Vc Intent Clarify

vc-intent-clarify

Output style: lead each question with the recommended option; plain language, no filler — process/development-protocols/communication-standards.md.

Two-mode intent clarification: SIMPLE (direct, 3-5 reads) and DEEP (research subagent first, then questions).

Scores a user request's ambiguity and — when Tier 2 triggers — produces a structured, multi-dimension clarification suite with option-rich questions rather than open-ended prompts. Uses vc-scenario, vc-predict, and vc-sequential-thinking style reasoning to generate questions, not just to answer them.

This is the highest-leverage skill in the system. Poor intent clarification wastes entire phase programs. Invest in the question generation step.

When To Invoke

At ORCHESTRATOR before every routing decision for new user requests. Check auto-skip conditions first. If none apply, score the four signals and act on the resulting tier.

Auto-Skip Conditions

These conditions force Tier 0 regardless of the ambiguity score. Check these FIRST.

1. Continuation phrases — "go", "continue", "proceed", "just do it", or similar standalone instruction
2. Mid-phase-program execution — active phase plan is selected and approved, user is advancing
3. Trivial fix — single-file, under 15 lines, no schema/API/auth changes
4. Explicit mode command — "ENTER EXECUTE MODE", "ENTER RESEARCH MODE", etc.
5. Resuming active plan — an existing active plan is identified and confirmed
6. Pure information question — "What is X?", "How does Y work?" mapping to a single obvious routing target

When an auto-skip condition matches, produce only a 1-sentence restatement of intent and route immediately per the existing routing protocol. Do not announce the tier. Do not surface any questions.

Priority ordering when multiple conditions match simultaneously:

1. Explicit mode command (highest priority)
2. /goal mid-program execution
3. Continuation phrase
4. Trivial fix / active-plan resume (lowest priority)
5. Pure information question / resuming active plan (lowest priority — treated as Tier 0, auto-route to vc-research-agent or answer directly)

Apply only the highest-priority matching condition's abbreviated behavior. Do not combine behaviors from multiple matching conditions.

Under /goal autonomous execution: Even when an auto-skip condition matches and Tier 0 applies, the 1-sentence restatement MUST be emitted to the chat log as an audit entry. Never skip the restatement emit under /goal — it proves Tier-0 ran and serves as the audit log for that phase's intent confirmation.

4-Signal Scoring Formula

Each signal is worth +1. Sum to get the ambiguity score.

Score thresholds:

Mode Selection

Before running any tier, the orchestrator selects the operating mode. Mode affects only HOW option values are populated in questions — the question FORMAT, CRITICAL/USEFUL grouping, and wait-for-go-ahead footer are identical in both modes.

SIMPLE MODE (default)

• Orchestrator runs the skill directly in the main thread
• 3–5 file reads max (the Light Research Pass below)
• Works when concrete option values can be derived from active plans + context routing alone
• No subagent spawning

Trigger conditions (all must be true for SIMPLE):

• Ambiguity score ≤ 3
• Request is scoped to a known file, package, or named feature
• Orchestrator can fill option values from active plans + context routing alone
• Continuation, resume, or single-package scenario

DEEP MODE

• Spawns a full research subagent BEFORE generating questions
• The subagent returns structured findings; the orchestrator uses those findings to populate question options with real file paths, concrete values, and risk-aware implications
• No generic {X} placeholders ever — this mode's entire purpose is to eliminate them
• Questions are materially better because they are grounded in actual codebase discovery

Trigger conditions (any ONE triggers DEEP):

• Ambiguity score is 4/4 (all four signals)
• Request involves a phase program kickoff (new umbrella + N phases)
• Request touches 3+ packages or feature folders
• Request involves an architectural decision (new pattern, library swap, schema design)
• User explicitly requests deep analysis ("deep dive", "investigate before asking", "thorough")
• Orchestrator judges that good option values CANNOT be generated without a codebase scan

Deep Mode — Research Subagent Protocol

When DEEP MODE is triggered, the orchestrator spawns a research subagent before generating questions. The subagent's only job is to return raw findings — it does NOT generate questions.

Research Subagent Prompt Template

Pass this prompt to the subagent verbatim, substituting the bracketed values:

INTENT CLARIFY — DEEP MODE RESEARCH
Request: [user's exact request]
Relevant feature: [if known, else "unknown"]
Active plans found: [list from plan-discovery]

Your job: investigate the request deeply so the orchestrator can generate high-quality clarifying questions.

