tomevault-io WiFi Automation Tool
Control WiFi on Android devices.
How It Works
This skill provides instructions for the WiFi Automation tool node. Connect the WiFi Automation node to Zeenie's input-tools handle to enable WiFi control.
wifi_automation Tool
Control WiFi settings and get network information.
Schema Fields
| Field | Type | Required | Description |
|---|---|---|---|
| action | string | Yes | Action to perform (see below) |
| parameters | object | No | Additional parameters for certain actions |
Actions
| Action | Description | Parameters |
|---|---|---|
status |
Get WiFi status and connection info | None |
enable |
Turn WiFi on | None |
disable |
Turn WiFi off | None |
scan |
Scan for available networks | None |
Examples
Get WiFi status:
{
"action": "status"
}
Enable WiFi:
{
"action": "enable"
}
Disable WiFi:
{
"action": "disable"
}
Scan for networks:
{
"action": "scan"
}
Response Formats
Status response:
{
"success": true,
"service": "wifi_automation",
"action": "status",
"data": {
"enabled": true,
"connected": true,
"ssid": "MyHomeNetwork",
"bssid": "aa:bb:cc:dd:ee:ff",
"ip_address": "192.168.1.100",
"link_speed": 72,
"rssi": -45,
"frequency": 2437
}
}
Scan response:
{
"success": true,
"service": "wifi_automation",
"action": "scan",
"data": {
"networks": [
{
"ssid": "MyHomeNetwork",
"bssid": "aa:bb:cc:dd:ee:ff",
"rssi": -45,
"frequency": 2437,
"security": "WPA2"
},
{
"ssid": "Neighbor_WiFi",
"bssid": "11:22:33:44:55:66",
"rssi": -70,
"frequency": 5180,
"security": "WPA3"
}
]
}
}
Enable/Disable response:
{
"success": true,
"service": "wifi_automation",
"action": "enable",
"data": {
"message": "WiFi enabled successfully"
}
}
Response Fields
| Field | Description |
|---|---|
| enabled | WiFi radio is on |
| connected | Connected to a network |
| ssid | Network name |
| bssid | Access point MAC address |
| ip_address | Device IP on network |
| link_speed | Connection speed in Mbps |
| rssi | Signal strength (dBm, closer to 0 is stronger) |
| frequency | Channel frequency in MHz |
Use Cases
| Use Case | Action | Description |
|---|---|---|
| Check connection | status | Verify WiFi is connected |
| Toggle WiFi | enable/disable | Control WiFi radio |
| Find networks | scan | List available networks |
| Signal strength | status | Check connection quality |
Common Workflows
Auto-connect workflow
- Check WiFi status
- If not enabled, enable it
- Scan for networks
- Report available options
Battery saving
- Check if on mobile data
- If not using WiFi, disable it
- Re-enable when needed
Signal Strength Guide
| RSSI (dBm) | Quality |
|---|---|
| > -50 | Excellent |
| -50 to -60 | Good |
| -60 to -70 | Fair |
| -70 to -80 | Weak |
| < -80 | Poor |
Setup Requirements
- Connect the WiFi Automation node to Zeenie's
input-toolshandle - Android device must be paired
- Location permission may be required for scanning
Converted and distributed by TomeVault — claim your Tome and manage your conversions.