Uefi Bootkit Prsstn

Analyzing UEFI Bootkit Persistence

When to Use

• A compromised system re-establishes C2 communication after OS reinstallation or disk replacement
• Secure Boot has been tampered with, disabled, or shows unexpected Machine Owner Key (MOK) enrollment
• Firmware integrity verification fails against vendor-provided baselines
• Memory forensics reveals rootkit components loading during early boot phase
• Investigating advanced persistent threat (APT) campaigns known to deploy UEFI implants
• Auditing firmware security posture for enterprise endpoint hardening

Do not use for standard MBR-based bootkits on legacy BIOS systems without UEFI; use MBR/VBR bootkit analysis instead.

Prerequisites

• chipsec framework for SPI flash dumping, UEFI variable inspection, and firmware security modules
• UEFITool / UEFIExtract for firmware volume parsing and DXE driver extraction
• Python 3.8+ with struct, hashlib, subprocess, and os modules
• Bootable Linux live USB for offline analysis (avoid running compromised OS)
• Volatility 3 for memory forensics of boot-phase artifacts
• YARA with UEFI malware rule sets for pattern-based detection
• Access to vendor firmware baselines for integrity comparison

Workflow

Step 1: Dump SPI Flash Firmware

Acquire the UEFI firmware from the SPI flash chip for offline analysis:

# Using chipsec to dump SPI flash contents
python chipsec_util.py spi dump firmware_dump.rom

# Using flashrom as an alternative
flashrom -p internal -r firmware_dump.rom

# Verify dump integrity
sha256sum firmware_dump.rom

# Read SPI flash descriptor information
python chipsec_util.py spi info

# Check SPI flash region access permissions
python chipsec_main.py -m common.spi_access

# Verify BIOS write protection is enabled
python chipsec_main.py -m common.bios_wp

# Check SPI flash controller lock
python chipsec_main.py -m common.spi_lock

Step 2: Inspect UEFI Variables

Enumerate and analyze UEFI variables for unauthorized modifications:

# List all UEFI variables on a live system
python chipsec_util.py uefi var-list

# List UEFI variables from a SPI flash dump
python chipsec_util.py uefi var-list-spi firmware_dump.rom

# Read specific Secure Boot variables
python chipsec_util.py uefi var-read SecureBoot 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read SetupMode 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read PK 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read KEK 8BE4DF61-93CA-11D2-AA0D-00E098032B8C
python chipsec_util.py uefi var-read db D719B2CB-3D3A-4596-A3BC-DAD00E67656F

# Dump UEFI key databases for analysis
python chipsec_util.py uefi keys

# Check Secure Boot configuration module
python chipsec_main.py -m common.secureboot.variables

Step 3: Analyze EFI System Partition (ESP)

Inspect the ESP for unauthorized or modified boot components:

# Mount ESP (typically the first FAT32 partition, ~100-500MB)
mkdir /mnt/esp
mount /dev/sda1 /mnt/esp

# List all files on ESP with timestamps
find /mnt/esp -type f -exec ls -la {} \;

# Check for BlackLotus indicators - custom directory under ESP:/system32/
ls -la /mnt/esp/system32/ 2>/dev/null

# Verify Windows Boot Manager signature
sigcheck -a /mnt/esp/EFI/Microsoft/Boot/bootmgfw.efi

# Hash all EFI binaries for comparison against known-good values
find /mnt/esp -name "*.efi" -exec sha256sum {} \;

# Check for unauthorized .efi files outside standard directories
find /mnt/esp -name "*.efi" | grep -v "Microsoft\|Boot\|ubuntu\|grub"

# Look for grubx64.efi planted by BlackLotus
find /mnt/esp -name "grubx64.efi" -exec sha256sum {} \;

# Examine MeasuredBoot logs for anomalies (Windows)
# Logs located at C:\Windows\Logs\MeasuredBoot\

Step 4: Scan Firmware for Known Bootkit Signatures

Analyze the firmware dump for known UEFI malware patterns:

# Extract all firmware modules with UEFIExtract
UEFIExtract firmware_dump.rom all

# Generate firmware module whitelist from vendor baseline
python chipsec_main.py -m tools.uefi.whitelist -a generate,baseline.json,firmware_vendor.rom

# Compare current firmware against whitelist
python chipsec_main.py -m tools.uefi.whitelist -a check,baseline.json,firmware_dump.rom