Required steps (all must run):
1. vc-review-situation — current branch, worktrees, active plans, uncommitted changes
2. vc-scout — scan codebase for files/modules relevant to: [keywords from request]
3. vc-sequential-thinking — map the decision dimensions: what must be decided first? what is downstream?
4. vc-scenario — for each plausible interpretation: what are the top 3 failure modes?
5. vc-predict — 5-persona debate: senior dev / PM / security reviewer / QA / end user — what does each want to know before starting?

Return structured output with these sections:
- DISCOVERED CONTEXT: actual file paths, module names, package names found
- DECISION DIMENSIONS: ordered list of decisions that have downstream impact
- RISK SURFACE: for each interpretation, top 2 failure modes
- PERSONA DISAGREEMENTS: what different stakeholders would want prioritized differently
- CONCRETE VALUES: real paths, command strings, feature names to use in question options

Do NOT generate questions — that is the orchestrator's job. Just return raw findings.

After Receiving Subagent Output

The orchestrator uses the subagent's DISCOVERED CONTEXT and CONCRETE VALUES sections to replace every option value in the Tier 2 question suite. The question generation steps (Steps 1–6 in Tier 2 below) proceed as normal, but option text is populated from real findings instead of the light research pass.

Tier 0: Silent Auto-Route

No user interaction added. Score 0–1 or auto-skip triggered.

Route to the detected agent per the existing routing protocol. Do not show a routing summary.

Tier 1: Routing Summary

Perform a light research pass (see section below). Then present:

Routing: [detected intent] → [target agent]
Scope: [what I think you want changed]
Plan: [existing plan if found, or "new work"]

WAIT for the user's next message before routing. Do NOT route in the same response. Do NOT say "I'll proceed unless you correct me."

If the user confirms, proceed. If the user corrects, re-score and re-route.

Tier 2: Full Structured Clarification Suite

Tier 2 is the core of this skill. When triggered, the orchestrator does the following:

Step 1 — Research pass (mode-dependent)

In SIMPLE MODE: Perform a light research pass (see Light Research Pass section). Budget: 3–5 file reads. Scan active plans, context routing table, recent git state, and the named file/package if any. This populates concrete values in question options.

In DEEP MODE: The research subagent has already run (see Deep Mode section above) and returned structured findings. Use the DISCOVERED CONTEXT and CONCRETE VALUES sections from those findings instead of performing a light research pass. Skip the 3–5 file read budget — the subagent already covered it.

In both modes, the goal of Step 1 is identical: replace every generic placeholder in question options with concrete values (package paths, plan IDs, file names, feature names).

Step 2 — Question generation using vc-scenario + vc-predict style reasoning

Before writing the questions, THINK across these axes:

• What are the plausible failure modes if we pick the wrong scope? (vc-scenario thinking)
• What would 5 different people (senior dev, PM, security reviewer, QA, end user) want to know before starting? (vc-predict thinking)
• What ordering of decisions has the most downstream impact? (vc-sequential-thinking)

Use this analysis to GENERATE questions — not to answer them. The goal is to surface the decisions that, if made wrong, will cause the most rework.

Step 3 — Classify each dimension as CRITICAL or USEFUL

• CRITICAL — getting this wrong derails the entire phase or causes rework
• USEFUL — helpful context but can default to recommendation without blocking

CRITICAL dimensions appear first. The user can say "skip useful questions" to answer only CRITICAL ones.

Step 4 — Format each question using AskUserQuestion tool

REQUIRED: use the AskUserQuestion tool to render all Tier 2 questions. Do NOT render questions as markdown text. The AskUserQuestion tool renders clickable option selections in the Claude Code UI, which is far faster for the user than typing answers.

How to call it:

• Pass all questions in a single AskUserQuestion call (up to 4 per call)
• Group CRITICAL questions into the first call(s), USEFUL questions after
• Use multiSelect: false for mutually exclusive choices (default)
• Use multiSelect: true only when the user genuinely needs to pick multiple options (e.g. "which packages are in scope")
• The header field (max 12 chars) is the chip label — use the dimension name abbreviated
• Set description to the 1–2 sentence consequence explanation
• Each option label is the short choice text; description is the implication

Option rules (same as before, now applied to AskUserQuestion fields):

• Minimum 3 options per question (the tool supports up to 4; always include an "Other" option as the last one)
• Mark exactly one option as (Recommended) by appending it to the label: "Sequential — single agent (Recommended)"
• Fill option labels with concrete values from the research pass (real file paths, package names, plan IDs) — never generic placeholders
• The "Other" option label: "Other" with description: "Describe your preference in the next message"

If AskUserQuestion is unavailable (tool not in scope, non-interactive context): fall back to the markdown format below, but always prefer the tool when available.

