Cross-Site Request Forgery Prevention Cheat Sheet

Cross-Site Request Forgery Prevention Cheat Sheet

Introduction

A Cross-Site Request Forgery (CSRF) attack occurs when a malicious web site, email, blog, instant message, or program tricks an authenticated user's web browser into performing an unwanted action on a trusted site. If a target user is authenticated to the site, unprotected target sites cannot distinguish between legitimate authorized requests and forged authenticated requests.

Since browser requests automatically include all cookies including session cookies, this attack works unless proper authorization is used, which means that the target site's challenge-response mechanism does not verify the identity and authority of the requester. In effect, CSRF attacks make a target system perform attacker-specified functions via the victim's browser without the victim's knowledge (normally until after the unauthorized actions have been committed).

However, successful CSRF attacks can only exploit the capabilities exposed by the vulnerable application and the user's privileges. Depending on the user's credentials, the attacker can transfer funds, change a password, make an unauthorized purchase, elevate privileges for a target account, or take any action that the user is permitted to do.

In short, the following principles should be followed to defend against CSRF:

IMPORTANT: Remember that Cross-Site Scripting (XSS) can defeat all CSRF mitigation techniques! While Cross-Site Scripting (XSS) vulnerabilities can bypass CSRF protections, CSRF tokens are still essential for web applications that rely on cookies for authentication. Consider the client and authentication method to determine the best approach for CSRF protection in your application.

• See the OWASP XSS Prevention Cheat Sheet for detailed guidance on how to prevent XSS flaws.
• First, check if your framework has built-in CSRF protection and use it
• If the framework does not have built-in CSRF protection, add CSRF tokens to all state-changing requests (requests that cause actions on the site) and validate them on the backend.
• If your software targets only modern browsers, you may rely on Fetch Metadata headers together with the fallback options described below to block cross-site state-changing requests.
• Stateful software should use the synchronizer token pattern
• Stateless software should use double submit cookies
• If an API-driven site can't use <form> tags, consider using custom request headers
• Implement at least one mitigation from Defense in Depth Mitigations section
• SameSite Cookie Attribute can be used for session cookies but be careful to NOT set a cookie specifically for a domain. This action introduces a security vulnerability because all subdomains of that domain will share the cookie, and this is particularly an issue if a subdomain has a CNAME to domains not in your control.
• Consider implementing user interaction based protection for highly sensitive operations
• Consider verifying the origin with standard headers
• Do not use GET requests for state changing operations.
• If for any reason you do it, protect those resources against CSRF

Built-In Or Existing CSRF Implementations

Before building a custom token or Fetch-Metadata implementation, check whether your framework or platform already provides CSRF protection you can use. Built-in defenses are generally preferable because they’re maintained by the framework authors and reduce the risk of subtle implementation mistakes. For example:

• .NET can use built-in protection to add tokens to CSRF vulnerable resources. If you choose to use this protection, .NET makes you responsible for proper configuration (such as key management and token management).
• Starting from 1.25, Go developers can rely on the built-in CrossOriginProtection type. It implements a Fetch-Metadata-based CSRF defense (including validation of Sec-Fetch-Site and related headers) directly in the standard library.

Token-Based Mitigation

The synchronizer token pattern is one of the most popular and recommended methods to mitigate CSRF.

Synchronizer Token Pattern

CSRF tokens should be generated on the server-side and they should be generated only once per user session or each request. Because the time range for an attacker to exploit the stolen tokens is minimal for per-request tokens, they are more secure than per-session tokens. However, using per-request tokens may result in usability concerns.

For example, the "Back" button browser capability can be hindered by a per-request token as the previous page may contain a token that is no longer valid. In this case, interaction with a previous page will result in a CSRF false positive security event on the server-side. If per-session token implementations occur after the initial generation of a token, the value is stored in the session and is used for each subsequent request until the session expires.

When a client issues a request, the server-side component must verify the existence and validity of the token in that request and compare it to the token found in the user session. The request should be rejected if that token was not found within the request or the value provided does not match the value within the user session. Additional actions such as logging the event as a potential CSRF attack in progress should also be considered.

