Lexical Structure

Lexical Structure

Use the lowest-level components of the syntax.

The lexical structure of Swift describes what sequence of characters form valid tokens of the language. These valid tokens form the lowest-level building blocks of the language and are used to describe the rest of the language in subsequent chapters. A token consists of an identifier, keyword, punctuation, literal, or operator.

In most cases, tokens are generated from the characters of a Swift source file by considering the longest possible substring from the input text, within the constraints of the grammar that are specified below. This behavior is referred to as longest match or maximal munch.

Whitespace and Comments

Whitespace has two uses: to separate tokens in the source file and to distinguish between prefix, postfix, and infix operators (see doc:LexicalStructure#Operators), but is otherwise ignored. The following characters are considered whitespace: space (U+0020), line feed (U+000A), carriage return (U+000D), horizontal tab (U+0009), vertical tab (U+000B), form feed (U+000C) and null (U+0000).

Comments are treated as whitespace by the compiler. Single line comments begin with // and continue until a line feed (U+000A) or carriage return (U+000D). Multiline comments begin with /* and end with */. Nesting multiline comments is allowed, but the comment markers must be balanced.

Comments can contain additional formatting and markup, as described in Markup Formatting Reference.

Grammar of whitespace:

whitespace → whitespace-item whitespace?
whitespace-item → line-break
whitespace-item → inline-space
whitespace-item → comment
whitespace-item → multiline-comment
whitespace-item → U+0000, U+000B, or U+000C

line-break → U+000A
line-break → U+000D
line-break → U+000D followed by U+000A

inline-spaces → inline-space inline-spaces?
inline-space → U+0009 or U+0020

comment → // comment-text line-break
multiline-comment → /* multiline-comment-text */

comment-text → comment-text-item comment-text?
comment-text-item → Any Unicode scalar value except U+000A or U+000D

multiline-comment-text → multiline-comment-text-item multiline-comment-text?
multiline-comment-text-item → multiline-comment
multiline-comment-text-item → comment-text-item
multiline-comment-text-item → Any Unicode scalar value except /* or */

Identifiers

Identifiers begin with an uppercase or lowercase letter A through Z, an underscore (_), a noncombining alphanumeric Unicode character in the Basic Multilingual Plane, or a character outside the Basic Multilingual Plane that isn't in a Private Use Area. After the first character, digits and combining Unicode characters are also allowed.

Treat identifiers that begin with an underscore, subscripts whose first argument label begins with an underscore, and initializers whose first argument label begins with an underscore, as internal, even if their declaration has the public access-level modifier. This convention lets framework authors mark part of an API that clients must not interact with or depend on, even though some limitation requires the declaration to be public. In addition, identifiers that begin with two underscores are reserved for the Swift compiler and standard library.

To use a reserved word as an identifier, put a backtick (`) before and after it. For example, class isn't a valid identifier, but `class` is valid. The backticks aren't considered part of the identifier; `x` and x have the same meaning.

Inside a closure with no explicit parameter names, the parameters are implicitly named $0, $1, $2, and so on. These names are valid identifiers within the scope of the closure.

The compiler synthesizes identifiers that begin with a dollar sign ($) for properties that have a property wrapper projection. Your code can interact with these identifiers, but you can't declare identifiers with that prefix. For more information, see the doc:Attributes#propertyWrapper section of the doc:Attributes chapter.

Grammar of an identifier:

identifier → identifier-head identifier-characters?
identifier → `** *identifier-head* *identifier-characters*_?_ **`
identifier → implicit-parameter-name
identifier → property-wrapper-projection
identifier-list → identifier | identifier , identifier-list