**Q[N]: [Question title]**
[1–2 sentences explaining why this decision matters and what goes wrong if we choose incorrectly.]

Options:
  A) [option] — [implication] *(Recommended)*
  B) [option] — [implication]
  C) [option] — [implication]
  D) Other: describe your preference

Step 5 — Group questions by dimension with headers

Each dimension header format:

### [Dimension name] 🔴 CRITICAL

or

### [Dimension name] 🟡 USEFUL

Step 6 — Emit wait-for-go-ahead footer

After all questions, always emit:

Answer what you want — partial answers are fine. I'll use the (Recommended) defaults for anything you skip. Ready to proceed when you confirm.

Do NOT route to any subagent before receiving at least a partial response or explicit "go".

The 8 Standard Dimensions

For a substantial request, cover all 8 dimensions. For a narrower request, use only the dimensions that are genuinely ambiguous. Do not pad — every question should require a real decision.

Dimension 1 — Scope and Boundaries 🔴 CRITICAL

Clarify what changes and — equally important — what must NOT change.

Example questions:

• Which packages/files are in scope?
• Are there components or APIs that must remain untouched?
• Is this isolated to one package or cross-cutting?

Dimension 2 — Success Criteria 🔴 CRITICAL

Clarify what the user truly wants to see as a result.

Example questions:

• What does "done" look like to you?
• Is the goal a passing test suite, a deployed change, a passing code review, or visible UI behavior?
• Is there a specific user action or flow that must work?

Dimension 3 — Failure Modes and Risk Surface 🔴 CRITICAL

Clarify what the user is most worried about going wrong.

Example questions:

• What are the most likely ways this change breaks something?
• Are there auth, billing, schema, or public API surfaces this touches?
• Is there a rollback requirement?

Dimension 4 — Prior Context 🟡 USEFUL

Clarify what has already been tried or is already in progress.

Example questions:

• Is there an existing plan file for this?
• Has this been attempted before? What happened?
• Is this a continuation of recent work (visible in git status or active plans)?

Dimension 5 — Priority and Urgency 🟡 USEFUL

Clarify the expected speed/quality tradeoff.

Example questions:

• Is this a hotfix that needs to ship now, or a proper implementation with full plan/test coverage?
• Does this block other work in flight?
• Quick patch acceptable, or must it be production-grade immediately?

Dimension 6 — Autonomy Boundaries 🟡 USEFUL

Autopilot Mode — CRITICAL promotion: When an autopilot trigger phrase is detected, Dimension 6 is treated as 🔴 CRITICAL rather than 🟡 USEFUL. It must appear in the first AskUserQuestion call alongside the CRITICAL dimensions, not after them. The question must explicitly name the three hard stops and ask the user to confirm they understand those remain manual-first gates.

Clarify how much the agent can decide on its own vs. checkpoint with the user.

Example questions:

• Can the agent pick the implementation approach, or does the user want to choose?
• Should the agent pause for approval before destructive changes (schema migrations, API removals)?
• Is a /goal-style autonomous run acceptable, or does each phase need a checkpoint?

Autopilot-specific example (when trigger detected):

• "This run will proceed autonomously. The following gates remain manual regardless: (1) irreversible/outward-facing actions not in the validate-contract, (2) live-provider billed feasibility probes (cost-class: needs-live-provider), (3) cascade BLOCKED (two consecutive phases BLOCKED). All other gates auto-proceed. Are there any additional gates you want to keep manual for this run?"

Dimension 7 — Technical Constraints 🟡 USEFUL

Clarify any specific libraries, patterns, or constraints the solution must conform to.

Example questions:

• Is there a specific library or pattern required?
• Are there style/lint rules that constrain the approach?
• Must the solution work in a specific runtime environment (Bun vs Node, edge vs server)?

Dimension 8 — Phase Program Questions 🔴 CRITICAL (multi-phase only)

Only include when the request implies multiple dependent phases or a long-running program.

Example questions:

• Should phases run sequentially or can some parallelize?
• Which phase is the hard dependency for the rest?
• What is the acceptable stopping point if a later phase is blocked?

Full Tier 2 Example

Below is a complete example of good Tier 2 output for a request like "refactor the billing flow to add credit top-up support."

Intent understood: Add credit top-up support to the billing flow. Before routing, I need to resolve a few key decisions.

