Understanding Lua Libraries

SmartThings Edge Driver Lua Library Architecture

1. Driver Initialization and Run Loop

A driver is created by calling Driver("name", template) (or a protocol-specific variant like ZigbeeDriver("name", template)). The template is a Lua table containing handler tables and configuration.

The base Driver.init (in lua_libs/st/driver.lua) does the following:

• Sets out_driver.NAME from the name argument
• Initializes handler tables: capability_handlers, lifecycle_handlers, message_handlers
• Opens communication channels via cosock sockets: capability_channel, environment_channel, lifecycle_channel, driver_lifecycle_channel, and optionally discovery_channel
• Initializes a datastore and device cache tables
• Calls Driver.standardize_sub_drivers() to normalize the sub_drivers list
• Builds the lifecycle_dispatcher and capability_dispatcher from handlers + sub_drivers
• Registers channel handlers so inbound messages get routed to the correct handler function

The driver:run() call starts the cosock event loop, which runs forever processing messages from all registered channels.

2. Message Dispatchers

The dispatcher system (lua_libs/st/dispatcher.lua) is a hierarchical message routing tree. The base class MessageDispatcher provides:

• default_handlers - handlers at this level of the hierarchy.
• child_dispatchers - sub-dispatchers (from sub_drivers) that may override defaults
• can_handle(driver, device, ...) - returns true if this dispatcher or a child can handle the message
• dispatch(driver, device, ...) - finds and executes the matching handler

Dispatch logic

1. The dispatcher calls can_handle on each child dispatcher
2. If any children can handle: only the children handle it (parent defaults are NOT called)
3. If multiple children match: ALL matching children receive the message
4. If NO children match: parent defaults are used
5. This is recursive -- sub-drivers can have sub-drivers

Dispatcher types

Each protocol-specific driver (ZigbeeDriver, ZwaveDriver, MatterDriver) adds its own dispatcher on top of the base Driver's capability and lifecycle dispatchers.

Zigbee handler structure:

zigbee_handlers = {
  attr = {    -- attribute reports / read responses
    [ClusterID] = {
      [AttributeID] = handler_function,
    }
  },
  global = {  -- global ZCL commands
    [ClusterID] = {
      [CommandID] = handler_function,
    }
  },
  cluster = { -- cluster-specific commands
    [ClusterID] = {
      [CommandID] = handler_function,
    }
  },
  zdo = {     -- ZDO commands
    [ClusterID] = handler_function,
  }
}

Z-Wave handler structure:

zwave_handlers = {
  [cc.SWITCH_BINARY] = {          -- command class
    [SwitchBinary.REPORT] = handler_function,  -- command ID
  },
}

Matter handler structure:

matter_handlers = {
  attr = {
    [ClusterID] = {
      [AttributeID] = handler_function,
    }
  },
  cmd_response = { ... },
  event = { ... },
  fallback = handler_function,
}

Capability handler structure:

capability_handlers = {
  [capabilities.switch.ID] = {
    [capabilities.switch.commands.on.NAME] = handle_on,
    [capabilities.switch.commands.off.NAME] = handle_off,
  },
  [capabilities.switchLevel.ID] = {
    [capabilities.switchLevel.commands.setLevel.NAME] = handle_set_level,
  },
}

3. Sub-Drivers Pattern

Sub-drivers allow device-specific behavior overrides gated by a can_handle function. A sub-driver is a table with:

• NAME (string)
• can_handle(opts, driver, device, ...) -> boolean
• Protocol handlers (zigbee_handlers, zwave_handlers, matter_handlers)
• capability_handlers, lifecycle_handlers
• Optional nested sub_drivers

In practice, sub-drivers are often organized as separate files under src/sub_drivers/ for clarity, and required in the main driver template.

Dispatch Logic

1. The dispatcher calls can_handle on each child dispatcher
2. If any children can handle: only the children handle it (parent defaults are NOT called)
3. If multiple children match: ALL matching children receive the message
4. If NO children match: parent defaults are used
5. This is recursive -- sub-drivers can have sub-drivers

Lazy Loading

Sub-drivers support lazy loading for memory optimization:

• Driver.lazy_load_sub_driver(sub_driver): Strips handlers, keeps only can_handle and NAME
• Driver.lazy_load_sub_driver_v2(require_path): Even more efficient; only requires can_handle and sub_drivers modules separately
• A sub-driver with no handlers defined is automatically treated as lazy-loadable

New sub-drivers must be:

1. Listed in the parent's sub_drivers.lua (or the equivalent sub_drivers table)
2. Have a can_handle.lua that correctly identifies the target devices
3. Have an init.lua that returns the sub-driver table

If any of these are missing, the sub-driver will not be loaded.

4. Lifecycle Events

Device lifecycle events are dispatched through the DeviceLifecycleDispatcher. The key events:

1. init -- Called for every device on driver startup (existing devices) and after added for new devices. Used for setting up component/endpoint mappings and device fields.
2. added -- Called only when a device is first paired. NOT called for existing devices when a driver is updated. After added, a synthetic init is automatically dispatched.
3. doConfigure -- Called when the device needs configuration (typically after pairing).
4. infoChanged -- Called when device metadata changes (e.g., preferences updated). Receives args.old_st_store for comparison.
5. removed -- Called when device is removed.
6. driverSwitched -- Called when device switches to this driver.

