Comet

Comet — OpenSpec + Superpowers Dual-Star Development Workflow

OpenSpec and Superpowers orbit the same goal like a binary star system.

OpenSpec handles WHAT  — outline, proposal, spec lifecycle, archive
Superpowers handles HOW — technical design, planning, execution, closing

Core principle: brainstorming cannot be skipped. Every change must undergo deep design (except hotfix and tweak presets).

Decision Core

Agents need only read this section for decision-making. Refer to the Reference Appendix as needed.

Output Language Rule

Use the language of the user request that triggered this workflow as the default output language. When resuming an existing change with a clear dominant artifact language, preserve that language unless the user explicitly asks to switch.

Automatic Phase Detection

Step 0: Active Change Discovery and Intent Detection

1. Detect presets first; if hotfix/tweak matches, invoke the corresponding preset skill directly and do not enter the normal open branch
2. When no preset matches, run openspec list --json to get all active changes

Preset detection has highest priority:

• User explicitly describes a bug fix / hotfix + meets hotfix conditions → directly invoke /comet-hotfix
• User explicitly describes copy/config/docs/prompt small adjustment + meets tweak conditions → directly invoke /comet-tweak
• No preset match → follow the table below

Step 1: Read .comet.yaml state metadata

Prefer reading openspec/changes/<name>/.comet.yaml. If not available, fall back to openspec status --change "<name>" --json, tasks.md, and docs/superpowers/ file checks.

Resume rules:

• On every context resume, rerun Step 0 and Step 1; do not trust conversation history for phase detection
• If there is an active change and the worktree has uncommitted changes, handle them through comet/reference/dirty-worktree.md. That protocol defines checks, attribution, and prohibitions; this file does not repeat them
• If phase: build, first check build_pause, plan, build_mode, and isolation (see details below):
  • If build_pause: plan-ready but isolation and build_mode are already set, treat as stale pause: first output [COMET] Detected stale pause (build_pause=plan-ready but isolation/build_mode already set), auto-clearing and continuing, then run "$COMET_BASH" "$COMET_STATE" set <name> build_pause null, then read the next unchecked task from tasks.md and resume execution per build_mode
  • If build_pause: plan-ready and the plan file exists, but isolation or build_mode is not yet set, return to the /comet-build plan-ready resume point, prompt the user to choose isolation and execution method, and do not regenerate the plan
  • If build_pause: plan-ready but the plan file is missing, return to /comet-build to handle corrupted state or regenerate the plan
  • If build_mode, isolation, or tdd_mode is unset, return to the corresponding /comet-build step to supplement before executing
  • If all are set, read the next unchecked task from tasks.md and continue:
    • If build_mode: subagent-driven-development, do not execute tasks directly in the main window; return to /comet-build's background subagent dispatch rules, main window only coordinates
    • Other execution modes follow /comet-build's corresponding rules
• If phase: verify and verify_result: fail, enter the verification failure decision blocking point: pause and ask the user to fix or accept deviation; only after the user chooses fix, run "$COMET_BASH" "$COMET_STATE" transition <name> verify-fail and invoke /comet-build
• If phase: open but proposal/design/tasks are complete, first run "$COMET_BASH" "$COMET_GUARD" <change-name> open --apply to repair state, then continue detection
• If phase: archive, only invoke /comet-archive; /comet-archive must first wait for final archive confirmation. After archive succeeds, the change moves to the archive directory, so do not run guard against the old active directory

Step 2: Phase Determination (check in order, first match wins)

1. archived: true or change moved to archive → Workflow complete
2. verify_result: pass and archived is not true → Invoke /comet-archive (first perform final archive confirmation)
3. verify_result: fail → Enter verification failure decision blocking point (pause and ask fix or accept deviation; only after user chooses fix, run verify-fail then /comet-build)
4. phase: verify or tasks.md all checked → Invoke /comet-verify
5. phase: build or has Design Doc but plan/execution incomplete → Route by workflow: hotfix → /comet-hotfix, tweak → /comet-tweak, full → /comet-build
6. phase: design or has change but no Design Doc → Invoke /comet-design
7. phase: open or active change exists but .comet.yaml is missing → Invoke /comet-open
8. No active change → Invoke /comet-open

If metadata conflicts with file state, use verifiable file state as source of truth and correct .comet.yaml before continuing.

