Eventmodeling Designing Event Models

Designing Event Models

Interview Phase (Optional)

When to Interview: Skip if the user has specified: stream identity strategy, command-specific state needs, and read model requirements. Interview when stream boundaries or state design are unclear.

Interview Strategy: Establish stream identity and per-command state boundaries before designing. Ambiguous boundaries are the primary cause of the DDD aggregate anti-pattern appearing in event-sourced models.

Critical Questions

1. Stream Identity (Impact: Determines how events are grouped into streams)

   • Question: "What's the entity that owns events? (e.g., orderId, reviewId, customerId) What's the lifetime? Single transaction or years?"
   • Why it matters: Wrong stream identity causes design problems; correct identity keeps streams appropriately scoped
   • Follow-up triggers: If multiple candidates → ask "Which entity's identity would you use to load events for a single command decision?"

2. Minimal State vs Bundled State (Impact: Prevents DDD aggregate anti-pattern)

   • Question: "Will different commands need different state? Or does every command need the same full state?"
   • Why it matters: Each command should have minimal, command-specific state—not bundled DDD aggregates
   • Follow-up triggers: If "same full state" → walk through two commands and ask what each actually reads during validation

Interview Flow

Conditional Entry:

If user has provided:
  - Stream identity (which entity ID anchors the stream)
  - AND at least two commands with explicitly different state needs documented
  - AND read model requirements (what queries the UI or processors make)

Then: Skip interview, proceed directly to design

Else: Conduct interview

Phase 1: Stream Boundaries (Question 1)

• Confirm which entity anchors the stream
• Establish stream lifetime expectations
• Identify whether multiple candidate roots exist and resolve them

Phase 2: State Design (Question 2)

• Confirm per-command state isolation
• Identify whether DDD aggregate thinking is present upfront
• Establish minimal state shapes for at least two commands

Capturing Interview Findings

Append findings to the project's event modeling file:

File: .trogonai/interviews/[project-name]/EVENTMODELING.md

Use Write tool to add/update this section:

## Designing Event Models (eventmodeling-designing-event-models)

### Stream Identity
[From Q1: Which entity? What identity key? Lifetime?]

### Per-Command State Decisions
[From Q2: Which commands need different state? Initial minimal state shapes?]

### Design Decisions
- Stream root: [entity name] identified by [id field]
- State isolation: [confirmed / DDD pattern caught and corrected]

Update Interview Trail:

| Design | eventmodeling-designing-event-models | Done | Stream identity, per-command state shapes |

Core Architectural Rule

NEVER use a "DDD Aggregate Root" (bundled state) for command validation Every command handler has its own minimal state projection. What DDD calls an "aggregate root" is actually a read model, not command-validation state.

 WRONG: Using DDD Aggregate as command state
OrderAggregate { orderId, customerId, items[], total, status, paymentId, address, shippedAt, cancelledAt, ... }
    ↑ This is a READ MODEL, not command state
    ↓ NEVER use for command validation
  handleConfirmOrder(OrderAggregate)
  handleShipOrder(OrderAggregate)
  handleCancelOrder(OrderAggregate)

 CORRECT: Minimal state per command
ConfirmOrderState { status, orderId }
    ↓
  handleConfirmOrder(ConfirmOrderState)

ShipOrderState { status, orderId, paymentId }
    ↓
  handleShipOrder(ShipOrderState)

CancelOrderState { status, orderId, createdAt }
    ↓
  handleCancelOrder(CancelOrderState)

OrderSummaryView { orderId, customerId, items[], total, status, paymentId, ... }
    ↑ This is for UI queries, NOT command validation

Purpose

Converts domain analysis into the event sourcing architecture pattern:

UI/Processor → Command → [Command State Read Model] → Event → Query Read Models - UI/Processor: Entry points that trigger intent

• Command: Intent data (can be rejected)
• Stream Root: Logical grouping of immutable events (NOT a DDD aggregate bundle)
• Command State Read Model: Minimal projection derived from events, optimized for this specific command's validation. Each command gets its own read model interface. Different commands = different shapes. (Categorized as "Command State" for semantic clarity)
• Event: Result of successful command (immutable fact: command data + implicit context)
• Query Read Models: Rich projections of events optimized for UI/Processor queries. Separate from command state. (Categorized as "Query Models" for semantic clarity)

Workflow

Given a domain analysis, design a complete event-sourced model:

1. Design Event Streams

Events are the immutable source of truth. Each stream holds facts about one entity:

• Stream Name: Entity type + identity (Order:order-123)
• Event Type: What changed? (past tense: Created, Confirmed, Shipped)
• Event Data: Combines command input + implicit stream state facts
• Causality: Triggered by which command?