Register lifecycle handlers in the template:

lifecycle_handlers = {
  init = device_init,
  added = device_added,
  removed = device_removed,
  doConfigure = device_do_configure,
  infoChanged = info_changed_handler,
}

Handler signature: function(driver, device, event, args)

Default behaviors provided by the framework:

• driverSwitched: Base Driver marks device as NONFUNCTIONAL. ZigbeeDriver overrides this to check capability matching and marks as PROVISIONED if all capabilities match.
• doConfigure: ZigbeeDriver defaults to device_management.configure which sends attribute reporting configuration.
• added: After a successful added callback, the framework automatically queues a synthetic init event.
• doConfigure: After success, the framework transitions the device to PROVISIONED state.
• Unhandled lifecycle events log a trace message and are otherwise ignored (fallback handler).

Critical timing knowledge for lifecycle events

1. init on driver startup. After hub restart the radio may not be ready and sending Zigbee/Z-Wave commands in init can fail.
2. added is NOT called for existing devices on driver update. Only called on first pair. Code that must run for existing devices should go in init (for non-radio operations) or use driverSwitched.
3. doConfigure is called any time a device is added with the TYPED provisioning state and is the right place for device-specific configuration commands.
4. infoChanged receives args.old_st_store for comparing old vs new preferences. Drivers should check if a preference actually changed before acting on it.

5. Key Imports and Require Paths

-- Base driver (for virtual/LAN devices)
local Driver = require "st.driver"

-- Protocol-specific drivers
local ZigbeeDriver = require "st.zigbee"
local ZwaveDriver = require "st.zwave.driver"
local MatterDriver = require "st.matter.driver"

-- Capabilities
local capabilities = require "st.capabilities"

-- Zigbee defaults (pre-built handlers for common capabilities)
local defaults = require "st.zigbee.defaults"

-- Zigbee clusters (for building commands/reading attributes)
local zcl_clusters = require "st.zigbee.zcl"

-- Z-Wave command classes
local cc = require "st.zwave.CommandClass"
local SwitchBinary = require "st.zwave.CommandClass.SwitchBinary"

-- Matter clusters
local clusters = require "st.matter.clusters"

-- Utilities
local utils = require "st.utils"
local json = require "st.json"
local log = require "log"

-- Coroutine runtime
local cosock = require "cosock"

-- LAN utils
local socket = cosock.socket
local luncheon = require "luncheon"
local luxure = require "luxure"
local lustre = require "lustre"

Zigbee driver example (from zigbee-switch)

local capabilities = require "st.capabilities"
local ZigbeeDriver = require "st.zigbee"
local defaults = require "st.zigbee.defaults"

local template = {
  supported_capabilities = {
    capabilities.switch,
    capabilities.switchLevel,
    capabilities.colorControl,
    capabilities.colorTemperature,
  },
  sub_drivers = require("sub_drivers"),
  lifecycle_handlers = {
    init = device_init,
    added = device_added,
  },
}

-- Register default Zigbee handlers for all supported capabilities
defaults.register_for_default_handlers(template,
  template.supported_capabilities,
  {native_capability_cmds_enabled = true, native_capability_attrs_enabled = true}
)

local driver = ZigbeeDriver("zigbee_switch", template)
driver:run()

This pattern - declare supported capabilities, register defaults, add overrides via sub_drivers and lifecycle_handlers, then construct and run - is the standard structure for all protocol-based Edge drivers.

6. Default Handlers and Protocol-Specific Default Functionality

When a driver declares supported_capabilities in its template, the framework automatically registers default handlers for each capability. The registration uses or-merge logic: driver-defined handlers always take precedence over defaults. If the driver already registered a handler for a given cluster/attribute/command slot, the default is silently skipped.

Registration happens in st.{zigbee,zwave,matter}.defaults.init.lua via register_for_default_handlers(driver, capabilities, opts):

1. Iterates supported_capabilities
2. For each capability, requires the corresponding defaults module
3. Merges zigbee_handlers, zwave_handlers, or matter_handlers (only where driver hasn't defined one)
4. Also merges attribute_configurations (Zigbee), get_refresh_commands (Z-Wave), or subscribed_attributes (Matter)

Zigbee specific default functionality

The default doConfigure handler (device_management.configure):

1. Sends a refresh command (reads all configured attributes)
2. Calls device:configure() which iterates all configured attributes and for each:
   • Sends a ZDO Bind Request
   • Sends a Configure Reporting command with the attribute's min/max interval, data type, and reportable change
3. Also handles IAS Zone enrollment if the device supports cluster 0x0500

Z-Wave specific default functionality

doConfigure calls device:default_configure() which calls device:refresh(). The default refresh iterates get_refresh_commands from all default capability modules and sends Get commands for each supported CC. Refresh collects get_refresh_commands from all default modules, sends Get commands

Matter specific default functionality

TODO

7. Unit Test Framework

Load the testing-edge-drivers skill for details on the built in unit test framework for to test Zigbee, Z-Wave, and Matter drivers.

Source: SmartThingsCommunity/SmartThingsEdgeDrivers — distributed by TomeVault.