How do I install the Web Test skill?

Run npx get-skill add tomevault-io/web-test in your terminal (requires Node.js), paste this page's agent-chat prompt into Claude, Cursor, or any MCP-connected agent, or download the SKILL.md file and copy it into your agent's skills directory.

What does the Web Test skill do?

Execute tests from persistent test cases. Reads ./tests/ directory, runs cleanup, wallet setup (if Web3), executes tests, and generates report. Use when this capability is needed. It is listed under AI & ML on SkillMD.

Is Web Test safe to use?

This skill has not completed SkillMD's automated safety review yet. Independent scanners report: SkillSpector: CAUTION, Skill Scanner: PASS. SkillMD never runs a skill's scripts for you; review the SKILL.md before installing.

Which AI agents work with Web Test?

This skill is tagged as working with Claude Code, Claude.ai, OpenAI Codex. SKILL.md is an open format, so most agents that read a skills directory can load it too.

Is Web Test free to use?

Yes. Installing skills from SkillMD is free, and the skill stays under its author's original license.

Who published Web Test?

tomevault-io (@tomevault-io) published this skill. Their other Agent Skills are listed on their SkillMD profile.

Web Test by tomevault-io — Agent Skill

Name: Web Test
Author: tomevault-io

Web Test Execution

Execute tests from persistent test cases in ./tests/ directory.

CRITICAL RULES - READ FIRST

Rule 1: Wallet Setup Based on config.yaml

┌────────────────────────────────────────────────────────────────┐
│  IF config.yaml contains:                                      │
│                                                                │
│    web3:                                                       │
│      enabled: true                                             │
│                                                                │
│  THEN at TEST START (before any test cases):                   │
│                                                                │
│    1. skill web-test-wallet-setup    ← REQUIRED AT START!      │
│                                                                │
│  Wallet CONNECT is handled by test cases:                      │
│                                                                │
│    2. WALLET-001 test case          ← Is a TEST CASE           │
│       (uses web-test-wallet-connect internally)                │
│                                                                │
│  ❌ DO NOT skip wallet-setup for Web3 DApps                    │
│  ❌ DO NOT auto-run wallet-connect (it's a test case now)      │
│  ✅ Run wallet-setup ONCE at start if web3.enabled: true       │
│  ✅ Run WALLET-001 test when reached in execution_order        │
└────────────────────────────────────────────────────────────────┘

Why this matters:

Wallet setup prepares the extension (download, import key)
Wallet connect is now a testable feature (WALLET-001)
Other tests depend on WALLET-001 via preconditions

Rule 2: NEVER Skip Tests Due to Time Constraints

╔════════════════════════════════════════════════════════════════╗
║                    ⛔ CRITICAL RULE ⛔                          ║
╠════════════════════════════════════════════════════════════════╣
║                                                                ║
║  This is AUTOMATED TESTING - user does NOT care about time!    ║
║  Run ALL tests, no matter how long it takes.                   ║
║                                                                ║
║  ❌ FORBIDDEN - These excuses are NOT allowed:                 ║
║     - "Time constraints"                                       ║
║     - "To save time"                                           ║
║     - "Already running too long"                               ║
║     - "Similar to another test"                                ║
║     - "Will test later"                                        ║
║     - "Not enough time"                                        ║
║                                                                ║
║  ✅ VALID reasons to skip a test:                              ║
║     - User requested specific tests (see Selective Execution)  ║
║       Example: "Run only SWAP-001" → skip other tests          ║
║     - User requested specific module/feature                   ║
║       Example: "Run wallet module" → skip non-wallet tests     ║
║     - Blocking dependency failed (depends_on test failed)      ║
║     - Feature does not exist in the project                    ║
║     - Test case is explicitly deprecated                       ║
║                                                                ║
║  ⚠️  IF YOU SKIP A TEST FOR "TIME CONSTRAINTS":                ║
║      → The test run is considered INCOMPLETE                   ║
║      → User will NOT accept the results                        ║
║      → You MUST re-run the skipped tests                       ║
║                                                                ║
╚════════════════════════════════════════════════════════════════╝

Why this matters:

This is AUTOMATED testing - the user does NOT care how long it takes
Users explicitly want ALL test cases executed, regardless of time
Every test case exists for a reason - skipping means missing bugs
Skipping tests defeats the entire purpose of testing
"Time constraints" is YOUR concern, not the user's - they want completeness
If a test takes too long, WAIT for it - the user expects this
If a test is truly unnecessary, the user will REMOVE it from the test suite

Rule 3: Follow Execution Order

Always execute in this exact order:

Check for test cases
web-test-cleanup - Clean previous session
Read config.yaml
web-test-wallet-setup - (if web3.enabled: true) - Run ONCE at start
Execute test cases (including WALLET-001 which connects wallet)
web-test-report - Generate report
web-test-cleanup --keep-data - Final cleanup

Note: web-test-wallet-connect is no longer called directly by this skill. It is invoked when executing WALLET-001 test case or as a precondition check.