CSRF tokens should be:

• Unique per user session.
• Secret
• Unpredictable (large random value generated by a secure method).

CSRF tokens prevent CSRF because without a CSRF token, an attacker cannot create valid requests to the backend server.

Transmitting CSRF Tokens in Synchronized Patterns

The CSRF token can be transmitted to the client as part of a response payload, such as a HTML or JSON response, then it can be transmitted back to the server as a hidden field on a form submission or via an AJAX request as a custom header value or part of a JSON payload. A CSRF token should not be transmitted in a cookie for synchronized patterns. A CSRF token must not be leaked in the server logs or in the URL. GET requests can potentially leak CSRF tokens at several locations, such as the browser history, log files, network utilities that log the first line of a HTTP request, and Referer headers if the protected site links to an external site.

For example:

<form action="/transfer.do" method="post">
<input type="hidden" name="CSRFToken" value="OWY4NmQwODE4ODRjN2Q2NTlhMmZlYWEwYzU1YWQwMTVhM2JmNGYxYjJiMGI4MjJjZDE1ZDZMGYwMGEwOA==">
[...]
</form>

Since requests with custom headers are automatically subject to the same-origin policy, it is more secure to insert the CSRF token in a custom HTTP request header via JavaScript than adding a CSRF token in the hidden field form parameter.

ALTERNATIVE: Using A Double-Submit Cookie Pattern

If maintaining the state for CSRF token on the server is problematic, you can use an alternative technique known as the Double Submit Cookie pattern. This technique is easy to implement and is stateless. There are different ways to implement this technique, where the naive pattern is the most commonly used variation.

Signed Double-Submit Cookie (RECOMMENDED)

The most secure implementation of the Double Submit Cookie pattern is the Signed Double-Submit Cookie, which explicitly ties tokens to the user's authenticated session (e.g., session ID). Simply signing tokens without session binding provides minimal protection and remains vulnerable to cookie injection attacks. Always bind the CSRF token explicitly to session-specific data.

If the token contains sensitive information (like session IDs or claims), always use Hash-based Message Authentication (HMAC) with a server-side secret key. This prevents token forgery while ensuring integrity. HMAC is preferred over simple hashing in all cases as it protects against various cryptographic attacks. For scenarios requiring confidentiality of token contents, use authenticated encryption instead.

Employing HMAC CSRF Tokens

To generate HMAC CSRF tokens (with a session-dependent user value), the system must have:

• A session-dependent value that changes with each login session. This value should only be valid for the entirety of the users authenticated session. Avoid using static values like the user's email or ID, as they are not secure (1 | 2 | 3). It's worth noting that updating the CSRF token too frequently, such as for each request, is a misconception that assumes it adds substantial security while actually harming the user experience (1). For example, you could choose one, or a combination, of the following session-dependent values:
  • The server-side session ID (e.g. PHP or ASP.NET). This value should never leave the server or be in plain text in the CSRF Token.
  • A random value (e.g. UUID) within a JWT that changes every time a JWT is created.
• A secret cryptographic key Not to be confused with the random value from the naive implementation. This value is used to generate the HMAC hash. Ideally, store this key as discussed in the Cryptographic Storage page.
• A random value for anti-collision purposes. Generate a random value (preferably cryptographically random) to ensure that consecutive calls within the same second do not produce the same hash (1).

Should Timestamps be Included in CSRF Tokens for Expiration?

It's a common misconception to include timestamps as a value to specify the CSRF token expiration time. A CSRF Token is not an access token. They are used to verify the authenticity of requests throughout a session, using session information. A new session should generate a new token (1).

