Tuyaopen/onchip Pwm

TuyaOpen On-Chip PWM

On-chip — no Kconfig, no TDD

• Platform-provided. Do NOT write CONFIG_ENABLE_PWM. No app_default.config change needed.
• No board_register_hardware(). Call tkl_pwm_* directly with TUYA_PWM_NUM_<n>.
• Confirm which PWM channel (and its output pin) with the user; record as onchip:pwm<n> in used-peripherals.json. Don't reuse a confirmed peripheral's pin.
• Pins: each PWM channel has a fixed output pin (spec.channels[].pin) — pick the channel for the pin you want. There is no tkl_io_pinmux_config for PWM.

Platform spec — read, don't hardcode (channel ↔ pin is fixed)

.tuyaopen/ide/platform.json → peripherals.pwm.spec: channels[] maps each PWM channel id to a fixed output pin — so pick the channel whose pin is the one you want; there is no pin mux for PWM. duty range (e.g. 0–10000) and freq range come from spec.duty / spec.freq — read them, don't assume.

Init + start + change duty

#include "tal_api.h"
#include "tkl_pwm.h"

#define PWM_PORT   TUYA_PWM_NUM_0

void app_pwm_init(void)
{
    TUYA_PWM_BASE_CFG_T cfg = {
        .duty      = 5000,              /* 1–10000 → 50.00% */
        .frequency = 1000,             /* Hz */
        .polarity  = TUYA_PWM_POSITIVE,
    };
    tkl_pwm_init(PWM_PORT, &cfg);
    tkl_pwm_start(PWM_PORT);
}

/* Change brightness/duty at runtime (e.g. breathing light) */
void app_pwm_set_duty(uint32_t duty /* 1–10000 */)
{
    TUYA_PWM_BASE_CFG_T cfg = { .duty = duty, .frequency = 1000, .polarity = TUYA_PWM_POSITIVE };
    tkl_pwm_info_set(PWM_PORT, &cfg);
}

API Reference

Troubleshooting

Reference example

SDK: examples/peripherals/pwm/ (init with duty/frequency/polarity, start).