identifier-head → Upper- or lowercase letter A through Z
identifier-head → _
identifier-head → U+00A8, U+00AA, U+00AD, U+00AF, U+00B2–U+00B5, or U+00B7–U+00BA
identifier-head → U+00BC–U+00BE, U+00C0–U+00D6, U+00D8–U+00F6, or U+00F8–U+00FF
identifier-head → U+0100–U+02FF, U+0370–U+167F, U+1681–U+180D, or U+180F–U+1DBF
identifier-head → U+1E00–U+1FFF
identifier-head → U+200B–U+200D, U+202A–U+202E, U+203F–U+2040, U+2054, or U+2060–U+206F
identifier-head → U+2070–U+20CF, U+2100–U+218F, U+2460–U+24FF, or U+2776–U+2793
identifier-head → U+2C00–U+2DFF or U+2E80–U+2FFF
identifier-head → U+3004–U+3007, U+3021–U+302F, U+3031–U+303F, or U+3040–U+D7FF
identifier-head → U+F900–U+FD3D, U+FD40–U+FDCF, U+FDF0–U+FE1F, or U+FE30–U+FE44
identifier-head → U+FE47–U+FFFD
identifier-head → U+10000–U+1FFFD, U+20000–U+2FFFD, U+30000–U+3FFFD, or U+40000–U+4FFFD
identifier-head → U+50000–U+5FFFD, U+60000–U+6FFFD, U+70000–U+7FFFD, or U+80000–U+8FFFD
identifier-head → U+90000–U+9FFFD, U+A0000–U+AFFFD, U+B0000–U+BFFFD, or U+C0000–U+CFFFD
identifier-head → U+D0000–U+DFFFD or U+E0000–U+EFFFD

identifier-character → decimal-digit
identifier-character → U+0300–U+036F, U+1DC0–U+1DFF, U+20D0–U+20FF, or U+FE20–U+FE2F
identifier-character → identifier-head
identifier-characters → identifier-character identifier-characters?

implicit-parameter-name → $ decimal-digits
property-wrapper-projection → $ identifier-characters

Keywords and Punctuation

The following keywords are reserved and can't be used as identifiers, unless they're escaped with backticks, as described above in doc:LexicalStructure#Identifiers. Keywords other than inout, var, and let can be used as parameter names in a function declaration or function call without being escaped with backticks. When a member has the same name as a keyword, references to that member don't need to be escaped with backticks, except when there's ambiguity between referring to the member and using the keyword --- for example, self, Type, and Protocol have special meaning in an explicit member expression, so they must be escaped with backticks in that context.

• Keywords used in declarations: associatedtype, borrowing, class, consuming, deinit, enum, extension, fileprivate, func, import, init, inout, internal, let, nonisolated, open, operator, precedencegroup, private, protocol, public, rethrows, static, struct, subscript, typealias, and var.

• Keywords used in statements: break, case, catch, continue, default, defer, do, else, fallthrough, for, guard, if, in, repeat, return, switch, throw, where, and while.
• Keywords used in expressions and types: Any, as, await, catch, false, is, nil, rethrows, self, Self, super, throw, throws, true, and try.
• Keywords used in patterns: _.
• Keywords that begin with a number sign (#): #available, #colorLiteral, #else, #elseif, #endif, #fileLiteral, #if, #imageLiteral, #keyPath, #selector, #sourceLocation, #unavailable.

Note: Prior to Swift 5.9, the following keywords were reserved: #column, #dsohandle, #error, #fileID, #filePath, #file, #function, #line, and #warning. These are now implemented as macros in the Swift standard library: column, dsohandle, error(_:), fileID, filePath, file, function, line, and warning(_:).

• Keywords reserved in particular contexts: associativity, async, convenience, didSet, dynamic, final, get, indirect, infix, lazy, left, mutating, none, nonmutating, optional, override, package, postfix, precedence, prefix, Protocol, required, right, set, some, Type, unowned, weak, and willSet. Outside the context in which they appear in the grammar, they can be used as identifiers.

The following tokens are reserved as punctuation and can't be used as custom operators: (, ), {, }, [, ], ., ,, :, ;, =, @, #, & (as a prefix operator), ->, `, ?, and ! (as a postfix operator).

Literals

A literal is the source code representation of a value of a type, such as a number or string.