Pseudo-Code For Implementing HMAC CSRF Tokens

Below is an example in pseudo-code that demonstrates the implementation steps described above:

// Gather the values
secret = getSecretSecurely("CSRF_SECRET") // HMAC secret key
sessionID = session.sessionID // Current authenticated user session
randomValue = cryptographic.randomValue(64) // Cryptographic random value

// Create the CSRF Token
message = sessionID.length + "!" + sessionID + "!" + randomValue.length + "!" + randomValue.toHex() // HMAC message payload
hmac = hmac("SHA256", secret, message) // Generate the HMAC hash
// Add the `randomValue` to the HMAC hash to create the final CSRF token.
// Avoid using the `message` because it contains the sessionID in plain text,
// which the server already stores separately.
csrfToken = hmac.toHex() + "." + randomValue.toHex()

// Store the CSRF Token in a cookie
response.setCookie("csrf_token=" + csrfToken + "; Secure") // Set Cookie without HttpOnly flag

Below is an example in pseudo-code that demonstrates validation of the CSRF token once it is sent back from the client:

// Get the CSRF token from the request
csrfToken = request.getParameter("csrf_token") // From header or form field (NOT cookie)

// Split the token to get the randomValue
const tokenParts = csrfToken.split(".");
const hmacFromRequest = tokenParts[0];
const randomValue = tokenParts[1];

// Recreate the HMAC with the current session and the randomValue from the request
secret = getSecretSecurely("CSRF_SECRET") // HMAC secret key
sessionID = session.sessionID // Current authenticated user session
message = sessionID.length + "!" + sessionID + "!" + randomValue.length + "!" + randomValue

// Generate the expected HMAC
expectedHmac = hmac("SHA256", secret, message)

// Compare the HMAC from the request with the expected HMAC
if (!constantTimeEquals(hmacFromRequest, expectedHmac)) {
    // HMAC validation failed, reject the request
    response.sendError(403, "Invalid CSRF token")
    logError("Invalid CSRF token", hmacFromRequest, expectedHmac)
    return
}

// CSRF validation passed, continue processing the request
// ...

Note: The constantTimeEquals function should be used to compare the HMACs to prevent timing attacks. This function compares two strings in constant time, regardless of how many characters match.

Naive Double-Submit Cookie Pattern (DISCOURAGED)

The Naive Double-Submit Cookie method is a scalable and easy-to-implement technique which uses a cryptographically strong random value as a cookie and as a request parameter (even before user authentication). Then the server verifies if the cookie value and request value match. The site must require that every transaction request from the user includes this random value as a hidden form value or inside the request header. If the value matches at server side, the server accepts it as a legitimate request and if they don't, it rejects the request.

Since an attacker is unable to access the cookie value during a cross-site request, they cannot include a matching value in the hidden form value or as a request parameter/header.

Though the Naive Double-Submit Cookie method is simple and scalable, it remains vulnerable to cookie injection attacks, especially when attackers control subdomains or network environments allowing them to plant or overwrite cookies. For instance, an attacker-controlled subdomain (e.g., via DNS takeover) could inject a matching cookie and thus forge a valid request token. This resource details these vulnerabilities. Therefore, always prefer the Signed Double-Submit Cookie pattern with session-bound HMAC tokens to mitigate these threats.

Fetch Metadata headers

Fetch Metadata request headers provide extra information about the context from which an HTTP request was made. Servers can use these headers — most importantly Sec-Fetch-Site — as a lightweight and reliable method to block obvious cross-site requests. See the Fetch Metadata specification for details.

Because some legacy browsers do not send Sec-Fetch-* headers, a fallback to standard origin verification headers is a mandatory requirement for any Fetch Metadata implementation. Sec-Fetch-* is supported in all major browsers since March 2023.

The Fetch Metadata request headers are:

• Sec-Fetch-Site — the primary signal for CSRF protection. It indicates the relationship between the request initiator’s origin and its target's origin: same-origin, same-site, cross-site, or none.
• Sec-Fetch-Mode, Sec-Fetch-Dest, Sec-Fetch-User — additional headers that provide context about the request (such as the request mode, destination type, or whether it was triggered by a user navigation). More details are available in the MDN documentation.

If any of the headers above contain values not listed in the specification, in order to support forward-compatibility, servers should ignore those headers.

Ease of use

Unlike synchronizer tokens or double-submit patterns — which require additional client/server coordination and are difficult to implement correctly — Fetch Metadata checks are much more straightforward. They typically require only a small amount of server-side logic (inspect Sec-Fetch-Site, optionally refine with Sec-Fetch-Mode/Sec-Fetch-Dest) and no client changes. That simplicity reduces complexity, making the approach attractive for many applications.