Rule 4: Timeout Rules - FAIL FAST

╔════════════════════════════════════════════════════════════════╗
║  TIMEOUT RULES - MAXIMUM 30 SECONDS FOR ANY OPERATION          ║
╠════════════════════════════════════════════════════════════════╣
║                                                                ║
║  All operations MUST complete within 30 seconds:               ║
║                                                                ║
║  | Operation              | Timeout | On Timeout              ║
║  |------------------------|---------|-------------------------|
║  | Button click response  | 30s     | FAIL test               |
║  | Form submission        | 30s     | FAIL test               |
║  | Page navigation        | 30s     | FAIL test               |
║  | API request            | 30s     | FAIL test               |
║  | Wallet popup appear    | 30s     | FAIL test               |
║  | Element visibility     | 30s     | FAIL test               |
║                                                                ║
║  ❌ DO NOT use long wait times:                                ║
║     - wait: 10000  ← TOO LONG, use 3000 max                   ║
║     - wait: 5000   ← Consider reducing to 2000                ║
║                                                                ║
║  ✅ Recommended wait times:                                    ║
║     - After click: 1000-2000ms                                 ║
║     - After form submit: 2000-3000ms                           ║
║     - After page navigate: 2000-3000ms                         ║
║     - For API response: 3000ms (then check, retry if needed)   ║
║                                                                ║
║  ⚠️  If operation exceeds 30s → Mark test as FAILED           ║
║      Record: "Timeout: {operation} exceeded 30s"               ║
║                                                                ║
╚════════════════════════════════════════════════════════════════╝

Timeout Configuration:

# Global timeout settings (apply to all tests)
timeouts:
  action: 30000 # Max time for any single action (30s)
  page_load: 30000 # Max time for page to load (30s)
  api_request: 30000 # Max time for API response (30s)
  wallet_popup: 30000 # Max time for wallet popup (30s)

# Recommended wait times in test steps
wait_times:
  after_click: 1000 # 1 second
  after_type: 500 # 0.5 seconds
  after_submit: 2000 # 2 seconds
  after_navigate: 2000 # 2 seconds
  for_animation: 500 # 0.5 seconds
  for_api: 3000 # 3 seconds (then verify)

Rule 5: FIX TEST CASES DURING EXECUTION

╔════════════════════════════════════════════════════════════════╗
║          ✅ IMPROVE TEST CASES AS YOU RUN THEM                 ║
╠════════════════════════════════════════════════════════════════╣
║                                                                ║
║  Test cases from web-test-case-gen are NOT perfect!            ║
║  Human review may also miss issues.                            ║
║                                                                ║
║  WHEN TO MODIFY a test case during execution:                  ║
║                                                                ║
║  1. Step targets incorrect element                             ║
║     - click target selector doesn't match UI                   ║
║     - Selector points to wrong or non-existent element         ║
║                                                                ║
║  2. Steps are missing or in wrong order                        ║
║     - Need to add intermediate steps (e.g., close modal first) ║
║     - Steps should be reordered for correct flow               ║
║                                                                ║
║  3. Expected results are incorrect or incomplete               ║
║     - Expected text doesn't match actual UI text               ║
║     - Missing important verification points                    ║
║                                                                ║
║  4. Wait times are insufficient                                ║
║     - Page needs more time to load/update                      ║
║     - Animation takes longer than expected                     ║
║                                                                ║
║  5. Preconditions or dependencies are wrong                    ║
║     - Test should depend on another test                       ║
║     - Precondition is missing or incorrect                     ║
║                                                                ║
║  HOW TO MODIFY:                                                ║
║                                                                ║
║  1. Pause test execution                                       ║
║  2. Edit ./tests/test-cases.yaml directly                      ║
║  3. Resume/retry the test with fixed steps                     ║
║                                                                ║
║  ✅ ENCOURAGED actions:                                        ║
║     - Fix obvious typos or selector errors                     ║
║     - Add missing wait steps                                   ║
║     - Correct expected result descriptions                     ║
║     - Add missing intermediate steps                           ║
║                                                                ║
║                                                                ║
╚════════════════════════════════════════════════════════════════╝

