Surge Configuration

Surge Configuration Assistant

Documentation Priority

When answering Surge questions, always follow this source priority:

1. Release Log (appcast): Most up-to-date, overrides others on conflicts
   • https://nssurge.com/mac/latest/appcast-signed-beta.xml
2. Surge Manual (authoritative reference): Exact option definitions
   • https://manual.nssurge.com/ | LLM: https://manual.nssurge.com/llms.txt
3. Surge Knowledge Base (guides & FAQs): Tutorials, troubleshooting, best practices
   • https://kb.nssurge.com/surge-knowledge-base/zh | LLM: https://kb.nssurge.com/llms.txt

Always use Context7 MCP tools to fetch latest docs when generating config or setup steps.

Profile Structure

Surge config is INI format with [Section] segments:

[General]        # Global settings (key = value)
[Ponte]          # Surge Ponte private network
[Proxy]          # Proxy server definitions
[Proxy Group]    # Policy groups (select, smart, fallback, url-test, subnet, load-balance)
[Rule]           # Traffic routing rules (ORDER MATTERS)
[Host]           # Local DNS mapping
[URL Rewrite]    # URL rewrite rules
[Header Rewrite] # Header modification
[Map Local]      # Mock local responses
[SSID Setting]   # Per-network settings
[MITM]           # HTTPS decryption config
[WireGuard xxx]  # WireGuard interface definitions

Detached Profile (Config Separation)

Use #!include to split config into modules:

[Proxy]
#!include config/proxy-cloud.dconf, config/proxy-home.dconf

[Rule]
#!include config/vpn.dconf, surge.conf

• #!include cannot be mixed with regular content: If a section uses #!include, it can only contain #!include directives (and comments), and cannot contain regular rule/definition lines at the same time. If additional content needs to be added, it should be placed in the referenced dconf file.
• Referenced file MUST contain corresponding [Section] declaration
• Suffix convention: .conf for complete configs, .dconf for partial segments
• One level of include only (no nested includes)
• Multiple includes in one section → section becomes read-only in UI
• Can include managed profile URLs directly (Linked Profile, Mac 6.0+)

Key Policy Groups

Smart Group (Recommended over url-test/fallback)

Proxy = smart, ProxyA, ProxyB, ProxyC, interval=600, timeout=5

• Real-time dynamic optimization with per-site tuning
• Adaptive retry: failover mid-connection without user noticing
• Weight tuning: policy-priority="Premium:0.9;SG:1.3" (<1 = higher priority)
• Cannot use other groups as sub-policies
• Cannot handle geo-lock detection
• Snell reuse conflict resolved in Mac 6.0+

Subnet Group

VPN跳板 = subnet, default = Home, "SSID:MyWiFi" = DIRECT, "ROUTER:192.168.2.1" = DIRECT

Auto-switch based on network environment. Match types: SSID:, BSSID:, ROUTER:, TYPE: (CELLULAR/WIFI/WIRED), DEVICE-NAME:.

Fallback / URL-Test

可用切换 = fallback, ProxyA, ProxyB, interval=600, timeout=5
自动测速 = url-test, ProxyA, ProxyB, interval=600, tolerance=100, timeout=5

• tolerance (url-test only, default 100ms): prevents unnecessary switching
• evaluate-before-use=true: block requests until first test completes
• Error classification (A-E) determines auto-retest triggers

Rule Writing Best Practices

Rules are matched top-to-bottom. First match wins.

[Rule]
# Domain rules first (no DNS needed)
DOMAIN-SUFFIX,google.com,Proxy
DOMAIN,specific.example.com,DIRECT

# Then IP rules (trigger DNS resolution)
IP-CIDR,192.168.0.0/16,DIRECT,no-resolve
GEOIP,CN,DIRECT

# Final catch-all
FINAL,Proxy,dns-failed

Key principles:

1. Put non-DNS rules before DNS-triggering rules to avoid unnecessary resolution
2. Add no-resolve to IP rules when possible to skip DNS
3. Use dns-failed on FINAL with proxy policy to handle DNS failures gracefully
4. Use extended-matching for rules that should also match via SNI/Host sniffing

Accessing home network from outside:

# Only route home network when NOT at home
AND,((NOT,((SUBNET,ROUTER:192.168.2.1))), (IP-CIDR,192.168.2.0/24,no-resolve)),Home

DNS Configuration

General DNS setup:

[General]
dns-server = 223.5.5.5, 114.114.114.114           # Traditional DNS
encrypted-dns-server = tls://223.5.5.5             # DoT/DoH
hijack-dns = 8.8.8.8:53, 8.8.4.4:53               # Hijack hardcoded DNS
always-real-ip = *.srv.nintendo.net, *.stun.playstation.net  # Preserve NAT type

