Debug Loop

Debug Loop — Iterative Root Cause Debugging

A 7-phase debugging loop: investigate via causal tree analysis, hypothesize root cause, implement targeted fix, verify with evidence, score against criteria, pressure-test via critique agent, and report with transparency markers. Iterates up to 5x on failures.

Scope Check

Before entering the loop, assess whether it's warranted. The trigger is the verdict category, not a numeric score — research shows LLM-assigned confidence scores are poorly calibrated for open-ended tasks (Tian et al., EMNLP 2023; 49-84% calibration error on open-ended generation).

• Skip the loop if debugging-memory returned KNOWN_FIX — apply the fix directly and verify
• Skip the loop for trivial issues: typos, missing imports, obvious config errors where the cause is immediately clear
• Enter the loop when: verdict is LIKELY_MATCH, WEAK_SIGNAL, or NO_MATCH, the user asks for deep investigation, the initial diagnosis feels superficial, or a previous fix attempt didn't hold

Efficiency

• Terminal output: current phase, key findings (one line each), status changes, failures. No verbose reasoning
• Agent context: minimum needed per job. Pass symptom + relevant findings, not full conversation history
• Load convergence rules reference on demand only when entering iteration

Phase 1: INVESTIGATE — Gather Evidence and Trace Root Cause

Goal: Understand what's actually failing and why, not just what it looks like.

1. Search debugging memory — use the debugger search MCP tool with the symptom. Note any related incidents
2. Reproduce the issue — identify exact steps, commands, or conditions that trigger the bug
3. Deploy root-cause-investigator agent — pass the symptom and reproduction steps for causal tree analysis. The agent explores multiple branches (not a single chain), prioritizes by evidence strength, and prunes with evidence
4. Research gate — if the investigator flags unfamiliar error codes, library behavior, or version-specific issues:
   • Search externally (WebSearch, Context7, or documentation)
   • Document what was searched and what was found
   • If search is unavailable, document what SHOULD be searched
5. Assess completeness — does the investigation explain ALL reported symptoms? Check for multi-causal bugs (2+ independent root causes)

Output: Causal tree (with confirmed and pruned branches), reproduction steps, evidence gathered, research performed

Phase 2: HYPOTHESIZE — State the Root Cause

Goal: Commit to a specific, testable hypothesis before writing any fix.

1. State the root cause hypothesis with evidence level:
   • Strong: Multiple evidence types (code, logs, reproduction) all point to this cause
   • Moderate: Some direct evidence plus reasonable inference
   • Weak: Mostly inference, limited direct evidence — consider investigating other branches first
2. Predict verification test: If this hypothesis is correct, what specific test would prove it?
3. Predict related symptoms: What else should be affected if this root cause is real?
4. If multiple hypotheses exist, rank by evidence strength. Pursue the strongest first

Output: Hypothesis statement, evidence level, prediction test, related symptom predictions

Phase 3: FIX — Implement Targeted Change

Goal: Make the minimal change that addresses the hypothesized root cause.

1. Fix the root cause, not the symptom — if you're adding a null check instead of fixing why something is null, you're fixing the symptom
2. Minimal changes — touch only what's needed. Don't refactor, don't improve, don't clean up
3. Note exactly what was changed and why — this becomes the evidence trail

Output: List of changes with rationale

Phase 4: VERIFY — Test the Fix with Evidence

Goal: Collect concrete evidence that the fix works.

1. Run the prediction test from Phase 2 — does it confirm the hypothesis?
2. Run the original reproduction steps — is the symptom gone?
3. Run related test suite — do existing tests still pass?
4. Check for regressions — run broader test suite if available
5. Verify related symptom predictions — are the predicted effects present?

Every verification step must produce evidence: command output, test results, or observable behavior. "It should work" is not evidence.

Output: Evidence for each verification step

Phase 5: SCORE — Evaluate Against Criteria

Goal: Objective pass/fail assessment with evidence.

Score against these criteria:

All criteria must have evidence. No criterion marked PASS without proof.

