Tuyaos/gpio

TuyaOS GPIO (tkl_gpio)

Demo: apps/tuyaos_demo_examples/src/examples/driver_gpio/example_driver_gpio.c

Confirm first

• Output pin / input pin / IRQ pin numbers (TUYA_GPIO_NUM_x) — platform-specific.
• Pull mode and IRQ edge (rise/fall).

Minimal pattern

#include "tuya_cloud_types.h"
#include "tal_log.h"
#include "tkl_gpio.h"

/* TODO: set pins for THIS board */
#define GPIO_OUT_PIN   TUYA_GPIO_NUM_15
#define GPIO_IN_PIN    TUYA_GPIO_NUM_17
#define GPIO_IRQ_PIN   TUYA_GPIO_NUM_9

static void gpio_irq_cb(void *args)
{
    (void)args;
    /* keep short — IRQ context */
}

void app_gpio_init(void)
{
    TUYA_GPIO_BASE_CFG_T out_cfg = {
        .mode = TUYA_GPIO_PUSH_PULL,
        .direct = TUYA_GPIO_OUTPUT,
        .level = TUYA_GPIO_LEVEL_LOW,
    };
    tkl_gpio_init(GPIO_OUT_PIN, &out_cfg);
    tkl_gpio_write(GPIO_OUT_PIN, TUYA_GPIO_LEVEL_HIGH);

    TUYA_GPIO_BASE_CFG_T in_cfg = {
        .mode = TUYA_GPIO_PULLUP,
        .direct = TUYA_GPIO_INPUT,
    };
    tkl_gpio_init(GPIO_IN_PIN, &in_cfg);

    TUYA_GPIO_LEVEL_E lvl;
    tkl_gpio_read(GPIO_IN_PIN, &lvl);

    tkl_gpio_init(GPIO_IRQ_PIN, &in_cfg);
    TUYA_GPIO_IRQ_T irq = {
        .mode = TUYA_GPIO_IRQ_FALL,
        .cb = gpio_irq_cb,
        .arg = NULL,
    };
    tkl_gpio_irq_init(GPIO_IRQ_PIN, &irq);
    tkl_gpio_irq_enable(GPIO_IRQ_PIN);
}

API

Notes

• Pin numbers differ per chip/board — never copy demo pins blindly.
• Also see software I2C under the same demo folder (example_driver_sw_i2c.c).