Pr Release

PR Release (tier 3)

Derive a one-page announcement from the public case study — and only from it. The public case study is the sanitization firewall: this command introduces no figure that is not already in it and re-derives nothing from the interim package. Value is engineer-hours, cycle time, and capacity; never money.

Read ../../references/interim-format.md first — it defines run location. Defer these until the firewall (the public case study) is located:

• ../../references/provenance.md — tag rendering, denominators, the no-currency contract.
• ../../references/audiences.md — the tier-3 contract.

User arguments: $ARGUMENTS

Context

Recent runs: !sh -c 'ls -dt "$HOME"/Documents/*/business/ /mnt/c/Users/*/Documents/*/business/ 2>/dev/null' | head -5 | grep . || echo "(no runs found)"

Procedure

1. Locate the run

Use the $ARGUMENTS path if given, else the newest run per interim-format.md. Confirm the choice with the user.

2. Locate and verify the firewall

Check for <run>/reports/case-study-public.md. If it is missing, ask via AskUserQuestion whether to run /business:case-study-public now or stop — never draft the release straight from the interim package. If present, run the firewall sweep from audiences.md; a sweep failure routes back to /business:case-study-public, never into hand-patching here.

3. Compose one page

Read the deferred references above. From the public case study only:

1. Headline result — the case study's headline, with its tag and range.
2. Supporting numbers — two or three, each with its denominator and window length, exactly as they appear in the case study.
3. Quote placeholder — clearly marked as a placeholder, with attribution left blank for the user to fill.
4. Limitations one-liner — a single candid sentence distilled from the case study's limitations section.

Write <run>/reports/pr-release.md.

Rules

• Every figure must be traceable to the public case study verbatim or by stated rounding; if a wanted figure is not there, the answer is to extend the case study first, not to reach into the run.
• The tier-3 contract in audiences.md applies in full — no internal identifiers, no currency.

Output

Open with a one-line hero (✓ PR release: <headline>, ✓ Evidence report: <supported claim, unknowns named>, or ⚠ Blocked: <reason>), then exactly these sections:

1. ## Run — the run chosen.
2. ## Firewall — the public case study used, and confirmation that every figure traces to it.
3. ## Report — where it was written and the headline.

End with an AskUserQuestion panel: revise the headline, regenerate after updating the case study, or stop. Skip the panel in plan mode or when running non-interactively.