Example: Fixing a test case mid-execution

During TEST: SWAP-001

Problem detected:
  Step 3: click "Swap Now"
  Error: Button text is actually "Execute Swap" not "Swap Now"

Action taken:
  1. Edit ./tests/test-cases.yaml
  2. Change step target:
     - target: Swap Now button
     + target: Execute Swap button
  3. Retry SWAP-001 from step 3

Result: Test now passes ✅

Rule 6: SEQUENTIAL EXECUTION ONLY - ONE TEST AT A TIME

╔════════════════════════════════════════════════════════════════╗
║            ⛔ CRITICAL: NO PARALLEL TEST EXECUTION ⛔           ║
╠════════════════════════════════════════════════════════════════╣
║                                                                ║
║  1. Execute ONLY ONE test case at a time                       ║
║  2. WAIT for current test to FULLY COMPLETE before next        ║
║  3. NEVER run multiple tests in parallel                       ║
║                                                                ║
║  ❌ FORBIDDEN:                                                 ║
║     - Running 2+ tests simultaneously                          ║
║     - Starting next test before screenshots captured           ║
║     - Using parallel Task agents for different tests           ║
║                                                                ║
║  ✅ REQUIRED:                                                  ║
║     - Complete test → capture screenshots → record result      ║
║     - Only then start next test                                ║
║     - Respect depends_on order from test-cases.yaml            ║
║                                                                ║
║  WHY: Parallel tests cause:                                    ║
║     - Screenshot conflicts (wrong page captured)               ║
║     - Browser state corruption                                 ║
║     - Wallet popup handling failures                           ║
║     - Unpredictable test results                               ║
║                                                                ║
╚════════════════════════════════════════════════════════════════╝

Prerequisites

Test cases must exist in ./tests/ directory.

If no test cases found, this skill will:

Prompt: "No test cases found. Run skill web-test-case-gen to generate them?"
Wait up to 2 minutes for user response
If timeout or user declines → Exit with failure

Quick Start

Run the tests for this project

Selective Test Execution

Users can request to run specific tests instead of all tests. This is the ONLY valid reason to skip tests.

Execution Modes

Mode	User Request Example	What to Execute
All Tests	"Run all tests"	All tests in `execution_order`
By Module	"Run wallet module" / "Run swap module tests"	Tests where `module` matches
By Feature	"Run Wallet tests" / "Test the swap feature"	Tests where `feature` matches
By Priority/Type	"Run negative tests" / "Run critical tests"	Tests matching priority or type
Single Test	"Run SWAP-001" / "Run the insufficient balance test"	Only the specified test

Filter Logic

╔════════════════════════════════════════════════════════════════╗
║  SELECTIVE EXECUTION - HOW TO FILTER TESTS                     ║
╠════════════════════════════════════════════════════════════════╣
║                                                                ║
║  1. Parse user request to determine filter:                    ║
║                                                                ║
║     "Run wallet module"     → filter by module: "wallet"       ║
║     "Run swap module tests" → filter by module: "swap"         ║
║     "Run swap tests"        → filter by feature: "Token Swap"  ║
║     "Run WALLET-001"        → filter by id: "WALLET-001"       ║
║     "Run critical tests"    → filter by priority: "critical"   ║
║     "Run negative tests"    → filter by type (from description)║
║                                                                ║
║  2. Build filtered execution list:                             ║
║                                                                ║
║     filtered_tests = []                                        ║
║     for test_id in execution_order:                            ║
║         test = find_test(test_id)                              ║
║         if matches_filter(test, user_filter):                  ║
║             filtered_tests.append(test_id)                     ║
║                                                                ║
║  3. IMPORTANT: Include dependencies!                           ║
║                                                                ║
║     If user requests "Run SWAP-001":                           ║
║       - SWAP-001 depends_on: [WALLET-001]                      ║
║       - Must run WALLET-001 first (as dependency)              ║
║       - Final list: [WALLET-001, SWAP-001]                     ║
║                                                                ║
║  4. Report what will be executed:                              ║
║                                                                ║
║     "Running 2 tests (1 requested + 1 dependency):             ║
║      - WALLET-001 (dependency of SWAP-001)                     ║
║      - SWAP-001 (requested)"                                   ║
║                                                                ║
╚════════════════════════════════════════════════════════════════╝

Filter by Module

Match tests where test.module equals the module ID:

# User: "Run wallet module" or "Run wallet module tests"
# Matches tests with module: "wallet"
- id: WALLET-001
  module: wallet          # ✓ Match
- id: WALLET-DISCONNECT-001
  module: wallet          # ✓ Match
- id: SWAP-001
  module: swap            # ✗ No match

# Available modules are defined in config.yaml:
modules:
  - id: wallet
    name: Wallet
  - id: swap
    name: Token Swap

Module vs Feature:

module: High-level grouping (e.g., "wallet", "swap", "rewards")
feature: Specific functionality within a module (e.g., "Wallet Connection", "Wallet Disconnect")

Use module filtering when you want to run all tests related to a major functional area.