Browser compatibility

Fetch Metadata request headers are supported in all modern browsers on both desktop and mobile (Chrome, Edge, Firefox, Safari 16.4+, and even in webviews on both iOS and Android), with over 98% global coverage. For compatibility detail, see the browser support table.

For the rare cases of outdated or embedded browsers that lack Sec-Fetch-* support, a fallback to standard origin verification should provide the required coverage. If this is acceptable for your project, consider prompting users to update their browsers, as they are running on outdated and potentially insecure versions.

How to treat Fetch Metadata headers on the server-side

Sec-Fetch-Site is the most useful Fetch Metadata header for blocking CSRF-like cross-origin requests and should be the primary signal in a Fetch-Metadata-based policy. Use other Fetch Metadata headers (Sec-Fetch-Mode, Sec-Fetch-Dest, Sec-Fetch-User) to further refine or tailor policies to your application's needs (for example, allowing top-level navigation requests or permitting specific Dest values for resource endpoints). Policy (high level)

1. If Sec-Fetch-Site is present

   1.1. Treat cross-site as untrusted for state-changing actions. By default, reject non-safe methods (POST / PUT / PATCH / DELETE) when Sec-Fetch-Site: cross-site.

   const SAFE_METHODS = new Set(['GET','HEAD','OPTIONS']);
   const site = req.get('Sec-Fetch-Site'); // e.g. 'cross-site','same-site','same-origin','none'
   
   if (site === 'cross-site' && !SAFE_METHODS.has(req.method)) {
     return false; // forbid this request
   }
   

   1.2 If your application relies on safe HTTP methods (GET, HEAD, or OPTIONS) for state‑changing actions, you should explicitly reflect that in your policy – e.g., by requiring a Fetch‑Metadata header review for requests to those endpoints. This can be enforced with a policy rule like:

   const SAFE_METHODS = new Set(['GET','HEAD','OPTIONS']);
   const SENSITIVE_ENDPOINTS = new Set([
     '/user/profile',
     '/account/details',
   ]);
   
   const site = req.get('Sec-Fetch-Site');
   const path = req.path;
   
   // Block if cross-site + unsafe method OR cross-site + sensitive endpoint
   if (site === 'cross-site' && (!SAFE_METHODS.has(req.method) || SENSITIVE_ENDPOINTS.has(path))) {
     return false; // forbid this request
   }
   

   1.3. Allow same-origin. Treat same-site as allowed only if your threat model trusts sibling subdomains; otherwise handle same-site conservatively (for example, require additional validation).

   const trustSameSite = false; // set true only if you trust sibling subdomains
   
   if (site === 'same-origin') {
     return true;
   } else if (site === 'same-site') {
     // handle same-site separately so the subcondition is clearly scoped to same-site
     if (!trustSameSite && !SAFE_METHODS.has(req.method)) {
       return false; // treat same-site as untrusted for state-changing methods
     }
     return true;
   }
   

   1.4. Allow none for user-driven top-level navigations (bookmarks, typed URLs, explicit form submits) where appropriate.

2. If Sec-Fetch-* headers are absent: choose a fallback based on risk and compatibility requirements: 2.1. Fail-safe (recommended for sensitive endpoints): treat absence as unknown and block the request. 2.2. Fail-open (compatibility-first): fallback to (standard origin verification, CSRF tokens, and/or require additional validation).

3. Additional options

   3.1 To ensure that your site can still be linked from other sites, you have to allow simple (HTTP GET) top-level navigation.

   if (req.get('Sec-Fetch-Mode') === 'navigate' &&
       req.method === 'GET' &&
       req.get('Sec-Fetch-Dest') !== 'object' &&
       req.get('Sec-Fetch-Dest') !== 'embed') {
     return true; // Allow this request
   }
   

   3.2 Whitelist explicit cross-origin flows. If certain endpoints intentionally accept cross-origin requests (CORS JSON APIs, third-party integrations, webhooks), explicitly exempt those endpoints from the global Sec-Fetch deny policy and secure them with proper CORS configuration, authentication, and logging.

