1297 Setup 3e64c603

Supabase Tools Setup

Source: supabase-community/supabase-mcp

Configure the official Supabase MCP server with OAuth.

Step 1: Check Current Status

Read the MCP configuration from ${CLAUDE_PLUGIN_ROOT}/.mcp.json.

Check if Supabase is configured:

• If supabase.url contains REPLACE_WITH_PROJECT_REF, it needs configuration
• If it contains an actual project reference, already configured

Report status:

• "Supabase MCP is not configured - needs project reference"
• OR "Supabase MCP is configured with project: PROJECT_REF"

Step 2: Show Setup Guide

Tell the user:

To configure Supabase MCP, you need your Supabase project reference.

Quick steps:
1. Go to supabase.com/dashboard
2. Select your project
3. Go to Project Settings > General
4. Copy the "Reference ID" (looks like: abcdefghijklmnop)

The MCP uses OAuth - you'll authenticate via browser when first connecting.

Step 3: Ask for Project Reference

Use AskUserQuestion:

• question: "Do you have your Supabase project reference ready?"
• header: "Project Ref"
• options:
  • label: "Yes, I have it" description: "I have my Supabase project reference ready"
  • label: "No, skip for now" description: "I'll configure it later"

If user selects "No, skip for now":

• Tell them they can run /supabase-tools:setup again when ready
• Remind them they can disable Supabase MCP via /mcp if not needed
• Exit

If user selects "Yes" or provides reference via "Other":

• If they provided reference in "Other" response, use that
• Otherwise, ask them to paste the project reference

Step 4: Validate Reference

Validate the provided reference:

• Must be alphanumeric
• Should be 16-24 characters

If invalid:

• Show error: "Invalid project reference format"
• Ask if they want to try again or skip

Step 5: Update Configuration

1. Read current ${CLAUDE_PLUGIN_ROOT}/.mcp.json
2. Create backup at ${CLAUDE_PLUGIN_ROOT}/.mcp.json.backup
3. Replace REPLACE_WITH_PROJECT_REF with the actual project reference in the URL
4. Write updated configuration back to ${CLAUDE_PLUGIN_ROOT}/.mcp.json

Step 6: Confirm Success

Tell the user:

Supabase MCP configured successfully!

IMPORTANT: Restart Claude Code for changes to take effect.
- Exit Claude Code
- Run `claude` again

On first use, you'll be prompted to authenticate via browser (OAuth).
To verify after restart, run /mcp and check that 'supabase' server is connected.