Filter by Feature

Match tests where test.feature contains the keyword:

# User: "Run wallet tests"
# Matches tests with feature containing "Wallet":
- id: WALLET-001
  feature: Wallet Connection # ✓ Match
- id: WALLET-DISCONNECT-001
  feature: Wallet Connection # ✓ Match
- id: SWAP-001
  feature: Token Swap # ✗ No match

Filter by Test ID

Match exact test ID or partial match:

# User: "Run SWAP-001"
# Exact match: only SWAP-001

# User: "Run SWAP tests"
# Partial match: SWAP-001, SWAP-002, SWAP-003, SWAP-FAIL-001

Filter by Priority

Match tests where test.priority equals the keyword:

# User: "Run critical tests"
# Matches: priority: critical

# User: "Run high priority tests"
# Matches: priority: high

Filter by Type (Positive/Negative)

Determine from test description or naming:

# User: "Run negative tests"
# Match tests where:
#   - description.notes contains "NEGATIVE test case"
#   - OR id contains "FAIL" or "DISCONNECT" or "ERROR"

# User: "Run positive tests" / "Run happy path tests"
# Match tests that are NOT negative tests

Dependency Resolution

CRITICAL: When running filtered tests, always include required dependencies:

User requests: "Run SWAP-002"

SWAP-002:
  depends_on: [WALLET-001, SWAP-001]

Resolution:
  1. SWAP-002 needs WALLET-001 → add WALLET-001
  2. SWAP-002 needs SWAP-001 → add SWAP-001
  3. SWAP-001 needs WALLET-001 → already added

Final execution order: [WALLET-001, SWAP-001, SWAP-002]

Report to user:
  "Running 3 tests:
   - WALLET-001 (dependency)
   - SWAP-001 (dependency)
   - SWAP-002 (requested)"

Example Prompts

User Says	Filter Applied	Tests Executed
"Run all tests"	None	All in execution_order
"Run wallet module"	module = wallet	All tests with module: wallet
"Run swap module tests"	module = swap	SWAP-001, SWAP-002, SWAP-003 + dependencies
"Run WALLET-001"	id = WALLET-001	WALLET-001
"Run swap feature tests"	feature contains "Swap"	SWAP-001, SWAP-002, SWAP-003 + dependencies
"Run critical tests only"	priority = critical	WALLET-001, SWAP-001, SWAP-002
"Run negative tests"	type = negative	SWAP-003, WALLET-DISCONNECT-*, SWAP-FAIL-001 + dependencies
"Run the insufficient balance test"	name/id match	SWAP-003 + WALLET-001 (dependency)

Workflow

┌─────────────────────────────────────────────────────────────────┐
│  web-test                                                       │
├─────────────────────────────────────────────────────────────────┤
│                                                                 │
│  Step 1: Check for test cases                                   │
│          ↓                                                      │
│          tests/config.yaml exists?                              │
│          tests/test-cases.yaml exists?                          │
│          ├─ NO  → Prompt user, wait 2 min, fail if no response  │
│          └─ YES → Continue                                      │
│          ↓                                                      │
│  Step 2: Use skill web-test-cleanup                             │
│          ↓                                                      │
│  Step 3: Read config.yaml                                       │
│          ↓                                                      │
│          Is Web3 DApp? (web3.enabled: true)                     │
│          ├─ YES → Step 4: Use skill web-test-wallet-setup       │
│          └─ NO  → Skip Step 4                                   │
│          ↓                                                      │
│  Step 5: Execute test cases                                     │
│          For each test in execution_order:                      │
│          - Check preconditions (e.g., WALLET-001 passed)        │
│          - If WALLET-001: uses web-test-wallet-connect          │
│          - Run test steps                                       │
│          - Record pass/fail                                     │
│          ↓                                                      │
│  Step 6: Use skill web-test-report                              │
│          ↓                                                      │
│  Step 7: Use skill web-test-cleanup --keep-data                 │
│                                                                 │
└─────────────────────────────────────────────────────────────────┘

Step-by-Step Instructions

Step 1: Check for Test Cases

# Check if test files exist
ls -la ./tests/config.yaml ./tests/test-cases.yaml

If files don't exist:

No test cases found in ./tests/ directory.