Scope and Boundaries 🔴 CRITICAL

Q1: Which layers does this change touch? Getting scope wrong here means re-opening files mid-phase and invalidating earlier test gates.

Options: A) Prisma schema + tRPC billing router + UI billing page — full stack (Recommended) B) tRPC billing router + UI only — skip schema migration for now C) UI only — wire to existing endpoints, validate assumptions first D) Other: describe your preference

Q2: Which existing billing surfaces must NOT change? We need to know what is off-limits before touching shared code paths.

Options: A) Stripe webhook handlers and subscription models are frozen (Recommended) B) Only the credit transaction model is frozen C) Nothing is frozen — all billing code is in scope D) Other: describe your preference

Success Criteria 🔴 CRITICAL

Q3: What does "done" look like? If the success bar is wrong, the agent will stop too early or overshoot.

Options: A) User can trigger a top-up from the UI and credit balance updates — end-to-end (Recommended) B) Backend complete with tests passing; UI is out of scope for this phase C) Plan written and approved — no implementation yet D) Other: describe your preference

Failure Modes and Risk Surface 🔴 CRITICAL

Q4: Is there a risk surface we must protect? Billing changes can silently double-charge or under-credit users if guard logic is missing.

Options: A) Add explicit idempotency key to the top-up Stripe call (Recommended) B) No idempotency needed — amount is small enough that duplicates are acceptable C) Not sure — flag for code review D) Other: describe your preference

Priority and Urgency 🟡 USEFUL

Q5: Speed vs. quality tradeoff? Affects whether we write a full plan with validate-contract or skip to a lightweight execute.

Options: A) Proper plan + validate-contract + full test coverage (Recommended) B) Quick implementation with tests deferred to a follow-up C) Research and plan only — no implementation this session D) Other: describe your preference

Answer what you want — partial answers are fine. I'll use the (Recommended) defaults for anything you skip. Ready to proceed when you confirm.

Bad vs. Good Question Format

Understanding the failure modes in question generation:

Bad (open-ended, no options)

Q: What scope should the refactor cover?

This forces the user to type a free-form answer. Slow. Vague. Hard to act on.

Bad (only 2 options, no recommendation marked)

Q: Full stack or UI only?
  A) Full stack
  B) UI only

Binary questions miss the third path. No recommendation means the user has no default to accept.

Bad (generic placeholders left in)

Q: Which areas? [A] just {X} [B] {X} and {Y}

Placeholders not replaced with concrete values from light research. Signals the skill was invoked lazily.

Good

**Q1: Which packages does this refactor touch?**
Scope determines which test gates apply and which blast-radius files need review before touching code.

Options:
  A) packages/api/src/router/billing.ts + apps/web/src/app/billing — full stack *(Recommended)*
  B) apps/web/src/app/billing only — frontend changes, read-only backend exploration
  C) packages/api/src/router/billing.ts only — backend logic, no UI changes yet
  D) Other: describe your preferred scope

Autonomy Mode

What Grants Autonomy

• Explicit autonomy phrases: "you decide", "just do it", "full autonomy", "don't ask", "autonomous"
• Mid-phase-program context where the current phase plan is selected and approved
• User has answered Tier 2 questions and said "go"
• Autopilot Mode trigger phrase detected (see orchestration.md §Autopilot Trigger Routing): autonomy is granted for the full run scope. Dimension 6 (Autonomy Boundaries) is treated as CRITICAL rather than USEFUL for this session.

Phrase Matching Rule

Autonomy phrases must be standalone statements or sentence-initial. They do NOT match when embedded in descriptive text.

• "just do it" (standalone) → autonomy granted
• "just do the simple version" → NOT autonomy (descriptive use, user is specifying scope)
• "you decide how to implement it" → autonomy granted

What Autonomy Means

• All tiers collapse to Tier 0 for the current task chain
• Clarification questions are skipped
• Routing summaries are skipped

What Autonomy Does NOT Override

• EXECUTE approval gate ("ENTER EXECUTE MODE" still required)
• Plan review checkpoint
• Phase-program phase boundaries
• High-risk execution handoff gates
• The Consolidated Autopilot Clarification Round (see §Autopilot Clarification Mode below) — autopilot grants autonomy for the run, but the clarification round itself still fires once to lock the session. It is a different gate from the standard intent-clarify suite.

Autopilot Clarification Mode

When an autopilot trigger is detected (see orchestration.md §Autopilot Trigger Routing), the standard Tier 0/1/2 scoring flow is bypassed. A single Consolidated Autopilot Clarification Round replaces it.

