266 Debugging 7b3de054

Debugging EvalView — How to Debug Failing AI Agent Tests

This guide helps you troubleshoot issues when running EvalView tests, including "No response" errors, database issues, timeouts, and tool name mismatches.

Common Issues

1. Tests Failing with "No response"

Symptom: Test results show final_output: "No response" and score 0

Cause: The adapter isn't parsing the API response correctly

Solution: Run with verbose mode to see what the API is actually returning:

# Option 1: Use --verbose flag
evalview run --verbose

# Option 2: Set DEBUG environment variable
DEBUG=1 evalview run

This will show you:

• 🚀 Request being sent
• 📤 Request payload
• ✅ Response status
• 📥 Each line of the streaming response
• 🔍 Parsed event types
• ⚠️ Unhandled events or errors

2. Database Foreign Key Errors

Symptom: Error message about Foreign key constraint violated for userId

Cause: The test user ID doesn't exist in your database

Solutions:

Option A: Create a test user in your database

-- For PostgreSQL (adjust for your database)
INSERT INTO users (id, email, name)
VALUES ('test-user', 'test@example.com', 'Test User');

Option B: Use a real user ID from your database Edit your test cases to use a valid user:

# tests/test-cases/example.yaml
input:
  query: "Your query here"
  context:
    userId: "your-real-user-id"  # Use an actual user ID

Option C: Update your API to handle non-existent test users gracefully

3. Tests Timing Out

Symptom: Tests exceed latency threshold (e.g., 76s instead of 10s)

Possible causes:

• API endpoint is slow
• Database queries are slow
• External API calls are timing out

Solutions:

1. Increase timeout in config:

# .evalview/config.yaml
timeout: 120.0  # Increase from 60.0

2. Increase latency threshold in test case:

# tests/test-cases/example.yaml
thresholds:
  max_latency: 120000  # 120 seconds instead of 10

3. Optimize your API endpoints

4. Wrong Tool Names

Symptom: Test shows "missing tools" even though your API is working

Cause: Your API uses different tool names than expected in the test

Solution: Update your test case to match your actual tool names. Run with --verbose to see what tools are actually being called.

Understanding the Adapter

TapeScopeAdapter Event Types

The adapter recognizes these event types from JSONL streaming:

Adding Support for Your Event Format

If your API uses different event types, you can:

1. Check logs: Run with --verbose to see what event types your API sends

2. Extend the adapter: Edit evalview/adapters/tapescope_adapter.py to handle your event types

3. Use HTTPAdapter: If your API returns a simple JSON response (non-streaming), use the HTTPAdapter instead:

# .evalview/config.yaml
adapter: http  # Instead of tapescope
endpoint: http://localhost:3000/api/your-endpoint

Verbose Output Example

🔍 Verbose mode enabled

Running test cases...

2025-11-19 22:30:00 - tapescope_adapter - INFO - 🚀 Executing request: Analyze AAPL stock performance...
2025-11-19 22:30:00 - tapescope_adapter - DEBUG - 📤 Payload: {
  "message": "Analyze AAPL stock performance",
  "route": "orchestrator",
  "userId": "test-user"
}
2025-11-19 22:30:00 - tapescope_adapter - INFO - ✅ Response status: 200
2025-11-19 22:30:01 - tapescope_adapter - DEBUG - 📥 Line 1: {"type":"start","data":{"planId":"plan_123"}}
2025-11-19 22:30:01 - tapescope_adapter - DEBUG - 🔍 Event type: 'start'
2025-11-19 22:30:01 - tapescope_adapter - DEBUG - ℹ️ Info event: start
...

Getting Help

If you're still having issues:

1. Check the results JSON file: .evalview/results/TIMESTAMP.json
2. Look at the trace section to see what was captured
3. Compare expected vs actual in the evaluations
4. Open an issue with the verbose output and your test case

Tips

• Start with simple test cases and gradually add complexity
• Use the conversational route for faster iteration during development
• Check that your API endpoint is actually running before running tests
• Verify your OPENAI_API_KEY is set correctly for LLM-as-judge evaluation

Related Documentation

• Troubleshooting — Common issues with type errors, tool mismatches, and LLM judges
• Adapters — Adapter configuration and response parsing
• Trace Specification — Understanding the execution trace format
• YAML Schema — Test case schema reference
• CLI Reference — Verbose mode and debug flags