Would you like to generate test cases first?
Run: skill web-test-case-gen

Waiting for response (2 minute timeout)...

If user doesn't respond within 2 minutes or says no, exit with:

Test execution cancelled. No test cases available.
To generate test cases, run: skill web-test-case-gen

Step 2: Run Cleanup

Use skill web-test-cleanup

Step 3: Parse Config and Load Test Cases

Read ./tests/config.yaml:

cat ./tests/config.yaml

config.yaml Structure:

project:
  name: MyDApp # Project name (for reports)
  url: http://localhost:3000 # Base URL for testing
  framework: React # Framework (informational)

web3:
  enabled: true # true = Web3 DApp, false = regular web app
  wallet: metamask # Wallet type
  network: ethereum # Network name

generated:
  date: 2024-01-15T14:30:00Z
  by: web-test-case-gen

# Module definitions for organized test execution
modules:
  - id: wallet # Module identifier (used in commands)
    name: Wallet # Human-readable name
    description: Wallet connection and management tests
  - id: swap
    name: Token Swap
    description: Token swap functionality tests
  - id: rewards
    name: Rewards
    description: Rewards claiming and staking tests

features: # Features detected (informational)
  - name: Token Swap
    code: src/features/swap/

execution_order: # CRITICAL: Test execution order
  - WALLET-001 # Execute tests in THIS ORDER
  - SWAP-001
  - SWAP-002

Fields to Extract from config.yaml:

Field	Usage
`project.url`	Base URL - prepend to relative URLs in steps
`web3.enabled`	If `true`, run `web-test-wallet-setup` before tests
`modules`	Array of module definitions - for filtering tests by module
`execution_order`	Array of test IDs - execute in this exact order

Read ./tests/test-cases.yaml:

cat ./tests/test-cases.yaml

test-cases.yaml Structure:

test_cases:
  - id: WALLET-001 # Unique test ID (matches execution_order)
    name: Connect Wallet # Human-readable name
    module: wallet # Module this test belongs to (matches modules[].id in config.yaml)
    feature: Wallet Connection
    priority: critical # critical/high/medium/low
    web3: true # Requires wallet interaction
    wallet_popups: 1 # Expected number of wallet popups
    depends_on: [] # Test case dependencies (IDs only)
    preconditions: [] # Other requirements (not test IDs)
    description:
      purpose: | # Why this test exists
        Verify user can connect wallet...
      notes: # Important points to remember
        - Must run first
        - Check wallet address displayed
    uses_skill: web-test-wallet-connect # Optional: skill to use
    steps: # Actions to execute
      - action: navigate
        url: /
      - action: screenshot
        name: before-connect
      - action: click
        selector: text=Connect Wallet
      - action: wallet-approve
    expected: # What to verify after steps
      - Wallet address displayed in header
      - Connection modal closed

Test Case Fields Reference:

Field	Type	Description
`id`	string	Unique identifier (e.g., WALLET-001)
`name`	string	Human-readable test name
`module`	string	Module ID this test belongs to (matches config.yaml modules[].id)
`feature`	string	Specific functionality name (e.g., "Wallet Connection", "Token Swap")
`depends_on`	array	Test IDs that must pass first
`preconditions`	array	Other requirements (NOT test IDs)
`description.purpose`	string	What this test verifies
`description.notes`	array	Important execution notes
`uses_skill`	string	Optional skill to invoke
`steps`	array	Actions to execute
`expected`	array	Expected outcomes to verify

Step 4: Wallet Setup (if Web3)

Skip this step if web3.enabled: false or not set.

Use skill web-test-wallet-setup

This sets up the wallet extension (download, import private key). Wallet connection is handled by test case WALLET-001 during test execution.

Step 5: Execute Test Cases

⚠️ EXECUTE EVERY TEST - NO EXCEPTIONS FOR "TIME CONSTRAINTS" ⚠️ ⚠️ ONE TEST AT A TIME - NO PARALLEL EXECUTION ⚠️

For each test ID in execution_order (SEQUENTIALLY, ONE AT A TIME):

Find the test case in test-cases.yaml
Check depends_on - skip if any dependency failed
Check preconditions
Execute each step
Verify expected results
Record pass/fail
WAIT for completion before next test