# Scan firmware with UEFI-specific YARA rules
yara -r uefi_bootkits.yar firmware_dump.rom

# Scan extracted modules individually
find firmware_dump.rom.dump -name "*.efi" -exec yara -r uefi_bootkits.yar {} \;

# Check for modified CORE_DXE module (targeted by MoonBounce, CosmicStrand)
# Compare GUID and hash against vendor baseline

Step 5: Detect Secure Boot Bypass Mechanisms

Check for known Secure Boot bypass techniques:

# Check if Secure Boot is enabled
python chipsec_main.py -m common.secureboot.variables

# Verify SMM (System Management Mode) protections
python chipsec_main.py -m common.smm

# Check SMM BIOS write protection
python chipsec_main.py -m common.bios_smi

# On Windows - check boot configuration for bypass indicators
bcdedit /enum firmware
bcdedit /v

# Check for testsigning/nointegritychecks/debug flags
bcdedit | findstr /i "testsigning nointegritychecks debug"

# Verify HVCI (Hypervisor-enforced Code Integrity) is not disabled
# BlackLotus sets HKLM:\...\DeviceGuard\...\HypervisorEnforcedCodeIntegrity Enabled=0
reg query "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity" /v Enabled

# Check Secure Boot state via PowerShell
# Confirm-SecureBootUEFI returns True if properly enabled

Step 6: Perform Boot Chain Integrity Verification

Verify every component in the boot chain from firmware through kernel:

# Verify firmware integrity against vendor hash
sha256sum firmware_dump.rom
# Compare with vendor-published hash

# Verify bootloader signatures
sigcheck -a C:\Windows\Boot\EFI\bootmgfw.efi
sigcheck -a C:\Windows\System32\winload.efi
sigcheck -a C:\Windows\System32\ntoskrnl.exe

# Check for unsigned or invalid boot drivers
sigcheck -u -e C:\Windows\System32\drivers\

# Analyze Measured Boot logs for unexpected EFI_Boot_Services_Application entries
# BlackLotus components appear as EV_EFI_Boot_Services_Application

# Memory forensics for boot-phase artifacts
vol3 -f memory.dmp windows.modules
vol3 -f memory.dmp windows.driverscan

Step 7: Document UEFI Bootkit Analysis Findings

Compile a comprehensive analysis report:

Report should include:
- Firmware version, vendor, and platform identification
- SPI flash protection status (write protect, lock bits, access control)
- Secure Boot configuration and any bypass indicators detected
- UEFI variable anomalies (unauthorized keys, modified db/dbx, MOK enrollment)
- ESP contents inventory with hash verification against known-good baselines
- Firmware module comparison against vendor whitelist (added, modified, removed)
- Known bootkit family attribution with confidence level
- Boot chain integrity verification results for each component
- Remediation steps (reflash, key rotation, hardware replacement)
- MITRE ATT&CK mapping (T1542.001 - System Firmware, T1542.003 - Bootkit)

Key Concepts

Tools & Systems

• chipsec: Intel framework for dumping SPI flash, reading UEFI variables, verifying firmware write protection, and Secure Boot configuration auditing
• UEFITool: Open-source UEFI firmware image parser for inspecting firmware volumes, extracting DXE drivers, and comparing module GUIDs
• sigcheck: Sysinternals utility for verifying digital signatures of EFI binaries and boot chain components
• flashrom: Open-source SPI flash programmer for reading and writing firmware chips on supported platforms
• YARA: Pattern matching engine used with UEFI-specific rule sets to detect known bootkit signatures in firmware dumps

Common Scenarios

Scenario: Investigating Persistent Compromise Surviving OS Reinstallation

Context: An enterprise endpoint was reimaged after a confirmed breach, but identical C2 beaconing resumed within hours. The endpoint has UEFI firmware with Secure Boot enabled, and a TPM 2.0 chip. The security team suspects a UEFI-level implant similar to BlackLotus or LoJax.