Requirements

• Your application must be served over trustworthy URLs. Fetch Metadata request headers are only sent to potentially trustworthy URLs. In practice, this includes https, wss, file, and localhost (including 127.0.0.0/8 and ::1/128). See the W3C Secure Contexts spec for full details.
• HTTPS must be enforced across the entire application. This ensures consistent inclusion of Fetch Metadata headers. Enabling HTTP Strict Transport Security (HSTS) helps achieve this by automatically upgrading all HTTP requests to HTTPS.
• Safe HTTP methods should not be used for state-changing requests.

Concerns

• Prerender/prefetch and other speculative navigation may send Sec-Fetch-* values that don’t match the final navigation, and browser-initiated flows (e.g., PaymentRequest) could generate requests without predictable fetch-metadata headers. These behaviors are still being refined, so header propagation isn’t fully stable across all navigation types.
• Intermediaries (proxies, gateways, load balancers) may remove or modify Origin and Sec-* headers — whether due to privacy filters, network optimizations, or simple misconfiguration — which can break fetch-metadata-based protections. This kind of header stripping is problematic, but common.

Rollout & testing recommendations

• Include an appropriate Vary header, in order to ensure that caches handle the response appropriately. For example, Vary: Sec-Fetch-Site, Origin. See more Fetch Metadata specification.
  • Note that the Vary header does not impact CSRF defenses in any way. It is a response header, so it is applied after the server has already made its allow/deny decision based on CSRF protections. Its purpose is operational rather than defensive.
  • If the server responds differently based on HTTP headers (e.g., Sec-Fetch-Site, Origin), caches must vary on those headers. Without this, CDNs or proxies may reuse a response generated for a different context, causing broken behavior or contributing to cache-poisoning scenarios. Adding the appropriate Vary header ensures caches keep these responses separate.
• Start in “log only” mode. Record requests that would be blocked and review for false positives before enforcing. This is the safest way to discover legitimate flows that need whitelisting.
• Monitor UA coverage. Track which user agents include Sec-Fetch-* and which don’t; ensure your fallback logic covers missing-header cases. Use metrics to decide when to enforce stricter policies.
• Document exceptions. Keep an explicit list of endpoints whitelisted for cross-origin access.

Disallowing simple requests

When a <form> tag is used to submit data, it sends a "simple" request that browsers do not designate as "to be preflighted". These "simple" requests introduce risk of CSRF because browsers permit them to be sent to any origin. If your application uses <form> tags to submit data anywhere in your client, you will still need to protect them with alternate approaches described in this document such as tokens.

Caveat: Should a browser bug allow custom HTTP headers, or not enforce preflight on non-simple content types, it could compromise your security. Although unlikely, it is prudent to consider this in your threat model. Implementing CSRF tokens adds additional layer of defence and gives developers more control over security of the application.

Disallowing simple content types

For a request to be deemed simple, it must have one of the following content types - application/x-www-form-urlencoded, multipart/form-data or text/plain. Many modern web applications use JSON APIs so would naturally require CORS, however they may accept text/plain which would be vulnerable to CSRF. Therefore a simple mitigation is for the server or API to disallow these simple content types.

Employing Custom Request Headers for AJAX/API

Both the synchronizer token and the double-submit cookie are used to prevent forgery of form data, but they can be tricky to implement and degrade usability. Many modern web applications do not use <form> tags to submit data. A user-friendly defense that is particularly well suited for AJAX or API endpoints is the use of a custom request header. No token is needed for this approach.

In this pattern, the client appends a custom header to requests that require CSRF protection. The header can be any arbitrary key-value pair, as long as it does not conflict with existing headers.

X-CSRF-Token: RANDOM-TOKEN-VALUE

Many popular frameworks use standardized header names for CSRF protection:

• X-CSRF-Token - Ruby on Rails, Laravel, Django
• X-XSRF-Token - AngularJS
• CSRF-Token - Express.js (csurf middleware)
• X-CSRFToken - Django

While any arbitrary header name will work, using one of these standard names can improve compatibility with existing tools and developer expectations.