┌─────────────────────────────────────────────────────────────────┐
│  DEPENDENCY CHECK BEFORE EACH TEST                              │
│                                                                 │
│  if test.depends_on is not empty:                               │
│      for each dep_id in test.depends_on:                        │
│          if results[dep_id] != PASS:                            │
│              SKIP this test                                     │
│              reason: "Dependency {dep_id} did not pass"         │
│                                                                 │
│  Example:                                                       │
│    SWAP-002 depends_on: [WALLET-001, SWAP-001]                  │
│    - If WALLET-001 failed → SKIP SWAP-002                       │
│    - If SWAP-001 failed → SKIP SWAP-002                         │
│    - If both passed → RUN SWAP-002                              │
│                                                                 │
└─────────────────────────────────────────────────────────────────┘

┌─────────────────────────────────────────────────────────────────┐
│  REMINDER: You MUST execute ALL tests in execution_order.       │
│                                                                 │
│  ❌ DO NOT skip any test because:                               │
│     - "Time constraints" / "To save time"                       │
│     - "Similar to previous test"                                │
│     - "Already tested enough"                                   │
│                                                                 │
│  ✅ Continue executing even if:                                 │
│     - Tests are taking a long time                              │
│     - You've already run many tests                             │
│     - Some tests seem redundant to you                          │
│                                                                 │
│  The user created these tests for a reason. Execute them ALL.   │
└─────────────────────────────────────────────────────────────────┘

Executing Steps - Detailed Guide:

╔════════════════════════════════════════════════════════════════╗
║  HOW TO EXECUTE EACH ACTION TYPE                               ║
╠════════════════════════════════════════════════════════════════╣
║                                                                ║
║  For each step in test.steps array:                            ║
║                                                                ║
║  1. Read step.action to determine action type                  ║
║  2. Execute using test-helper.js or skill                      ║
║  3. Check for errors before proceeding to next step            ║
║                                                                ║
╚════════════════════════════════════════════════════════════════╝

Action	Parameters	How to Execute
`set-viewport`	`width`, `height`, `isMobile`	`node $SKILL_DIR/scripts/test-helper.js set-viewport [width] [height] --mobile --headed --keep-open`
`navigate`	`url`	`node $SKILL_DIR/scripts/test-helper.js navigate [project.url + step.url] --headed --keep-open`
`screenshot`	`name`	`node $SKILL_DIR/scripts/test-helper.js screenshot [step.name].jpg --headed --keep-open`
`click`	`selector`	`node $SKILL_DIR/scripts/test-helper.js click "[step.selector]" --headed --keep-open`
`fill`	`selector`, `value`	`node $SKILL_DIR/scripts/test-helper.js fill "[step.selector]" "[step.value]" --headed --keep-open`
`wait`	`ms`, `reason`	`node $SKILL_DIR/scripts/test-helper.js wait [step.ms] --headed --keep-open`
`wallet-approve`	`note`	Use `skill web-test-wallet-sign` with approve action
`wallet-reject`	`note`	Use `skill web-test-wallet-sign` with reject action
`set-network`	`options` (--latency/--offline/--online)	`node $SKILL_DIR/scripts/test-helper.js set-network [step.options] --headed --keep-open`
`mock-route`	`pattern`, `options`	`node $SKILL_DIR/scripts/test-helper.js mock-route "[step.pattern]" [step.options] --headed --keep-open`
`mock-api-error`	`pattern`, `options`	`node $SKILL_DIR/scripts/test-helper.js mock-api-error "[step.pattern]" [step.options] --headed --keep-open`
`mock-timeout`	`pattern`	`node $SKILL_DIR/scripts/test-helper.js mock-timeout "[step.pattern]" --headed --keep-open`
`throttle-network`	`preset`	`node $SKILL_DIR/scripts/test-helper.js throttle-network [step.preset] --headed --keep-open`
`clear-network`	-	`node $SKILL_DIR/scripts/test-helper.js clear-network --headed --keep-open`

Handling uses_skill Field:

When a test case has uses_skill field, invoke that skill instead of executing steps manually:

Verifying Expected Results:

After executing all steps, verify each item in test.expected:

Automatic Wallet Sign Detection

After each click action in wallet mode, the system automatically detects MetaMask popups and handles them. Use the walletAction field to control the behavior:

walletAction	Behavior
`approve` (default)	Auto-approve signatures and transactions (reject if gas error)
`reject`	Reject the signature/transaction (for testing rejection flows)
`ignore`	Don't wait for popup, skip detection

Example:

steps:
  # Auto-approve (default behavior)
  - action: click
    selector: "#sign-button"

