+2]], elec_locs[[i+3]])
    src = dc.sources.Dipole([rx], elec_locs[i], elec_locs[i+1])
    source_list.append(src)
survey = dc.Survey(source_list)

Forward Model

model = np.ones(mesh.nC) * 100  # 100 ohm-m
simulation = dc.Simulation2DNodal(mesh, survey=survey, sigmaMap=maps.ExpMap(mesh))
dpred = simulation.dpred(np.log(1/model))  # input: log(conductivity)

Inversion

from simpeg import data_misfit, regularization, optimization
from simpeg import inverse_problem, inversion, directives, data

obs_data = data.Data(survey, dobs=dobs, standard_deviation=0.05*np.abs(dobs))
dmis = data_misfit.L2DataMisfit(data=obs_data, simulation=simulation)
reg = regularization.WeightedLeastSquares(mesh, alpha_s=1e-4, alpha_x=1, alpha_z=1)
opt = optimization.InexactGaussNewton(maxIter=20)
inv_prob = inverse_problem.BaseInvProblem(dmis, reg, opt)
dir_list = [directives.BetaSchedule(coolingFactor=2), directives.TargetMisfit()]
inv = inversion.BaseInversion(inv_prob, directiveList=dir_list)
mrec = inv.run(m0)

Common Maps

Physical Property Ranges

When to Use vs Alternatives

Choose SimPEG when: You need a unified framework for multiple geophysical methods, custom forward operators, or research-grade flexibility. Its modular design (mesh + survey + simulation + inversion) suits complex and non-standard problems.

Avoid SimPEG when: You only need standard ERT inversion (pyGIMLi is faster to set up), or you need a turnkey commercial solution.

Common Workflows

Run DC resistivity inversion from survey data

• Define electrode locations and build dipole-dipole (or other) survey geometry
• Create TensorMesh or TreeMesh with appropriate cell sizes
• Set up dc.Simulation2DNodal with mesh, survey, and ExpMap
• Load observed data into data.Data with standard deviations
• Configure L2DataMisfit, WeightedLeastSquares regularization, and optimizer
• Set directives: BetaSchedule, TargetMisfit
• Build BaseInvProblem and BaseInversion
• Run inversion with inv.run(m0) using a homogeneous starting model
• Plot recovered model and compare observed vs predicted data
• Check data misfit convergence (target chi-squared ~ 1)

Tips

1. Use log parameters for positive quantities (resistivity, susceptibility)
2. Start with coarse mesh and refine after initial tests
3. Check data fit by plotting observed vs predicted
4. Tune regularization to balance data fit and model smoothness
5. Use TreeMesh for 3D problems to improve efficiency

References

• Survey Types - Survey configurations and receiver types
• Mesh Types - Mesh discretization and refinement

Scripts

• scripts/dc_inversion.py - Complete DC resistivity inversion example

Converted and distributed by TomeVault — claim your Tome and manage your conversions.