When handling the request, the API checks for the existence of this header. If the header does not exist, the backend rejects the request as potential forgery. This approach has several advantages:

• UI changes are not required
• no server state is introduced to track tokens

This defense relies on the CORS preflight mechanism which sends an OPTIONS request to verify CORS compliance with the destination server. All modern browsers designate requests with custom headers as "to be preflighted". When the API verifies that the custom header is there, you know that the request must have been preflighted if it came from a browser.

Custom Headers and CORS

Cookies are not set on cross-origin requests (CORS) by default. To enable cookies on an API, you will set Access-Control-Allow-Credentials=true. The browser will reject any response that includes Access-Control-Allow-Origin=* if credentials are allowed. To allow CORS requests, but protect against CSRF, you need to make sure the server only allows a few select origins that you definitively control via the Access-Control-Allow-Origin header. Any cross-origin request from an allowed domain will be able to set custom headers.

As an example, you might configure your backend to allow CORS with cookies from http://www.yoursite.com and http://mobile.yoursite.com, so that the only possible preflight responses are:

Access-Control-Allow-Origin=http://mobile.yoursite.com
Access-Control-Allow-Credentials=true

or

Access-Control-Allow-Origin=http://www.yoursite.com
Access-Control-Allow-Credentials=true

A less secure configuration would be to configure your backend server to allow CORS from all subdomains of your site using a regular expression. If an attacker is able to take over a subdomain (not uncommon with cloud services) your CORS configuration would allow them to bypass the same origin policy and forge a request with your custom header.

Dealing with Client-Side CSRF Attacks (IMPORTANT)

Client-side CSRF is a new variant of CSRF attacks where the attacker tricks the client-side JavaScript code to send a forged HTTP request to a vulnerable target site by manipulating the program's input parameters. Client-side CSRF originates when the JavaScript program uses attacker-controlled inputs, such as the URL, for the generation of asynchronous HTTP requests.

Note: These variants of CSRF are particularly important as they can bypass some of the common anti-CSRF countermeasures like token-based mitigations and SameSite cookies. For example, when synchronizer tokens or custom HTTP request headers are used, the JavaScript program will include them in the asynchronous requests. Also, web browsers will include cookies in same-site request contexts initiated by JavaScript programs, circumventing the SameSite cookie policies.

Client-Side vs. Classical CSRF: In the classical CSRF model, the server-side program is the most vulnerable component, because it cannot distinguish whether the incoming authenticated request was performed intentionally, also known as the confused deputy problem. In the client-side CSR model, the most vulnerable component is the client-side JavaScript program because an attacker can use it to generate arbitrary asynchronous requests by manipulating the request endpoint and/or its parameters. Client-side CSRF is due to an input validation problem and it reintroduces the confused deputy flaw, that is, the server-side won't, again, be able to distinguish if the request was performed intentionally or not.

For more information about client-side CSRF vulnerabilities, see Sections 2 and 5 of this paper, the CSRF chapter of the SameSite wiki, and this post by the Meta Bug Bounty Program.

Client-side CSRF Example

The following code snippet demonstrates a simple example of a client-side CSRF vulnerability.

<script type="text/javascript">
    const csrf_token = document.querySelector("meta[name='csrf-token']").getAttribute("content");

    const ajaxLoad = () => {
        // process the URL hash fragment
        const hashFragment = window.location.hash.slice(1);

        // hash fragment should be of the format: /^(get|post);(.*)$/
        // e.g., https://site.com/index/#post;/profile
        if (hashFragment.length > 0 && hashFragment.includes(';')) {
            const params = hashFragment.match(/^(get|post);(.*)$/);

            if (params && params.length) {
                const requestMethod = params[1];
                const requestEndpoint = params[3];

                fetch(requestEndpoint, {
                    method: requestMethod,
                    headers: {
                        'X-CSRF-Token': csrf_token,
                        // [...]
                    },
                    // [...]
                })
                .then(response => { /* [...] */ })
                .catch(error => console.error('Request failed:', error));
            }
        }
    };

    // trigger the async request on page load - better practice is to use event listeners
    window.addEventListener('DOMContentLoaded', ajaxLoad);
</script>

Vulnerability: In this snippet, the program invokes a function ajaxLoad() upon the page load, which is responsible for loading various webpage elements. The function reads the value of the URL hash fragment (line 4), and extracts two pieces of information from it (i.e., request method and endpoint) to generate an asynchronous HTTP request (lines 11-13). The vulnerability occurs in lines 15-22, when the JavaScript program uses URL fragments to obtain the server-side endpoint for the asynchronous HTTP request (line 15) and the request method. However, both inputs can be controlled by web attackers, who can pick the value of their choosing, and craft a malicious URL containing the attack payload.