Format:

Stream: Order:order-123

Events (chronological):
1. OrderCreated
   Triggered by: CreateOrder command
   Data: customerId, items[], total, shippingAddress, createdAt
   (from command: customerId, items[], shippingAddress)
   (implicit: total calculated from items)

2. OrderConfirmed
   Triggered by: ConfirmOrder command
   Data: paymentId, confirmedAt
   (from command: paymentId)
   (implicit: orderId from stream, previous status verified)

3. OrderShipped
   Triggered by: ShipOrder command
   Data: shipmentId, shippedAt
   (from command: shipmentId)
   (implicit: orderId, confirmed status verified)

Key Rules:

• Events are immutable facts from successful commands
• Event data = command input + implicit stream state context
• Stream identity is explicit (Order:order-123)
• Event order matters for state reconstruction
• Never modify or delete events
• Events only exist if command succeeded

2. Design Command State Read Models (Minimal Per-Command)

Critical Rule: Each command must have its own read model (command state). NEVER share read models between commands. Naming Convention (for Automation):

• [CommandName]State = Implemented command state read model
• [CommandName]StateToDo = Planned command state read model (marked for implementation)

Examples:

• PublishReviewState = implemented
• EditReviewStateToDo = planned, needs implementation
• SellerRespondState = implemented

Semantic Categorization: These are read models, but categorized as "Command State" based on their purpose (command validation, not UI queries).

Command state read models are derived from events and minimal:

• Read only events needed for a specific command's decision
• Build state by replaying only relevant events
• ENFORCEMENT: Different commands = different read model interfaces. Period.
• Each command handler defines what state projection it needs (and ONLY what it needs)
• Projection can be regenerated from events at any time

Example for Order stream with separate command state read model for EACH command:

## ConfirmOrder Command (IMPLEMENTED)
State interface: ConfirmOrderState { status, orderId }
Builder: buildConfirmOrderState(events)
Naming: [CommandName]State = implemented
- OrderCreated event → Set status='Draft'
- OrderConfirmed event → Set status='Confirmed'
(SKIP: items, total, shipping - not needed for this command)

## ShipOrder Command (IMPLEMENTED)
State interface: ShipOrderState { status, orderId, paymentId }
Builder: buildShipOrderState(events)
Naming: [CommandName]State = implemented
(DIFFERENT from ConfirmOrderState)
- OrderCreated event → (skip)
- OrderConfirmed event → Set status='Confirmed', set paymentId
- OrderShipped event → Set status='Shipped'

## CancelOrder Command (PLANNED - NOT IMPLEMENTED)
State interface: CancelOrderStateToDo { status, orderId, createdAt }
Builder: buildCancelOrderStateToDo(events) [STUB - TODO]
Naming: [CommandName]StateToDo = planned, needs implementation
(DIFFERENT from both above)
- OrderCreated event → Set status='Draft', createdAt
- OrderCancelled event → Set status='Cancelled'

Enforcement Rule:

• ConfirmOrderState used ONLY by handleConfirmOrder
• ShipOrderState used ONLY by handleShipOrder
• NEVER share state between commands
• NEVER create a single "OrderState" for all Order commands

This is NOT a full aggregate state bundle—it's minimal, command-specific state access.

3. Design Commands

Commands are intent data from UI or Processor:

• Represent what user/system wants to do
• Can be rejected (validation failure)
• Only UI or Processor can issue commands
• Load current stream state for validation
• Produce events if valid, or reject if invalid

Format:

Command: ConfirmOrder
Source: UI or Processor (only these can issue)
Input: orderId, paymentId

Processing:
    1. Load current state from Order:orderId stream
    2. Validate preconditions:
       - state.status === 'Draft' (reject: already confirmed)
       - paymentId is valid (reject: invalid payment)
    3. If all valid:
       - Produce: OrderConfirmed event
         - Data: paymentId, confirmedAt
         - Implicit: orderId (from stream), previous status (from state)
    4. If any validation fails:
       - Reject: return error (no event created)

Outcomes:
     Success: OrderConfirmed event appended to stream
     Rejection: Error returned, no event created

Key Rules:

• Only UI or Processor can issue commands (entry points)
• One command per UI/Processor action
• Commands validate against stream state
• Successful command → Event(s) created
• Failed validation → Command rejected, no event
• Commands are synchronous decision logic (pure)

4. Design Read Models

Read models are projections of events for UI/Processor queries:

• Built from events (only source is events)
• Optimized for specific query patterns
• Consumed by UI or Processor (for display/decision)
• Can be regenerated from events anytime

Format:

ReadModel: OrderSummaryView
Purpose: UI displays customer order list, Processor checks order status

Subscribed to events:
  - OrderCreated
  - OrderConfirmed
  - OrderShipped
  - OrderCancelled

Data (optimized for queries):
  {
    orderId: string
    customerId: string
    total: number
    status: string
    createdAt: Date
    confirmedAt?: Date
    shippedAt?: Date
  }

Update from events:
  - OrderCreated → Insert row (id, customer, total, status='Draft')
  - OrderConfirmed → Update status='Confirmed', set confirmedAt
  - OrderShipped → Update status='Shipped', set shippedAt
  - OrderCancelled → Update status='Cancelled'

Consumed by:
  - UI: displays list of orders
  - Processor: checks if order can be shipped

5. Document Event Causality

Show how events relate to each other:

