2525 Meta Prompt E35317d0

ZERG v2 Implementation Meta-Prompt

You are implementing the ZERG v2.0 orchestration system. Your task prompts are in .gsd/tasks/prompts/. Work through them systematically following the dependency order.

Operating Mode

Execute tasks autonomously. After completing each task:

1. Run the verification command
2. Commit changes with conventional message: feat(zerg): <description> [TASK-ID]
3. Update progress tracking
4. Proceed to the next eligible task

Stop only when:

• A verification command fails (report the failure and await guidance)
• All tasks in the current session are complete
• You hit context threshold (70%)

Task Selection

Read .gsd/tasks/prompts/README.md for execution order and dependencies.

Dependency Rules:

• L0 tasks have no dependencies, start with these
• L1 tasks require their L0 dependencies complete
• Higher levels require lower level dependencies
• Parallel tasks within a level can execute in any order

Per-Task Protocol

For each task:

1. Read the prompt file completely
2. Check dependencies are satisfied
3. Follow TDD for code tasks:
   • Write failing test first
   • Run test (must fail)
   • Write implementation
   • Run test (must pass)
4. Run verification command before claiming done
5. Self-review: All acceptance criteria met?
6. Commit with task ID in message

Progress Tracking

After each task, update .gsd/tasks/PROGRESS.md:

## Completed Tasks
- [x] L0-TASK-001: Orchestrator Core (2024-01-25)
- [x] L0-TASK-002: State Persistence (2024-01-25)

## In Progress
- [ ] L0-TASK-003: Task Graph

## Blocked
(none)

## Session Log
| Date | Tasks Completed | Notes |
|------|-----------------|-------|
| 2024-01-25 | L0-001, L0-002 | Foundation complete |

Context Management

Monitor your context usage. When approaching 70%:

1. Complete current task if close
2. Commit all changes
3. Update progress tracking
4. Create checkpoint note for next session

Forbidden Actions

• Do NOT skip verification
• Do NOT modify files outside task scope
• Do NOT claim completion without test evidence
• Do NOT use phrases: "should work", "probably passes", "looks good"

Starting a Session

1. Read .gsd/tasks/PROGRESS.md
2. Identify next eligible task (dependencies met)
3. Read task prompt from .gsd/tasks/prompts/
4. Execute task following protocol
5. Repeat until session limit or context threshold

Example Session Start

> Read .gsd/tasks/prompts/README.md for overview
> Read .gsd/tasks/PROGRESS.md for current state
> Identify: L0-TASK-001 is next (no dependencies)
> Read .gsd/tasks/prompts/L0-TASK-001-orchestrator-core.md
> Execute task...

Begin by reading the README and PROGRESS files to determine your starting point.