Attack: Usually, attackers share a malicious URL with the victim (through elements such as spear-phishing emails) and because the malicious URL appears to be from an honest, reputable (but vulnerable) website, the user often clicks on it. Alternatively, the attackers can create an attack page to abuse browser APIs (e.g., the window.open() API) and trick the vulnerable JavaScript of the target page to send the HTTP request, which closely resembles the attack model of the classical CSRF attacks.

For more examples of client-side CSRF, see this post by the Meta Bug Bounty Program and this USENIX Security paper.

Client-side CSRF Mitigation Techniques

Independent Requests: Client-side CSRF can be prevented when asynchronous requests cannot be generated via attacker controllable inputs, such as the URL, window name, document referrer, and postMessages, to name only a few examples.

Input Validation: Achieving complete isolation between inputs and request parameters may not always be possible depending on the context and functionality. In these cases, input validation checks has to be implemented. These checks should strictly assess the format and choice of the values of the request parameters and decide whether they can only be used in non-state-changing operations (e.g., only allow GET requests and endpoints starting with a predefined prefix).

Predefined Request Data: Another mitigation technique is to store a list of predefined, safe request data in the JavaScript code (e.g., combinations of endpoints, request methods and other parameters that are safe to be replayed). The program can then use a switch parameter in the URL fragment to decide which entry of the list should each JavaScript function use.

Defense In Depth Techniques

SameSite (Cookie Attribute)

SameSite is a cookie attribute (similar to HTTPOnly, Secure etc.) which aims to mitigate CSRF attacks. It is defined in RFC6265bis. This attribute helps the browser decide whether to send cookies along with cross-site requests. Possible values for this attribute are Lax, Strict, or None.

The Strict value will prevent the cookie from being sent by the browser to the target site in all cross-site browsing context, even when following a regular link. For example, if a GitHub-like website uses the Strict value, a logged-in GitHub user who tries to follow a link to a private GitHub project posted on a corporate discussion forum or email, the user will not be able to access the project because GitHub will not receive a session cookie. Since a bank website would not allow any transactional pages to be linked from external sites, so the Strict flag would be most appropriate for banks.

If a website wants to maintain a user's logged-in session after the user arrives from an external link, SameSite's default Lax value provides a reasonable balance between security and usability. If the GitHub scenario above uses a Lax value instead, the session cookie would be allowed when following a regular link from an external website while blocking it in CSRF-prone request methods such as POST. Only cross-site-requests that are allowed in Lax mode have top-level navigations and use safe HTTP methods.

For more details on the SameSite values, check the following section from the rfc.

Example of cookies using this attribute:

Set-Cookie: JSESSIONID=xxxxx; SameSite=Strict
Set-Cookie: JSESSIONID=xxxxx; SameSite=Lax

All modern desktop and mobile browsers support the SameSite attribute. The main exceptions are legacy browsers including Opera Mini (all versions), UC Browser for Android, and older mobile browsers (iOS Safari < 13.2, Android Browser < 97). To track the browsers implementing it and know how the attribute is used, refer to the following service. Chrome implemented SameSite=Lax as the default behavior in 2020, and Firefox and Edge have followed suit. Additionally, the Secure flag is required for cookies that are marked as SameSite=None.

It is important to note that this attribute should be implemented as an additional layer defense in depth concept. This attribute protects the user through the browsers supporting it, and it contains as well 2 ways to bypass it as mentioned in the following section. This attribute should not replace a CSRF Token. Instead, it should co-exist with that token to protect the user in a more robust way.

Using Standard Headers to Verify Origin

There are two steps to this mitigation method, both of which examine an HTTP request header value:

1. Determine the origin that the request is coming from (source origin). Can be done via Origin or Referer headers.
2. Determining the origin that the request is going to (target

…(truncated)