Command Flow:
CreateOrder command
    → OrderCreated event
       ↓ (may trigger external process)
ConfirmOrder command (reads OrderCreated state)
    → OrderConfirmed event
       ↓ (may trigger)
ShipOrder command (reads OrderCreated + OrderConfirmed state)
    → OrderShipped event

6. Document State Transitions

Show valid state transitions:

Order Stream State Transitions:

Initial state: (empty stream)
  ↓
CreateOrder → OrderCreated
  ↓
State: Draft

Draft state:
  → ConfirmOrder → OrderConfirmed → State: Confirmed
  → CancelOrder → OrderCancelled → State: Cancelled

Confirmed state:
  → ShipOrder → OrderShipped → State: Shipped
  → CancelOrder (rejected - already confirmed)

Shipped state:
  → No more transitions allowed

Output Format

Present complete model as:

# Event Model: [Domain]

## Event Streams

### Stream: Order

**Identity**: orderId

**Events**:
- OrderCreated: Initial event creating the order
Data: customerId, items[], total, shippingAddress

- OrderConfirmed: Payment confirmed
Data: paymentId, confirmedAt

- OrderShipped: Order shipped
Data: shipmentId, shippedAt

- OrderCancelled: Order cancelled
Data: cancelledAt, reason

**State Projection (Human Example)**:
For the ConfirmOrder command, we need minimal state:
```text
ConfirmOrderState:
  - orderId: 'order-123'
  - status: 'Draft'

For the ShipOrder command, we need different data:

ShipOrderState:
  - orderId: 'order-123'
  - status: 'Confirmed'
  - paymentId: 'payment-456'

Commands

Command: CreateOrder

• Input: customerId, items[], shippingAddress
• Validation: Items valid, customerId exists
• Events produced: OrderCreated
• Possible outcomes: Success (OrderCreated) or Validation error

Command: ConfirmOrder

• Input: orderId, paymentId
• Validation: Order in Draft status, payment validated
• Events produced: OrderConfirmed
• Possible outcomes: Success or "Already confirmed" error

Read Models (Optional)

ReadModel: OrderSummaryView

• Purpose: Quick lookup of order status
• Events: OrderCreated, OrderConfirmed, OrderShipped, OrderCancelled
• Queries served: GetOrder(orderId), ListOrdersByCustomer(customerId)

Implementation Notes

• All state is derived from events
• Commands validate against derived state
• No transaction across streams
• Events are source of truth
• Read models can be rebuilt from events

## Key Event Sourcing Principles

1. **Events are Facts**: Events describe what happened, not what might happen
2. **Immutable Event Log**: Events are appended, never modified
3. **State is Minimal and Command-Driven**: State is built by replaying events, but ONLY for what a specific command needs to validate. Not all stream fields are needed for all commands.
4. **Not DDD Aggregates**: Stream roots group events logically, but aren't bundles of related data like DDD aggregates. State is determined per-command, not designed upfront for the whole stream.
5. **Commands are Pure**: No side effects, just decision logic against minimal state
6. **Read Models are Separate**: Read models (projections) are separate from command-validation state. Read models can have rich data; command state stays minimal.
7. **Event Causality**: Commands → [minimal state] → Events → [read models]

## Design Patterns

### Compensation Pattern
Handle errors by appending compensation events:
```text
Command: ProcessPayment failed
  → PaymentFailed event
    (triggered by external error)
  → OrderCancelled event (compensation)
    (or retry logic)

Temporal Queries

Answer "what was the state at time T?":

Replay events up to timestamp T
  → Get historical state

Best Practices for Event Model Design

1. Design Minimal State Per Command

Each command handler only loads the state it needs:

• "LoadOrderState loads { id, items, total, shipping, customer, payment, status, ... }"
• "ConfirmOrderState loads { status, orderId }"
• "ShipOrderState loads { status, orderId, paymentConfirmed }"

2. Separate Command State from Query Models

Keep command-validation state and read models strictly separate:

• Command State (minimal): Used by handlers to validate commands
• Query Models (rich): Used by UI/Processor to display/query data
• Never share between them

3. Name State Interfaces by Command

Use the pattern [CommandName]State to make the relationship explicit:

• PublishReviewState for PublishReview command
• EditReviewState for EditReview command
• ReviewState (ambiguous - which command?)

4. Document State Transitions Clearly

Show what state changes trigger what commands:

• Include initial state
• Show all valid transitions
• Mark impossible transitions (and why)
• Document rejection conditions

5. Make All Constraints Explicit

Transform "obvious" business rules into documented invariants:

• "Obviously can't ship an unconfirmed order"
• "ShipOrder validation: requires status='Confirmed' with paymentId"

6. Keep Event Data Factual

Events record facts, not derived values:

• "OrderCreated { items, total }" (total is computed from items)
• "OrderCreated { items[] with unitPrice, shippingAddress }" (total computed in projection)

Quality Checklist

• All events are immutable facts (past tense)
• Events contain only captured data, no computed fields
• State projection is deterministic from events
• Each command validates against current state
• Commands either produce events or reject
• Event causality is clear
• State transitions are documented
• No references between streams in events
• Read models are optional, not required
• All logic is state → events (pure functions)