The following are examples of literals:

42               // Integer literal
3.14159          // Floating-point literal
"Hello, world!"  // String literal
/Hello, .*/      // Regular expression literal
true             // Boolean literal

A literal doesn't have a type on its own. Instead, a literal is parsed as having infinite precision and Swift's type inference attempts to infer a type for the literal. For example, in the declaration let x: Int8 = 42, Swift uses the explicit type annotation (: Int8) to infer that the type of the integer literal 42 is Int8. If there isn't suitable type information available, Swift infers that the literal's type is one of the default literal types defined in the Swift standard library and listed in the table below. When specifying the type annotation for a literal value, the annotation's type must be a type that can be instantiated from that literal value. That is, the type must conform to the Swift standard library protocols listed in the table below.

For example, in the declaration let str = "Hello, world", the default inferred type of the string literal "Hello, world" is String. Also, Int8 conforms to the ExpressibleByIntegerLiteral protocol, and therefore it can be used in the type annotation for the integer literal 42 in the declaration let x: Int8 = 42.

Grammar of a literal:

literal → numeric-literal | string-literal | regular-expression-literal | boolean-literal | nil-literal

numeric-literal → signed-integer-literal | signed-floating-point-literal
boolean-literal → true | false
nil-literal → nil

Integer Literals

Integer literals represent integer values of unspecified precision. By default, integer literals are expressed in decimal; you can specify an alternate base using a prefix. Binary literals begin with 0b, octal literals begin with 0o, and hexadecimal literals begin with 0x.

Decimal literals contain the digits 0 through 9. Binary literals contain 0 and 1, octal literals contain 0 through 7, and hexadecimal literals contain 0 through 9 as well as A through F in upper- or lowercase.

Negative integers literals are expressed by prepending a minus sign (-) to an integer literal, as in -42.

Underscores (_) are allowed between digits for readability, but they're ignored and therefore don't affect the value of the literal. Integer literals can begin with leading zeros (0), but they're likewise ignored and don't affect the base or value of the literal.

Unless otherwise specified, the default inferred type of an integer literal is the Swift standard library type Int. The Swift standard library also defines types for various sizes of signed and unsigned integers, as described in doc:TheBasics#Integers.

Grammar of an integer literal:

signed-integer-literal → -? integer-literal integer-literal → binary-literal
integer-literal → octal-literal
integer-literal → decimal-literal
integer-literal → hexadecimal-literal

binary-literal → 0b binary-digit binary-literal-characters?
binary-digit → Digit 0 or 1
binary-literal-character → binary-digit | _
binary-literal-characters → binary-literal-character binary-literal-characters?

octal-literal → 0o octal-digit octal-literal-characters?
octal-digit → Digit 0 through 7
octal-literal-character → octal-digit | _
octal-literal-characters → octal-literal-character octal-literal-characters?

decimal-literal → decimal-digit decimal-literal-characters?
decimal-digit → Digit 0 through 9
decimal-digits → decimal-digit decimal-digits?
decimal-literal-character → decimal-digit | _
decimal-literal-characters → decimal-literal-character decimal-literal-characters?

hexadecimal-literal → 0x hexadecimal-digit hexadecimal-literal-characters?
hexadecimal-digit → Digit 0 through 9, a through f, or A through F
hexadecimal-literal-character → hexadecimal-digit | _
hexadecimal-literal-characters → hexadecimal-literal-character hexadecimal-literal-characters?

Floating-Point Literals

Floating-point literals represent floating-point values of unspecified precision.

By default, floating-point literals are expressed in decimal (with no prefix), but they can also be expressed in hexadecimal (with a 0x prefix).

Decimal floating-point literals consist of a sequence of decimal digits followed by either a decimal fraction, a decimal exponent, or both. The decimal fraction consists of a decimal point (.) followed by a sequence of decimal digits. The exponent consists of an upper- or lowercase e prefix followed by a sequence of decimal digits that indicates what power of 10 the value preceding the e is multiplied by. For example, 1.25e2 represents 1.25 x 10², which evaluates to 125.0. Similarly, 1.25e-2 represents 1.25 x 10⁻², which evaluates to 0.0125.