Preset Upgrade Criteria

hotfix → full (upgrade if any condition met):

• Change involves 3+ files
• Architecture changes (new modules, new interfaces, new dependencies)
• Database schema changes
• Fix introduces new public API
• Fix scope exceeds a single function/module

tweak → full (upgrade if any condition met):

• Change involves 5+ files
• Cross-module coordination required
• 5+ new test cases needed
• Config item additions or deletions (not value changes)
• New capability needed
• Delta spec needed (existing spec affected)

Error Handling Quick Reference

Phase Transitions

Flow chain: open → design → build → verify → archive

Continuous execution requirement: starting from the detected phase, the agent automatically continues through all later phases. But auto-advancing only applies at transition points without user decisions. When encountering user decision points, must use the current platform's available user input/confirmation mechanism to pause and wait for the user's explicit response. Must not use recommendation rules, defaults, or historical preferences to substitute for user confirmation, and must not just output a text prompt and then continue executing.

Distinguish phase advancement vs automatic handoff: each sub-skill runs phase guard --apply before exit to advance the .comet.yaml phase field. This step always happens and is not controlled by auto_transition. After that, the sub-skill runs "$COMET_BASH" "$COMET_STATE" next <name> to resolve the next action: when auto_transition is not false, output is NEXT: auto (auto-invoke next skill); when auto_transition is false, output is NEXT: manual (do not invoke next skill, show a manual run hint). Therefore auto_transition only controls next skill invocation, not phase advancement. Regardless of auto_transition, user decision points below remain blocking.

Decision points are blocking points: whenever reaching any of the following nodes, the current /comet invocation must stop, and follow the comet/reference/decision-point.md protocol to obtain the user's explicit choice. Only after the user explicitly chooses can the corresponding state fields be written and operations executed, then auto-advance resumes.

Nodes requiring user participation (pause only at these nodes):

1. Open phase proposal/design/tasks review and confirmation
2. Confirm design approach during brainstorming
3. Plan-ready pause choice during build phase, followed by workflow configuration selection (isolation + execution method + TDD mode)
4. Decide to fix or accept deviation when verify fails (including Spec drift handling)
5. Choose branch handling method for finishing-branch
6. Archive phase final confirmation before running the archive script
7. Encounter upgrade conditions (hotfix/tweak → full workflow)
8. Build phase scope expansion requiring redesign or new change split
9. Open phase large PRD requiring confirmation to split into multiple changes

Agents should not skip these decision points; other unambiguous phase transitions must proceed automatically, must not exit midway. At decision points, must not skip user confirmation or choose automatically — must explicitly obtain the user's choice through the current platform's available user input/confirmation mechanism before continuing.

Red Flags — when these thoughts appear, STOP and check:

Subcommand Quick Reference

/comet
  ↓ Auto-detect
/comet-open ──→ /comet-design ──→ /comet-build ──→ /comet-verify ──→ /comet-archive
  (OpenSpec)      (Superpowers)     (Superpowers)     (Both)          (OpenSpec)

/comet-hotfix (preset, skip brainstorming)
  open ──→ build ──→ verify ──→ archive
    ↑ If upgrade triggered → block for confirmation → supplement Design Doc → return to full workflow

/comet-tweak (preset, skip brainstorming and full plan)
  open ──→ lightweight build ──→ light verify ──→ archive
    ↑ If upgrade triggered → block for confirmation → supplement Design Doc → return to full workflow

Reference Appendix

State Machine Hard Constraints

• Before build → verify, isolation must be branch or worktree
• Before build → verify, build_mode must be selected
• build_mode: subagent-driven-development must also have subagent_dispatch: confirmed
• Before full workflow leaves build phase, tdd_mode must be selected as tdd or direct
• build_mode: direct is allowed by default only for hotfix / tweak; full workflow requires direct_override: true
• build_pause is not an execution method and must not be written to build_mode
• These constraints are enforced by both comet-guard.sh build --apply and comet-state.sh transition <name> build-complete

.comet.yaml Field Reference

See comet/reference/comet-yaml-fields.md for complete field reference with examples and descriptions.