  # Test rejection flow
  - action: click
    selector: "#sign-button"
    walletAction: reject

  # Skip popup detection for non-wallet clicks
  - action: click
    selector: "#regular-button"
    walletAction: ignore

Step 6: Generate Report

Use skill web-test-report

Step 7: Final Cleanup

Use skill web-test-cleanup --keep-data

Test Helper Commands

Location: scripts/test-helper.js

How to Call Scripts

╔════════════════════════════════════════════════════════════════╗
║  SCRIPT CALLING GUIDE                                          ║
╠════════════════════════════════════════════════════════════════╣
║                                                                ║
║  Step 1: Get the skill directory path                          ║
║                                                                ║
║    SKILL_DIR="/Users/duxiaofeng/code/agent-skills/web-test"    ║
║                                                                ║
║  Step 2: Call test-helper.js with command and options          ║
║                                                                ║
║    node $SKILL_DIR/scripts/test-helper.js <command> [args] [options]
║                                                                ║
║  IMPORTANT OPTIONS:                                            ║
║    --headed      Show browser window (required for vision)     ║
║    --keep-open   Keep browser open after command               ║
║    --wallet      Load MetaMask wallet extension                ║
║                                                                ║
╚════════════════════════════════════════════════════════════════╝

Full Command Examples:

# Set skill directory
SKILL_DIR="/Users/duxiaofeng/code/agent-skills/web-test"

# Navigate to URL
node $SKILL_DIR/scripts/test-helper.js navigate "http://localhost:3000" --headed --keep-open

# Take screenshot for AI analysis
node $SKILL_DIR/scripts/test-helper.js screenshot before-test --headed --keep-open

# Click element using selector (text, css, or id)
node $SKILL_DIR/scripts/test-helper.js click "text=Submit" --headed --keep-open
node $SKILL_DIR/scripts/test-helper.js click "#submit-btn" --headed --keep-open

# Fill input field
node $SKILL_DIR/scripts/test-helper.js fill "#email" "test@example.com" --headed --keep-open

# Press key
node $SKILL_DIR/scripts/test-helper.js press-key Enter --headed --keep-open

# Wait for milliseconds
node $SKILL_DIR/scripts/test-helper.js wait 2000 --headed --keep-open

# Scroll page
node $SKILL_DIR/scripts/test-helper.js scroll down 500 --headed --keep-open

# Set mobile viewport
node $SKILL_DIR/scripts/test-helper.js set-viewport 375 667 --mobile --headed --keep-open

# With wallet extension (for Web3 DApps)
node $SKILL_DIR/scripts/test-helper.js navigate "http://localhost:3000" --headed --keep-open --wallet

Output Format:

All commands output JSON to stdout:

{
  "success": true,
  "screenshot": "test-output/screenshots/before-test.jpg",
  "url": "http://localhost:3000",
  "instruction": "Use the Read tool to view this screenshot..."
}

All Available Commands

Browser Lifecycle Commands

Command	Args	Description
`start`	-	Start browser session
`stop`	-	Stop browser session
`browser-open`	-	Open browser and keep it running (auto --headed)
`browser-close`	-	Close the browser explicitly

# Open browser for manual inspection
node $SKILL_DIR/scripts/test-helper.js browser-open

# Close browser when done
node $SKILL_DIR/scripts/test-helper.js browser-close

Navigation Commands

Command	Args	Description
`navigate`	`<url>`	Navigate to URL
`screenshot`	`[name]`	Take screenshot
`content`	-	Get page HTML content (saves to test-output/page-content.html)

# Navigate to URL
node $SKILL_DIR/scripts/test-helper.js navigate "http://localhost:3000" --headed --keep-open

# Take screenshot
node $SKILL_DIR/scripts/test-helper.js screenshot home --headed --keep-open

Element Interaction Commands (Selector-based)

Command	Args	Description
`click`	`<selector>`	Click element by CSS selector
`fill`	`<selector> <value>`	Fill input field
`select`	`<selector> <value>`	Select dropdown option
`check`	`<selector>`	Check checkbox
`uncheck`	`<selector>`	Uncheck checkbox
`hover`	`<selector>`	Hover over element
`press`	`<selector> <key>`	Press key on element
`text`	`<selector>`	Get element text content

# Click button by selector
node $SKILL_DIR/scripts/test-helper.js click "#submit-btn" --headed --keep-open

# Fill input field
node $SKILL_DIR/scripts/test-helper.js fill "#email" "test@example.com" --headed --keep-open

# Select dropdown option
node $SKILL_DIR/scripts/test-helper.js select "#country" "US" --headed --keep-open

# Check/uncheck checkbox
node $SKILL_DIR/scripts/test-helper.js check "#agree-terms" --headed --keep-open
node $SKILL_DIR/scripts/test-helper.js uncheck "#newsletter" --headed --keep-open