Hexadecimal floating-point literals consist of a 0x prefix, followed by an optional hexadecimal fraction, followed by a hexadecimal exponent. The hexadecimal fraction consists of a decimal point followed by a sequence of hexadecimal digits. The exponent consists of an upper- or lowercase p prefix followed by a sequence of decimal digits that indicates what power of 2 the value preceding the p is multiplied by. For example, 0xFp2 represents 15 x 2², which evaluates to 60. Similarly, 0xFp-2 represents 15 x 2⁻², which evaluates to 3.75.

Negative floating-point literals are expressed by prepending a minus sign (-) to a floating-point literal, as in -42.5.

Underscores (_) are allowed between digits for readability, but they're ignored and therefore don't affect the value of the literal. Floating-point literals can begin with leading zeros (0), but they're likewise ignored and don't affect the base or value of the literal.

Unless otherwise specified, the default inferred type of a floating-point literal is the Swift standard library type Double, which represents a 64-bit floating-point number. The Swift standard library also defines a Float type, which represents a 32-bit floating-point number.

Grammar of a floating-point literal:

signed-floating-point-literal → > -? floating-point-literal floating-point-literal → decimal-literal decimal-fraction? decimal-exponent?
floating-point-literal → hexadecimal-literal hexadecimal-fraction? hexadecimal-exponent

decimal-fraction → . decimal-literal
decimal-exponent → floating-point-e sign? decimal-literal

hexadecimal-fraction → . hexadecimal-digit hexadecimal-literal-characters?
hexadecimal-exponent → floating-point-p sign? decimal-literal

floating-point-e → e | E
floating-point-p → p | P
sign → + | -

String Literals

A string literal is a sequence of characters surrounded by quotation marks. A single-line string literal is surrounded by double quotation marks and has the following form:

"<#characters#>"

String literals can't contain an unescaped double quotation mark ("), an unescaped backslash (\), a carriage return, or a line feed.

A multiline string literal is surrounded by three double quotation marks and has the following form:

"""
<#characters#>
"""

Unlike a single-line string literal, a multiline string literal can contain unescaped double quotation marks ("), carriage returns, and line feeds. It can't contain three unescaped double quotation marks next to each other.

The line break after the """ that begins the multiline string literal isn't part of the string. The line break before the """ that ends the literal is also not part of the string. To make a multiline string literal that begins or ends with a line feed, write a blank line as its first or last line.

A multiline string literal can be indented using any combination of spaces and tabs; this indentation isn't included in the string. The """ that ends the literal determines the indentation: Every nonblank line in the literal must begin with exactly the same indentation that appears before the closing """; there's no conversion between tabs and spaces. You can include additional spaces and tabs after that indentation; those spaces and tabs appear in the string.

Line breaks in a multiline string literal are normalized to use the line feed character. Even if your source file has a mix of carriage returns and line feeds, all of the line breaks in the string will be the same.

In a multiline string literal, writing a backslash (\) at the end of a line omits that line break from the string. Any whitespace between the backslash and the line break is also omitted. You can use this syntax to hard wrap a multiline string literal in your source code, without changing the value of the resulting string.

Special characters can be included in string literals of both the single-line and multiline forms using the following escape sequences:

• Null character (\0)
• Backslash (\\)
• Horizontal tab (\t)
• Line feed (\n)
• Carriage return (\r)
• Double quotation mark (\")
• Single quotation mark (')
• Unicode scalar (\u{n}), where n is a hexadecimal number that has one to eight digits

The value of an expression can be inserted into a string literal by placing the expression in parentheses after a backslash (\). The interpolated expression can contain a string literal, but can't contain an unescaped backslash, a carriage return, or a line feed.