If any criterion fails → enter iteration (Phase 6 rules apply) If all criteria pass → proceed to critique (Phase 6)

Output: Scorecard with pass/fail per criterion and evidence

Phase 6: CRITIQUE — Pressure-Test Before Declaring Done

Goal: Challenge the fix before the user relies on it.

1. Deploy fix-critique agent with:
   • The symptom
   • The causal tree from investigation (confirmed branch path + pruned branches)
   • The fix (what was changed)
   • The verification evidence
2. Evaluate verdict:
   • APPROVED → proceed to REPORT
   • CHALLENGED → the concerns become input for the next iteration. Route back to INVESTIGATE with the specific challenges as new investigation targets

The critique agent checks 5 things:

• Root cause vs symptom fix
• Symptom coverage (similar bugs elsewhere)
• Regression risk
• Evidence verification
• Causal tree consistency

Phase 7: REPORT — Transparent Status

Goal: Clear, honest summary. No overclaiming.

Transparency Markers

Every item in the report gets one marker:

• ✅ Verified: Checked with evidence (test output, reproduction, command results)
• ⚠️ Assumed: Believed to be true based on reasoning, but not verified with a test
• ❓ Unknown: Not checked at all — explicitly acknowledged gaps

Report Contents

1. Verdict: Fixed (all criteria pass + critique approved) or Unresolved (iteration limit hit)
2. Root Cause: The identified cause with evidence level
3. Causal Tree: The investigation path — confirmed branches, pruned branches with rejection evidence, any multi-causal findings
4. Fix Applied: What was changed, with rationale
5. Scorecard: Final pass/fail per criterion with evidence
6. Research Used: What was searched externally, what was found, what sources
7. Iteration History (if >1 iteration): What was tried, what failed, what changed between iterations
8. Remaining Gaps: Anything marked ⚠️ or ❓

After Reporting

• Store the incident via the debugger store MCP tool for future retrieval
• Record the outcome via the debugger outcome MCP tool
• Write state to .claude-code-debugger/debug-loop/scorecard.md

Iteration Rules

When any criterion fails or the critique is CHALLENGED, iterate:

1. Diagnose why the criterion failed — don't blind retry
2. Revise the hypothesis if verification disproved it
3. Create targeted fix plan for failed criteria only
4. Execute fix
5. Re-verify ONLY failed criteria — don't re-run passing checks
6. Re-score and re-critique

Convergence Detection

Load references/convergence-rules.md for detailed rules and escalation templates.

Summary:

• Same hypothesis fails 2x → escalate to user ("I've tried this approach twice — the hypothesis may be wrong or there's a constraint I'm not seeing")
• Fix A breaks criterion B (oscillation) → flag as coupled issue, present both sides, ask user
• 3+ criteria fail after a fix → systemic issue, stop loop and reassess the approach entirely
• New regression detected → fix is causing side effects, reconsider the approach
• Hard stop at 5 iterations → report what's known and what isn't. Never silently loop beyond 5

State Tracking

Write iteration state to .claude-code-debugger/debug-loop/state.json:

{
  "symptom": "original symptom",
  "iteration": 1,
  "phase": "VERIFY",
  "hypotheses": [
    {
      "iteration": 1,
      "hypothesis": "description",
      "evidence_level": "strong | moderate | weak",
      "result": "confirmed | disproved | partial",
      "evidence": "what was found"
    }
  ],
  "scorecard": [
    {
      "criterion": "symptom_resolved",
      "result": "PASS | FAIL",
      "evidence": "summary"
    }
  ],
  "critique_verdict": "APPROVED | CHALLENGED | pending",
  "changes_made": ["file:change summary"]
}

Create the directory with mkdir -p .claude-code-debugger/debug-loop/ before writing.

Process Flow

MEMORY SEARCH → INVESTIGATE → HYPOTHESIZE → FIX → VERIFY → SCORE
                                                       ↓
                                                  All pass? ──yes──→ CRITIQUE ──approved──→ REPORT
                                                       ↓                  ↓
                                                      no            challenged
                                                       ↓                  ↓
                                                  ITERATE ←──────────────┘
                                                 (up to 5x)

Anti-Patterns to Avoid