# Hover over element
node $SKILL_DIR/scripts/test-helper.js hover "#dropdown-menu" --headed --keep-open

# Press key on element
node $SKILL_DIR/scripts/test-helper.js press "#search-input" Enter --headed --keep-open

# Get element text
node $SKILL_DIR/scripts/test-helper.js text "#balance" --headed --keep-open

Utility Commands

Command	Args	Description
`screenshot`	`[name]`	Take screenshot
`press-key`	`<key>`	Press keyboard key globally (Enter, Tab, Escape, etc.)
`scroll`	`<dir> [amount]`	Scroll page (dir: up/down/left/right)
`wait-stable`	`[ms]`	Wait for page to stabilize (network idle)
`get-page-info`	-	Get page info and screenshot

NOTE: Use click, fill, hover commands with text/css/id selectors for element interactions.

# Take screenshot
node $SKILL_DIR/scripts/test-helper.js screenshot before-click --headed --keep-open

# Press keyboard key
node $SKILL_DIR/scripts/test-helper.js press-key Enter --headed --keep-open
node $SKILL_DIR/scripts/test-helper.js press-key Tab --headed --keep-open
node $SKILL_DIR/scripts/test-helper.js press-key Escape --headed --keep-open

# Scroll page
node $SKILL_DIR/scripts/test-helper.js scroll down 500 --headed --keep-open
node $SKILL_DIR/scripts/test-helper.js scroll up 300 --headed --keep-open

# Wait for page stability
node $SKILL_DIR/scripts/test-helper.js wait-stable 5000 --headed --keep-open

# Get full page info for AI
node $SKILL_DIR/scripts/test-helper.js get-page-info --headed --keep-open

…(truncated)

Web Test

File contents

Web Test Execution

CRITICAL RULES - READ FIRST

Rule 1: Wallet Setup Based on config.yaml

Rule 2: NEVER Skip Tests Due to Time Constraints

Rule 3: Follow Execution Order

Rule 4: Timeout Rules - FAIL FAST

Rule 5: FIX TEST CASES DURING EXECUTION

Rule 6: SEQUENTIAL EXECUTION ONLY - ONE TEST AT A TIME

Prerequisites

Quick Start

Selective Test Execution

Execution Modes

Filter Logic

Filter by Module

Filter by Feature

Filter by Test ID

Filter by Priority

Filter by Type (Positive/Negative)

Dependency Resolution

Example Prompts

Workflow

Step-by-Step Instructions

Step 1: Check for Test Cases

Step 2: Run Cleanup

Step 3: Parse Config and Load Test Cases

Step 4: Wallet Setup (if Web3)

Step 5: Execute Test Cases

Automatic Wallet Sign Detection

Step 6: Generate Report

Step 7: Final Cleanup

Test Helper Commands

How to Call Scripts

All Available Commands

Browser Lifecycle Commands

Navigation Commands

Element Interaction Commands (Selector-based)

Utility Commands

Frequently asked questions

Web Test

File contents

Web Test Execution

CRITICAL RULES - READ FIRST

Rule 1: Wallet Setup Based on config.yaml

Rule 2: NEVER Skip Tests Due to Time Constraints

Rule 3: Follow Execution Order

Rule 4: Timeout Rules - FAIL FAST

Rule 5: FIX TEST CASES DURING EXECUTION

Rule 6: SEQUENTIAL EXECUTION ONLY - ONE TEST AT A TIME

Prerequisites

Quick Start

Selective Test Execution

Execution Modes

Filter Logic

Filter by Module

Filter by Feature

Filter by Test ID

Filter by Priority

Filter by Type (Positive/Negative)

Dependency Resolution

Example Prompts

Workflow

Step-by-Step Instructions

Step 1: Check for Test Cases

Step 2: Run Cleanup

Step 3: Parse Config and Load Test Cases

Step 4: Wallet Setup (if Web3)

Step 5: Execute Test Cases

Automatic Wallet Sign Detection

Step 6: Generate Report

Step 7: Final Cleanup

Test Helper Commands

How to Call Scripts

All Available Commands

Browser Lifecycle Commands

Navigation Commands

Element Interaction Commands (Selector-based)

Utility Commands

Related skills

Frequently asked questions

How do I install the Web Test skill?

What does the Web Test skill do?

Is Web Test safe to use?

Which AI agents work with Web Test?

Is Web Test free to use?

Who published Web Test?