File Structure

See comet/reference/file-structure.md for the complete directory layout and artifact organization.

Auto-Transition Protocol

See comet/reference/auto-transition.md for the complete automatic handoff workflow.

Context Recovery

See comet/reference/context-recovery.md for structured recovery after context compression.

Decision Point Protocol

See comet/reference/decision-point.md for the complete user decision point protocol.

Debug Gate Protocol

See comet/reference/debug-gate.md for the complete debug gate protocol.

Script Location

Comet scripts are distributed in comet/scripts/. Do not hardcode paths — locate once, cache in env vars. This block is a standard boilerplate repeated in every sub-skill for independent loadability; changes must be kept in sync across all files (boilerplate version: v2, update this version when changing to help locate files needing sync):

COMET_ENV="${COMET_ENV:-$(find . "$HOME"/.*/skills "$HOME/.config" "$HOME/.gemini" -path '*/comet/scripts/comet-env.sh' -type f -print -quit 2>/dev/null)}"
if [ -z "$COMET_ENV" ]; then
  echo "ERROR: comet-env.sh not found. Ensure the comet skill is installed." >&2
  return 1
fi
. "$COMET_ENV"

# Stop workflow when script location fails
if [ -z "$COMET_GUARD" ] || [ -z "$COMET_STATE" ] || [ -z "$COMET_HANDOFF" ] || [ -z "$COMET_ARCHIVE" ]; then
  echo "ERROR: Comet scripts not found. Ensure the comet skill is installed." >&2
  echo "Expected path pattern: */comet/scripts/comet-*.sh under project or platform skill directories" >&2
  return 1
fi

Auto state update: Guard supports --apply flag, automatically updating .comet.yaml state fields after checks pass:

"$COMET_BASH" "$COMET_GUARD" <change-name> <phase> --apply

--apply delegates to comet-state transition. Use these semantic events when state changes need to be expressed directly:

"$COMET_BASH" "$COMET_STATE" transition <change-name> open-complete
"$COMET_BASH" "$COMET_STATE" transition <change-name> design-complete
"$COMET_BASH" "$COMET_STATE" transition <change-name> build-complete
"$COMET_BASH" "$COMET_STATE" transition <change-name> verify-pass
"$COMET_BASH" "$COMET_STATE" transition <change-name> verify-fail
"$COMET_BASH" "$COMET_STATE" transition <archive-name> archived

Resolve next action: after guard-based phase advancement, use the next subcommand to determine whether to auto-invoke the next skill:

"$COMET_BASH" "$COMET_STATE" next <change-name>

Output format: NEXT: auto|manual|done + SKILL: <skill-name> (omitted for done) + HINT (for manual only). With auto_transition: false, output is manual, which pauses only the next skill invocation and does not block phase updates.

Archive script: Complete all archive steps in one command:

"$COMET_BASH" "$COMET_ARCHIVE" <change-name>

After loading comet, agents should run the variable assignments above once, then reuse $COMET_GUARD, $COMET_STATE, $COMET_HANDOFF, $COMET_ARCHIVE throughout the session.

Best Practices

1. brainstorming cannot be skipped — Every change must undergo deep design (except hotfix and tweak)
2. delta spec is a living document — Freely modify during phase 3, sync at archive
3. Handoff packages are generated by scripts — OpenSpec → Superpowers context must be generated through comet-handoff.sh as compact traceable excerpts (use --full when needed), and validated by guard for source/hash/mode
4. Keep tasks.md in sync — Check off each completed task
5. Commit frequently — One commit per task, message reflects design intent
6. Verify before archive confirmation — Enter /comet-archive only after /comet-verify passes, but wait for final user confirmation before running the archive script
7. Classify incremental updates — Small edits, medium brainstorming, large new changes
8. Plan must associate with change — File header contains change: and design-doc: metadata
9. Archive closure — design doc and plan must mark archived-with status
10. Modifying existing features — Just open a new change
11. Preset has limits — Switch to full workflow promptly when hotfix/tweak meet upgrade conditions