For example, all of the following string literals have the same value:

"1 2 3"
"1 2 \("3")"
"1 2 \(3)"
"1 2 \(1 + 2)"
let x = 3; "1 2 \(x)"

A string delimited by extended delimiters is a sequence of characters surrounded by quotation marks and a balanced set of one or more number signs (#). A string delimited by extended delimiters has the following forms:

#"<#characters#>"#

#"""
<#characters#>
"""#

Special characters in a string delimited by extended delimiters appear in the resulting string as normal characters rather than as special characters. You can use extended delimiters to create strings with characters that would ordinarily have a special effect such as generating a string interpolation, starting an escape sequence, or terminating the string.

The following example shows a string literal and a string delimited by extended delimiters that create equivalent string values:

let string = #"\(x) \ " \u{2603}"#
let escaped = "\\(x) \\ \" \\u{2603}"
print(string)
// Prints "\(x) \ " \u{2603}".
print(string == escaped)
// Prints "true".

If you use more than one number sign to form a string delimited by extended delimiters, don't place whitespace in between the number signs:

print(###"Line 1\###nLine 2"###) // OK
print(# # #"Line 1\# # #nLine 2"# # #) // Error

Multiline string literals that you create using extended delimiters have the same indentation requirements as regular multiline string literals.

The default inferred type of a string literal is String. For more information about the String type, see doc:StringsAndCharacters and String.

String literals that are concatenated by the + operator are concatenated at compile time. For example, the values of textA and textB in the example below are identical --- no runtime concatenation is performed.

let textA = "Hello " + "world"
let textB = "Hello world"

Grammar of a string literal:

string-literal → static-string-literal | interpolated-string-literal

string-literal-opening-delimiter → extended-string-literal-delimiter? "
string-literal-closing-delimiter → " extended-string-literal-delimiter?

static-string-literal → string-literal-opening-delimiter quoted-text? string-literal-closing-delimiter
static-string-literal → multiline-string-literal-opening-delimiter multiline-quoted-text? multiline-string-literal-closing-delimiter

multiline-string-literal-opening-delimiter → extended-string-literal-delimiter? """
multiline-string-literal-closing-delimiter → """ extended-string-literal-delimiter?
extended-string-literal-delimiter → # extended-string-literal-delimiter?

quoted-text → quoted-text-item quoted-text?
quoted-text-item → escaped-character
quoted-text-item → Any Unicode scalar value except ", \, U+000A, or U+000D

multiline-quoted-text → multiline-quoted-text-item multiline-quoted-text?
multiline-quoted-text-item → escaped-character
multiline-quoted-text-item → Any Unicode scalar value except \
multiline-quoted-text-item → escaped-newline

interpolated-string-literal → string-literal-opening-delimiter interpolated-text? string-literal-closing-delimiter
interpolated-string-literal → multiline-string-literal-opening-delimiter multiline-interpolated-text? multiline-string-literal-closing-delimiter

interpolated-text → interpolated-text-item interpolated-text?
interpolated-text-item → \( expression ) | quoted-text-item

multiline-interpolated-text → multiline-interpolated-text-item multiline-interpolated-text?
multiline-interpolated-text-item → \( expression ) | multiline-quoted-text-item

escape-sequence → \** *extended-string-literal-delimiter*
*escaped-character* → *escape-sequence* **0** | *escape-sequence* **\ | escape-sequence t | escape-sequence n | escape-sequence r | escape-sequence " | escape-sequence '
escaped-character → escape-sequence u { unicode-scalar-digits }
unicode-scalar-digits → Between one and eight hexadecimal digits

escaped-newline → escape-sequence inline-spaces? line-break

Regular Expression Literals

A regular expression literal is a sequence of characters surrounded by slashes (/) with the following form:

/<#regular expression#>/

Regular expression literals must not begin with an unescaped tab or space, and they can't contain an unescaped slash (/), a carriage return, or a line feed.

Within a regular expression literal, a backslash is understood as a part of that regular expression, not just as an escape character like in string literals. It indicates that the following special character should be interpreted literally, or that the following nonspecial character should be interpreted in a special way. For example, /\(/ matches a single left parenthesis and /\d/ matches a single digit.