When This Mode Fires: The orchestrator sets autopilot clarification mode when a recognized autopilot trigger phrase is detected at any RIPER-5 phase boundary. The trigger detection and phrase list live in orchestration.md §Autopilot Trigger Routing — this skill does not own the detection logic.

Consolidated-Round Rule: Issue exactly ONE AskUserQuestion call covering all four mandatory dimensions in a single round-trip: (1) Scope and task name (CRITICAL), (2) Definition of done (CRITICAL), (3) Risk tolerance / Hard-stop confirm (CRITICAL = Dimension 6 promoted), (4) Gate deviations (CRITICAL). After the user responds, the session is locked and the orchestrator proceeds to emit the provisional goal block.

Abort-to-Interactive Rule: If the user responds to the consolidated round with a phrase opting out of autopilot ("actually, let's do this step by step", "cancel autopilot", "stop", "interactive please"): (1) Acknowledge the opt-out, (2) Revert to standard RIPER-5 interactive behavior, (3) Re-issue the standard Combined Clarification Gate (Step 6.5), (4) Do NOT emit the provisional goal block, (5) Deactivate autopilot-mode for this session.

Validator Conformance: Autopilot clarification output MUST include all four validator markers: restatement, score (always 4/4 under autopilot), mode (always deep for phase-program kickoffs), reason/because justification. Full spec: process/development-protocols/autopilot.md §Consolidated Clarification Round.

Light Research Pass

Used in SIMPLE MODE only. In DEEP MODE, the research subagent replaces this step entirely.

Performed by the orchestrator in the main thread, not as a subagent delegation.

Budget: 3–5 file reads max.

What it checks:

1. Active plan inventory (process/general-plans/active/ and process/features/*/active/)
2. Context routing table in process/context/all-context.md (match keywords to domain)
3. Recent git status (uncommitted changes related to the request?)
4. If a specific package or file is named, one quick read of that file

Purpose: replace generic placeholders in question options with concrete names (package paths, plan IDs, model names, router file names). A question with concrete values is 3× more actionable than one with {X}.

This is NOT a full research-agent delegation. Route to research-agent after clarification resolves.

Intent Revalidation After Research

After the research-agent completes, the orchestrator checks whether the original intent still holds.

If research reveals the request is fundamentally different from what was assumed, re-present a Tier 1 routing summary with updated understanding.

If research confirms the original intent, proceed to INNOVATE or PLAN without re-asking. Never repeat clarification that was already resolved.

FAST Mode Integration

Intent clarification fires BEFORE the fast-mode agent is spawned. The orchestrator scores and clarifies in the main thread, then hands the clarified intent to the fast-mode-agent prompt.

Inside the fast-mode-agent, no additional clarification is needed — intent is already resolved.

Fallback (Still Ambiguous After Tier 2)

If the user answers Tier 2 questions but a single routing path still cannot be determined:

1. State what remains unclear in one sentence.
2. Ask one final direct question (plain, not multiple-choice).
3. If still unresolvable after that, default to the research-agent with the narrowest reasonable scope.

Never loop clarification more than twice. Two rounds max, then route to research.

Worked Scoring Examples

Example A — "Fix the login bug on the auth page"

• Ambiguous scope: No (+0) — "auth page" is a specific scope
• No explicit path: Yes (+1) — no file named, but scope is narrow
• Multiple intents: No (+0) — single intent (fix)
• First interaction: No (+0)

Score: 1 → Tier 0, auto-route to debugger/execute.

Example B — "Make the app faster"

• Ambiguous scope: Yes (+1) — bundle size, API perf, rendering, caching all possible
• No explicit path: Yes (+1) — no file or package named
• Multiple intents: Yes (+1) — refactor, config change, infra work, or research
• First interaction: Yes (+1)

Score: 4 → Tier 2, full structured clarification suite. Generate questions across Scope, Success Criteria, Failure Modes, Priority, Technical Constraints (all dimensions where "faster" is ambiguous).

Example C — "Add a top-up button to the billing page"

• Ambiguous scope: No (+0) — billing page is named
• No explicit path: Yes (+1) — no file path
• Multiple intents: Yes (+1) — could stop at UI only or require schema/Stripe changes
• First interaction: Yes (+1)

Score: 3 → Tier 2, but only 3–4 questions covering Scope, Success Criteria, Risk Surface (billing-specific failure modes). Skip Autonomy Boundaries and Phase Program since it's a single-phase feature.