find-FireBullets-AND-TraceAttack-AND-CTakeDamageInfo

Find TraceAttack and CTakeDamageInfo

Locate TraceAttack function and CTakeDamageInfo struct in CS2 server.dll or libserver.so using IDA Pro MCP tools.

Method

1. Search for FireBullets Debug String

Search for the FireBullets debug string in the binary:

mcp__ida-pro-mcp__find_regex pattern="FireBullets"

Expected result: Multiple strings including "FireBullets @ %10f [ %s ]: inaccuracy=%f spread=%f max dispersion=%f mode=%2i vel=%10f seed=%3i %s\n"

2. Find Cross-References to Debug String

Get xrefs to the debug string address:

mcp__ida-pro-mcp__xrefs_to addrs="<string_address>"

The xref should point to a function - this is FireBullets.

3. Decompile FireBullets

Decompile the FireBullets function:

mcp__ida-pro-mcp__decompile addr="<function_addr>"

4. Rename FireBullets Function

mcp__ida-pro-mcp__rename batch={"func": {"addr": "<function_addr>", "name": "FireBullets"}}

5. Locate TraceAttack in FireBullets

Look for the following code pattern in FireBullets that calls TraceAttack:

Windows:

              if ( (unsigned int)sub_18099FAC0(  // <-- This is TraceAttack
                                     *v63,
                                     (__int64)&v76,
                                     (__int64)&v66,
                                     v42,
                                     v43,
                                     4,
                                     v45,
                                     v94,
                                     v49,
                                     v44,
                                     v14,
                                     0LL,
                                     v54,
                                     *(float *)&v87[v48],
                                     a2,
                                     v28,
                                     v107,
                                     a6,
                                     (__int64)v56,
                                     v109) == 1 )
              {
                  // SHA1 verification code follows when result == 1
                  v84 = Plat_FloatTime() + 4294967296.0;
                  v58 = RandomInt(0LL, 0x7FFFFFFFLL);
                  // ...
                  CSHA1::Reset((CSHA1 *)v89);
                  CSHA1::Update((CSHA1 *)v89, &v84, 0x10u);
                  CSHA1::Final((CSHA1 *)v89);

Linux:

              if ( (unsigned int)sub_XXXXXXX(  // <-- This is TraceAttack
                                     ...
                                     ) == 1 )
              {
                  // Similar SHA1 verification pattern

Key identifying features:

• Called from FireBullets with ~20 parameters
• Returns 1 when bullet hits a target
• Followed by SHA1 hashing code for bullet verification
• Called twice in FireBullets (first call checks hit, second call with new seed)

6. Rename TraceAttack Function

mcp__ida-pro-mcp__rename batch={"func": {"addr": "<traceattack_addr>", "name": "TraceAttack"}}

7. Generate and Validate Unique Signature for FireBullets and TraceAttack

ALWAYS Use SKILL /generate-signature-for-function to generate a robust and unique signature for the function.

8. Write IDA Analysis Output as YAML for FireBullets and TraceAttack

ALWAYS Use SKILL /write-func-as-yaml to write the analysis results.

Required parameters:

• func_name: TraceAttack
• func_addr: The TraceAttack function address
• func_sig: The validated signature from step 7

9. Locate CTakeDamageInfo::HitGroupInfo in TraceAttack

Decompile TraceAttack and look for the damage processing loop near the end of the function:

Windows:

  v104 = 0;
  if ( v184 > 0 )
  {
    v105 = v132;
    v106 = 0LL;
    do
    {
      // Get pTakeDamageInfo structure (480 bytes per entry)
      pTakeDamageInfo = (__int64)&v187[v106];

      // HitGroupInfo is at offset 288 from entry start
      HitGroupInfo = &v108[v106 + 288];
      v110 = (_QWORD *)*((_QWORD *)HitGroupInfo + 1);

      // Set CTakeDamageInfo::HitGroupInfo at offset 0x68 (104)
      *(_QWORD *)(pTakeDamageInfo + 104) = HitGroupInfo;

      // Call damage functions
      sub_1803C8520(v110, pTakeDamageInfo, 0LL);  // TakeDamageOld
      sub_1803C9740(pTakeDamageInfo, ...);

      ++v104;
      v106 += 480LL;
    }
    while ( v104 < v184 );
  }

Linux:

  if ( (int)v247 > 0 )
  {
    v195 = 0LL;
    do
    {
      pTakeDamageInfo = (__int64)v121;

      // HitGroupInfo pointer stored at offset 104 (0x68)
      *(_QWORD *)(pTakeDamageInfo + 104) = v128;

      // Call damage functions
      sub_C8A650(v127, (__int64)v196, 0LL, v125, v52.m128_f32[0]);
      sub_C8ADC0(v196, pTakeDamageInfo + 408, pTakeDamageInfo + 420, v194);

      v195 += 480LL;
    }
    while ( v120 < (int)v247 );
  }

Key pattern:

• Loop iterates through hit entities
• Each entry is 480 bytes
• pTakeDamageInfo + 104 (0x68) stores the HitGroupInfo pointer

10. Generate Struct Offset Signature and Write Struct Member YAML

For each struct member, ALWAYS generate a dedicated offset_sig first, then write a dedicated YAML file for that member.

For CTakeDamageInfo::HitGroupInfo:

• Offset: 0x68 (size 8)
• Typical instruction pattern from step 9: *(_QWORD *)(pTakeDamageInfo + 104) = HitGroupInfo (104 = 0x68)
• Use SKILL /generate-signature-for-structoffset with:
  • inst_addr: address of the instruction containing offset 0x68
  • struct_offset: 0x68
• Use SKILL /write-structoffset-as-yaml with:
  • struct_name: CTakeDamageInfo
  • member_name: HitGroupInfo
  • offset: 0x68
  • size: 8
  • offset_sig: validated signature from /generate-signature-for-structoffset

Output YAML:

• server.dll → CTakeDamageInfo_HitGroupInfo.windows.yaml
• libserver.so / libserver.so → CTakeDamageInfo_HitGroupInfo.linux.yaml

Function Characteristics

FireBullets

• Size: ~2600-2800 bytes
• Parameters: (int, __int64, __int64, __int64*, __int64, int, int, ...)
• Purpose: Main bullet firing function, handles accuracy, spread, and calls TraceAttack

TraceAttack

• Size: ~4800-5000 bytes
• Parameters: ~20 parameters including trace info, damage values, entity pointers
• Return: 1 if hit target, 0 otherwise
• Purpose: Performs bullet trace and applies damage to hit entities

Platform Differences