Lsp Verify

Requires the agent-lsp MCP server.

lsp-verify: Three-Layer Verification

When to Use

Run this skill after any significant change to verify correctness at every level:

• After editing source files (logic changes, refactors, new functions)
• After merging or rebasing branches
• After dependency updates or configuration changes
• Before committing or pushing code

Input

• workspace_dir (required): absolute path to the workspace root (e.g. /Users/you/code/myproject)
• changed_files (optional): list of files you edited — used for targeted diagnostics

Execution

Pre-step: Test correlation (when changed_files is provided)

Before running the three layers, call get_tests_for_file for each changed source file to build a source → test file map:

mcp__lsp__get_tests_for_file({ "file_path": "<changed/source/file>" })

Returns the test files that correspond to each source file. Store this map — it is used in Layer 3 to focus failure analysis. If changed_files is unknown, skip this step.

Run all three layers in parallel — they are independent and do not need to be sequenced. Issue all three calls in the same message to minimize wall time.

Layer 1: LSP Diagnostics

Call mcp__lsp__get_diagnostics with file_path set to each changed file. get_diagnostics takes a file path, not a workspace directory.

Note: requires LSP to be initialized. If not yet running, call start_lsp with the workspace root first.

mcp__lsp__get_diagnostics({ "file_path": "<path/to/changed/file>" })

Call once per changed file. If you don't know which files changed, call it on the primary files touched in this session. Rank results by severity: errors first, then warnings.

Layer 2: Build

mcp__lsp__run_build({ "workspace_dir": "<workspace_dir>" })

Returns { "success": bool, "errors": [...] }. A failed build means the code does not compile. Build errors are blocking — must be resolved before shipping.

Layer 3: Tests

mcp__lsp__run_tests({ "workspace_dir": "<workspace_dir>" })

Does NOT require start_lsp. Returns { "passed": bool, "failures": [...] }.

Large output warning: run_tests on large repos can return hundreds of thousands of characters and exceed the context window. If the result is saved to a file rather than returned inline, do NOT attempt to read the whole file. Instead, search it for failures:

grep -E "^(FAIL|--- FAIL)" <output_file>

Or scope tests to the correlated test files from the pre-step to avoid the size issue entirely:

GOWORK=off go test -count=1 -short ./internal/mypackage/... 2>&1 | grep -E "FAIL|ok"

Using test correlation: If the pre-step produced a source → test file map, cross-reference failing test names against that map. For each failure, note whether it is in a correlated test file (directly covers the changed code) or an unrelated test file (collateral failure from a shared dependency). This distinction guides where to investigate first.

Test failures are blocking — they indicate regressions or unmet contracts.

Output Format

After running all three layers, produce a structured report:

## Verification Report

### Layer 1: LSP Diagnostics
[CLEAN / N errors, M warnings]

<details if N > 0 or M > 0>
Errors:
- file:line - message

Warnings:
- file:line - message
</details>

### Layer 2: Build
[PASSED / FAILED - N errors]

<details if FAILED>
- error message (file:line)
</details>

### Layer 3: Tests
[PASSED / FAILED - N failures]

<details if FAILED>
- test name: message (file:line) [correlated / unrelated]
</details>

<if test correlation map exists>
Test files covering changed source:
  changed/source/file.go → test/source_file_test.go
</if>

### Summary
Overall: CLEAN / NEEDS ATTENTION
Blocking issues: [errors that must be fixed before shipping]

• CLEAN: no errors in any layer (warnings are advisory only)
• NEEDS ATTENTION: one or more blocking issues found

Blocking vs Advisory

Build errors and test failures block shipping. LSP warnings and style suggestions are advisory — document them but do not treat as blockers unless they indicate logical errors.

When Verification Passes: Optional Format

If all three layers are CLEAN and changed_files is known, offer to format the changed files before committing:

mcp__lsp__format_document({ "file_path": "<changed-file>" })

Apply the returned TextEdit[] via apply_edit if non-empty. Run once per changed file. Skip if the user did not request formatting.

When Errors Are Found: Applying Code Actions

If Layer 1 returns errors, the LSP may offer quick fixes. For each error location, call suggest_fixes to surface available fixes:

mcp__lsp__suggest_fixes({
  "file_path": "<file>",
  "line": <error line>,
  "column": <error column>
})

Returns a list of available actions (e.g. "Add missing import", "Implement interface methods", "Remove unused variable"). Pick the most appropriate one and apply it:

mcp__lsp__apply_edit({
  "file_path": "<file>",
  "old_text": "<text to replace>",
  "new_text": "<replacement>"
})

Or if the code action returns a workspace_edit, pass it directly to apply_edit via the workspace_edit parameter.

After applying, re-run Layer 1 on the affected file to confirm the error is resolved before moving on. Do not apply multiple code actions in bulk without verifying each one — they may interact.

When to use: Compile errors from missing imports, unimplemented interface methods, or type mismatches often have one-click fixes available. Manual reasoning is still required for logic errors.