Tuyaopen/peripheral Audio

TuyaOpen TDL Audio

One TDL audio device covers both the microphone (capture) and the speaker (playback). Capture is callback-driven; playback is a blocking write.

Driver Registration (TDD)

Decide by adaptation, not by whether the SDK has the driver:

• Board-adapted audio (in board-context.md) → board_register_hardware() registers the codec; the app only uses the TDL API below — don't register it yourself.
• Externally-attached codec (the user wired their own — NOT in board-context.md) → register it yourself in usr_board (see usr-board/SKILL.md), reusing the SDK's codec driver. board_register_hardware() only wires codecs the board adapted.
  • On ESP32 an external codec uses the esp_codec_dev / esp-idf I2S SDK, NOT reachable from usr_board/ — put the driver in an esp_components/<name>/ component instead. See usr-board/SKILL.md → ESP32: esp-idf-backed custom drivers.

Headers

#include "tdl_audio_manage.h"

Usage Template

#include "tal_api.h"
#include "tkl_output.h"
#include "tkl_memory.h"
#include "tuya_ringbuf.h"
#include "tdl_audio_manage.h"

static TDL_AUDIO_HANDLE_T s_audio_hdl = NULL;
static TDL_AUDIO_INFO_T   s_audio_info = {0};

/* Microphone callback — type is TDL_AUDIO_MIC_CB. Runs in driver context.
 * Keep it short: copy data into a ring buffer / queue and return.
 * Do NOT call tdl_audio_play() here. */
static void app_audio_mic_cb(TDL_AUDIO_FRAME_FORMAT_E type,
                             TDL_AUDIO_STATUS_E status,
                             uint8_t *data, uint32_t len)
{
    /* `type` is TDL_AUDIO_FRAME_FORMAT_PCM for raw capture.
     * `status` carries VAD info (TDL_AUDIO_STATUS_VAD_START / _VAD_END …). */
    (void)type; (void)status;
    /* e.g. tuya_ring_buff_write(s_rb, data, len); */
}

void app_audio_init(void)
{
    if (OPRT_OK != tdl_audio_find(AUDIO_CODEC_NAME, &s_audio_hdl)) {
        PR_ERR("audio '%s' not found", AUDIO_CODEC_NAME);
        return;
    }

    /* Pass NULL for mic_cb if you only need playback. */
    if (OPRT_OK != tdl_audio_open(s_audio_hdl, app_audio_mic_cb)) {
        PR_ERR("audio open failed");
        return;
    }

    /* frame_size = bytes per capture frame; use it to size your buffers. */
    tdl_audio_get_info(s_audio_hdl, &s_audio_info);
    PR_NOTICE("audio: rate=%u ch=%u bits=%u tm=%ums frame=%u",
              s_audio_info.sample_rate, s_audio_info.sample_ch_num,
              s_audio_info.sample_bits, s_audio_info.sample_tm_ms,
              s_audio_info.frame_size);

    tdl_audio_volume_set(s_audio_hdl, 60);   /* 0–100 */
}

/* Play one PCM buffer (blocking until queued). */
void app_audio_play(uint8_t *pcm, uint32_t len)
{
    tdl_audio_play(s_audio_hdl, pcm, len);
}

API Reference

Mic Callback: type & status

/* TDL_AUDIO_FRAME_FORMAT_E (frame `type`) */
TDL_AUDIO_FRAME_FORMAT_PCM   // 0 — raw PCM (most common)
TDL_AUDIO_FRAME_FORMAT_SPEEX // 1
TDL_AUDIO_FRAME_FORMAT_OPUS  // 2
TDL_AUDIO_FRAME_FORMAT_MP3   // 3

/* TDL_AUDIO_STATUS_E (`status`) — voice-activity hints */
TDL_AUDIO_STATUS_VAD_START   // 1 — speech started
TDL_AUDIO_STATUS_VAD_END     // 2 — speech ended
TDL_AUDIO_STATUS_RECEIVING   // 3
TDL_AUDIO_STATUS_RECV_FINISH // 4

Record → Playback (loopback) pattern

The mic callback runs in driver context — never play from inside it. Buffer the PCM in a tuya_ringbuf, then drain it from your own task:

/* sizing: buffer N ms of audio */
uint32_t buf_len = (record_ms / s_audio_info.sample_tm_ms) * s_audio_info.frame_size;
tuya_ring_buff_create(buf_len, OVERFLOW_PSRAM_STOP_TYPE, &s_rb);
/* mic_cb: tuya_ring_buff_write(s_rb, data, len);
 * task:  read frame_size chunks → tdl_audio_play() */

Large buffers belong in PSRAM (tkl_system_psram_malloc / tkl_system_psram_free).

Enable Macro and NAME Macro

CONFIG_ENABLE_AUDIO_CODECS=y      # enables the audio codec subsystem
CONFIG_AUDIO_CODEC_NAME="audio"   # device name passed to tdl_audio_find()
CONFIG_AUDIO_CODECS_NUM=1         # number of codecs

For board-adapted audio the board Kconfig already selects these — do NOT write them. Only set them when adding a custom codec via usr_board.

AUDIO_CODEC_NAME is the name passed to tdl_audio_find().

Reference Example

examples/peripherals/audio_codecs/