Approach:

1. Boot the system from a trusted Linux live USB to avoid executing any compromised OS components
2. Dump SPI flash firmware using chipsec_util.py spi dump for offline analysis
3. Mount the ESP and hash all .efi files for comparison against known-good values from identical hardware
4. Check for the ESP:/system32/ directory (BlackLotus indicator) and unauthorized grubx64.efi
5. Extract firmware modules with UEFIExtract and compare GUID inventory against vendor baseline
6. Verify Secure Boot variables -- look for unauthorized MOK enrollment or modified db/dbx
7. Check SPI flash write protection and lock bits using chipsec modules
8. Scan firmware dump and extracted modules with UEFI-specific YARA rules
9. If BlackLotus is suspected, check registry for HVCI disabled and MeasuredBoot logs for anomalous entries

Pitfalls:

• Running analysis from the compromised OS (rootkit components hide from live analysis)
• Only checking the ESP without examining SPI flash firmware (misses firmware-level implants like LoJax, MoonBounce)
• Assuming Secure Boot prevents all bootkits (CVE-2022-21894 and other bypasses exist)
• Not preserving the original firmware dump before remediation (critical forensic evidence)
• Reflashing firmware without verifying the vendor image is authentic and unmodified

Output Format

UEFI BOOTKIT PERSISTENCE ANALYSIS REPORT
============================================
System:           Lenovo ThinkPad X1 Carbon Gen 11
Firmware:         N3HET82W (1.54) - Lenovo UEFI BIOS
Platform:         Intel 13th Gen (Raptor Lake)
TPM:              2.0 (Infineon SLB 9672)
Secure Boot:      ENABLED (BYPASSED via CVE-2022-21894)
Analysis Method:  Linux live USB + chipsec + UEFITool

SPI FLASH PROTECTION STATUS
BIOS Write Protection:    DISABLED [!]
SPI Flash Lock (FLOCKDN): SET [OK]
SMM BIOS Write Protect:   DISABLED [!]
SPI Protected Ranges:     Region 0 only (descriptor)

UEFI VARIABLE ANALYSIS
SecureBoot:        Enabled (value=1)
SetupMode:         Disabled (value=0)
PK:                Lenovo Ltd. (legitimate)
KEK:               Microsoft + Lenovo (legitimate)
db:                MODIFIED - contains unauthorized entry [!]
  [!] Unknown certificate: CN=Secure Boot Signing, O=Unknown
  [!] Not present in vendor baseline db
MOK:               1 unauthorized key enrolled [!]
  [!] MOK enrolled: CN=shim, self-signed, not from distro vendor

ESP PARTITION ANALYSIS
Total EFI binaries:     12
Verified (signed):      9
Modified (hash mismatch): 2 [!]
Unauthorized:           1 [!]

  [!] EFI/Microsoft/Boot/bootmgfw.efi - MODIFIED
      Expected SHA-256: a3f2c8...
      Current SHA-256:  7b1e4d...
      Signature:        Valid (signed with unauthorized MOK)

  [!] EFI/Microsoft/Boot/grubx64.efi - UNAUTHORIZED
      SHA-256:  e9c1a7...
      Not present in vendor baseline
      Matches BlackLotus stage-2 loader signature

  [!] system32/ directory present on ESP (BlackLotus artifact)
      Directory empty (files deleted post-installation)

FIRMWARE MODULE ANALYSIS
Total firmware modules:   312
Vendor baseline modules:  312
Added modules:            0
Modified modules:         0
SPI flash integrity:      CLEAN (no firmware-level implant detected)

BOOTKIT ATTRIBUTION
Family:           BlackLotus
Confidence:       HIGH
Persistence:      ESP-based (not SPI flash)
Bypass Method:    CVE-2022-21894 (baton drop)
MITRE ATT&CK:    T1542.003 (Bootkit), T1553.006 (Code Signing Policy Modification)

INDICATORS OF COMPROMISE
- ESP:/system32/ directory (empty, post-cleanup artifact)
- ESP:/EFI/Microsoft/Boot/grubx64.efi (unauthorized, BlackLotus loader)
- Modified bootmgfw.efi (re-signed with attacker MOK)
- HVCI disabled via registry: DeviceGuard\...\Enabled = 0
- Unauthorized MOK enrollment in UEFI variable store
- MeasuredBoot log shows EV_EFI_Boot_Services_Application for grubx64.efi

REMEDIATION
1. Replace bootmgfw.efi with authentic copy from Windows installation media
2. Delete unauthorized grubx64.efi and system32/ directory from ESP
3. Reset Secure Boot keys to factory defaults (clear MOK, restore PK/KEK/db)
4. Enable BIOS write protection and verify SPI flash lock bits
5. Apply firmware update to latest version (patches CVE-2022-21894)
6. Enable HVCI and verify via Group Policy
7. Reimport only trusted certificates into Secure Boot db
8. Monitor MeasuredBoot logs for anomalous boot component loading