DNS resolution flow:

• Surge triggers local DNS only for: IP-type rules (without no-resolve), proxy server hostname, DIRECT policy
• With proxy policy, DNS resolves on proxy server side (optimal)
• use-local-host-item-for-proxy = true: use local Host mapping for proxy connections

Per-network DNS (SSID Setting):

[SSID Setting]
SSID:HomeWiFi dns-server="192.168.2.1", encrypted-dns-server="off"

Gateway Mode (Mac as Router)

Two modes:

1. Enhanced Mode (Surge VIF): Also handles local device traffic
2. Surge VM Gateway (Mac 6.0+): Better performance, Layer 2, but conflicts with VM bridging

Client setup:

• Gateway: Surge Mac's IP (or VM Gateway IP)
• DNS: 198.18.0.2 (IPv4) / fd00:6152::2 (IPv6)

DHCP auto-config:

• Disable router's DHCP first
• Surge Mac must use wired connection + static IP
• IPv6 RA Override for complete IPv6 takeover

Performance notes:

• P2P apps can overwhelm Surge (works at L7, not L3)
• VM UDP Fast Path: auto-activates for UDP-heavy clients (≥10/1s or ≥30/10s)
• PS Portal workaround: IP-CIDR,<PS5-IP>/32,REJECT-DROP,pre-matching,no-resolve

Surge Ponte (Private Network)

Server setup (Mac):

[Ponte]
server-proxy-name = ProxyForNAT  # or omit for direct NAT traversal

Client usage:

[Ponte]
server-proxy-name = "🏡 Home"     # As Ponte server
# OR
client-proxy-name = Home           # As Ponte client only

Access patterns:

• Domain: ponte-name.sgponte (e.g., mymacmini.sgponte:8080)
• Policy: DEVICE:PONTE-NAME as proxy to use that device as gateway
• Rule: IP-CIDR,192.168.30.0/24,DEVICE:MyMacMini

Requirements:

• Same iCloud account across devices
• Full Cone NAT (A-type) for direct traversal, or use proxy for NAT traversal
• Mac 6.0+: Multiple channels, IPv6 direct, auto-select fastest

REJECT Policies

Auto-upgrade: 10+ REJECTs in 30s → automatically becomes REJECT-DROP.

MITM Configuration

[MITM]
skip-server-cert-verify = true
tcp-connection = true
h2 = true                    # Enable HTTP/2 for MITM
hostname = *.example.com     # Domains to decrypt
hostname-disabled = ...      # Temporarily disabled domains

• SSL Pinning apps (Apple, Facebook, Instagram, X) cannot be MITM'd
• iOS 15+: UA not visible in CONNECT requests without MITM

Proxy Provider Integration

Three modes:

1. Managed profile: Full config from provider (read-only)
2. Linked profile: Track [Proxy] + [Proxy Group] from managed, edit rest locally
3. External policy group (recommended for advanced users):

Provider = select, policy-path=https://airport.com/surge.conf, hidden=true
US-Nodes = smart, include-other-group=Provider, policy-regex-filter=US|美国

Multi-provider fusion:

Awesome = select, policy-path=https://a.com/surge.conf, hidden=true, external-policy-name-prefix=A-
Fantastic = select, policy-path=https://b.com/surge.conf, hidden=true, external-policy-name-prefix=B-
All-US = smart, include-other-group="Awesome,Fantastic", policy-regex-filter=US|美国

Relay (chain proxy):

Provider = select, policy-path=https://provider.com/surge.conf, external-policy-modifier="underlying-proxy=JumpProxy"

Snell v5 Protocol

• Dynamic Record Sizing: better latency under packet loss
• QUIC Proxy Mode: UDP-over-UDP for QUIC traffic (avoids TCP-over-UDP issues)
• Shadow TLS v3 support
• Server download: check KB release notes

Proxy = snell, server.com, 8443, psk=xxx, version=5, reuse=true, tfo=true, shadow-tls-password=xxx, shadow-tls-sni=www.microsoft.com, shadow-tls-version=3

Troubleshooting Quick Reference

Additional Resources

• For complete option reference, fetch: https://manual.nssurge.com/llms.txt
• For KB guides and FAQs, fetch: https://kb.nssurge.com/llms.txt
• For latest changes, fetch: https://nssurge.com/mac/latest/appcast-signed-beta.xml

Converted and distributed by TomeVault — claim your Tome and manage your conversions.