A regular expression literal delimited by extended delimiters is a sequence of characters surrounded by slashes (/) and a balanced set of one or more number signs (#). A regular expression literal delimited by extended delimiters has the following forms:

#/<#regular expression#>/#

#/
<#regular expression#>
/#

A regular expression literal that uses extended delimiters can begin with an unescaped space or tab, contain unescaped slashes (/), and span across multiple lines. For a multiline regular expression literal, the opening delimiter must be at the end of a line, and the closing delimiter must be on its own line. Inside a multiline regular expression literal, the extended regular expression syntax is enabled by default --- specifically, whitespace is ignored and comments are allowed.

If you use more than one number sign to form a regular expression literal delimited by extended delimiters, don't place whitespace in between the number signs:

let regex1 = ##/abc/##       // OK
let regex2 = # #/abc/# #     // Error

If you need to make an empty regular expression literal, you must use the extended delimiter syntax.

Grammar of a regular expression literal:

regular-expression-literal → regular-expression-literal-opening-delimiter regular-expression regular-expression-literal-closing-delimiter
regular-expression → Any regular expression

regular-expression-literal-opening-delimiter → extended-regular-expression-literal-delimiter? /
regular-expression-literal-closing-delimiter → / extended-regular-expression-literal-delimiter?

extended-regular-expression-literal-delimiter → # extended-regular-expression-literal-delimiter?

Operators

The Swift standard library defines a number of operators for your use, many of which are discussed in doc:BasicOperators and doc:AdvancedOperators. The present section describes which characters can be used to define custom operators.

Custom operators can begin with one of the ASCII characters /, =, -, +, !, *, %, <, >, &, |, ^, ?, or ~, or one of the Unicode characters defined in the grammar below (which include characters from the Mathematical Operators, Miscellaneous Symbols, and Dingbats Unicode blocks, among others). After the first character, combining Unicode characters are also allowed.

You can also define custom operators that begin with a dot (.). These operators can contain additional dots. For example, .+. is treated as a single operator. If an operator doesn't begin with a dot, it can't contain a dot elsewhere. For example, +.+ is treated as the + operator followed by the .+ operator.

Although you can define custom operators that contain a question mark (?), they can't consist of a single question mark character only. Additionally, although operators can contain an exclamation point (!), postfix operators can't begin with either a question mark or an exclamation point.

Note: The tokens =, ->, //, /*, */, ., the prefix operators <, &, and ?, the infix operator ?, and the postfix operators >, !, and ? are reserved. These tokens can't be overloaded, nor can they be used as custom operators.

The whitespace around an operator is used to determine whether an operator is used as a prefix operator, a postfix operator, or an infix operator. This behavior has the following rules:

• If an operator has whitespace around both sides or around neither side, it's treated as an infix operator. As an example, the +++ operator in a+++b and a +++ b is treated as an infix operator.
• If an operator has whitespace on the left side only, it's treated as a prefix unary operator. As an example, the +++ operator in a +++b is treated as a prefix unary operator.
• If an operator has whitespace on the right side only, it's treated as a postfix unary operator. As an example, the +++ operator in a+++ b is treated as a postfix unary operator.
• If an operator has no whitespace on the left but is followed immediately by a dot (.), it's treated as a postfix unary operator. As an example, the +++ operator in a+++.b is treated as a postfix unary operator (a+++ .b rather than a +++ .b).

For the purposes of these rules, the characters (, [, and { before an operator, the characters ), ], and } after an operator, and the characters ,, ;, and : are also considered whitespace.

If the ! or ? predefined operator has no whitespace on the left, it's treated as a postfix operator, regardless of whether it has whitespace on the right. To use the ? as the optional-chaining operator, it must not have whitespace on the left. To use it in the ternary conditional (? :) operator, it must have whitespace around both sides.

If one of the arguments to an infix operator is a regular expression literal, then the operator must have whitespace around both sides.

In certain constructs, operators with a leading < or > may be split into two or more tokens. The remainder is treated the same way and may be split again. As a result, you don't need to add whitespace t

…(truncated)