Research Paper Writing

Research Paper Writing Pipeline

End-to-end pipeline for producing publication-ready ML/AI research papers targeting NeurIPS, ICML, ICLR, ACL, AAAI, and COLM. This skill covers the full research lifecycle: experiment design, execution, monitoring, analysis, paper writing, review, revision, and submission.

This is not a linear pipeline — it is an iterative loop. Results trigger new experiments. Reviews trigger new analysis. The agent must handle these feedback loops.

┌─────────────────────────────────────────────────────────────┐
│                    RESEARCH PAPER PIPELINE                  │
│                                                             │
│  Phase 0: Project Setup ──► Phase 1: Literature Review      │
│       │                          │                          │
│       ▼                          ▼                          │
│  Phase 2: Experiment     Phase 5: Paper Drafting ◄──┐      │
│       Design                     │                   │      │
│       │                          ▼                   │      │
│       ▼                    Phase 6: Self-Review      │      │
│  Phase 3: Execution &           & Revision ──────────┘      │
│       Monitoring                 │                          │
│       │                          ▼                          │
│       ▼                    Phase 7: Submission               │
│  Phase 4: Analysis ─────► (feeds back to Phase 2 or 5)     │
│                                                             │
└─────────────────────────────────────────────────────────────┘

When To Use This Skill

Use this skill when:

• Starting a new research paper from an existing codebase or idea
• Designing and running experiments to support paper claims
• Writing or revising any section of a research paper
• Preparing for submission to a specific conference
• Responding to reviews with additional experiments or revisions
• Converting a paper between conference formats

Core Philosophy

1. Be proactive. Deliver complete drafts, not questions. Scientists are busy — produce something concrete they can react to, then iterate.
2. Never hallucinate citations. AI-generated citations have ~40% error rate. Always fetch programmatically. Mark unverifiable citations as [CITATION NEEDED].
3. Paper is a story, not a collection of experiments. Every paper needs one clear contribution stated in a single sentence. If you can't do that, the paper isn't ready.
4. Experiments serve claims. Every experiment must explicitly state which claim it supports. Never run experiments that don't connect to the paper's narrative.
5. Commit early, commit often. Every completed experiment batch, every paper draft update — commit with descriptive messages. Git log is the experiment history.

Proactivity and Collaboration

Default: Be proactive. Draft first, ask with the draft.

Block for input only when: target venue unclear, multiple contradictory framings, results seem incomplete, explicit request to review first.

Phase 0: Project Setup

Goal: Establish the workspace, understand existing work, identify the contribution.

Step 0.1: Explore the Repository

# Understand project structure
ls -la
find . -name "*.py" | head -30
find . -name "*.md" -o -name "*.txt" | xargs grep -l -i "result\|conclusion\|finding"

Look for:

• README.md — project overview and claims
• results/, outputs/, experiments/ — existing findings
• configs/ — experimental settings
• .bib files — existing citations
• Draft documents or notes

Step 0.2: Organize the Workspace

Establish a consistent workspace structure:

workspace/
  paper/               # LaTeX source, figures, compiled PDFs
  experiments/         # Experiment runner scripts
  code/                # Core method implementation
  results/             # Raw experiment results (auto-generated)
  tasks/               # Task/benchmark definitions
  human_eval/          # Human evaluation materials (if needed)

Step 0.3: Set Up Version Control

git init  # if not already
git remote add origin <repo-url>
git checkout -b paper-draft  # or main

Git discipline: Every completed experiment batch gets committed with a descriptive message. Example:

Add Monte Carlo constrained results (5 runs, Sonnet 4.6, policy memo task)
Add Haiku baseline comparison: autoreason vs refinement baselines at cheap model tier

Step 0.4: Identify the Contribution

Before writing anything, articulate:

• The What: What is the single thing this paper contributes?
• The Why: What evidence supports it?
• The So What: Why should readers care?

Propose to the scientist: "Based on my understanding, the main contribution is: [one sentence]. The key results show [Y]. Is this the framing you want?"

Step 0.5: Create a TODO List

Use the todo tool to create a structured project plan:

Research Paper TODO:
- [ ] Define one-sentence contribution
- [ ] Literature review (related work + baselines)
- [ ] Design core experiments
- [ ] Run experiments
- [ ] Analyze results
- [ ] Write first draft
- [ ] Self-review (simulate reviewers)
- [ ] Revise based on review
- [ ] Submission prep

Update this throughout the project. It serves as the persistent state across sessions.

Phase 1: Literature Review

Goal: Find related work, identify baselines, gather citations.

Step 1.1: Identify Seed Papers

Start from papers already referenced in the codebase:

# Via terminal:
grep -r "arxiv\|doi\|cite" --include="*.md" --include="*.bib" --include="*.py"
find . -name "*.bib"

Step 1.2: Search for Related Work

Load the arxiv skill for structured paper discovery: skill_view("arxiv"). It provides arXiv REST API search, Semantic Scholar citation graphs, author profiles, and BibTeX generation.

Use web_search for broad discovery, web_extract for fetching specific papers:

# Via web_search:
web_search("[main technique] + [application domain] site:arxiv.org")
web_search("[baseline method] comparison ICML NeurIPS 2024")

# Via web_extract (for specific papers):
web_extract("https://arxiv.org/abs/2303.17651")

Additional search queries to try:

Search queries:
- "[main technique] + [application domain]"
- "[baseline method] comparison"
- "[problem name] state-of-the-art"
- Author names from existing citations

Recommended: Install Exa MCP for real-time academic search:

claude mcp add exa -- npx -y mcp-remote "https://mcp.exa.ai/mcp"

Step 1.3: Verify Every Citation

NEVER generate BibTeX from memory. ALWAYS fetch programmatically.

For each citation, follow the mandatory 5-step process:

Citation Verification (MANDATORY per citation):
1. SEARCH → Query Semantic Scholar or Exa MCP with specific keywords
2. VERIFY → Confirm paper exists in 2+ sources (Semantic Scholar + arXiv/CrossRef)
3. RETRIEVE → Get BibTeX via DOI content negotiation (programmatically, not from memory)
4. VALIDATE → Confirm the claim you're citing actually appears in the paper
5. ADD → Add verified BibTeX to bibliography
If ANY step fails → mark as [CITATION NEEDED], inform scientist

# Fetch BibTeX via DOI
import requests

def doi_to_bibtex(doi: str) -> str:
    response = requests.get(
        f"https://doi.org/{doi}",
        headers={"Accept": "application/x-bibtex"}
    )
    response.raise_for_status()
    return response.text

If you cannot verify a citation:

\cite{PLACEHOLDER_author2024_verify_this}  % TODO: Verify this citation exists

Always tell the scientist: "I've marked [X] citations as placeholders that need verification."

See references/citation-workflow.md for complete API documentation and the full CitationManager class.

Step 1.4: Organize Related Work

Group papers by methodology, not paper-by-paper:

Good: "One line of work uses X's assumption [refs] whereas we use Y's assumption because..." Bad: "Smith et al. introduced X. Jones et al. introduced Y. We combine both."

Phase 2: Experiment Design

Goal: Design experiments that directly support paper claims. Every experiment must answer a specific question.

Step 2.1: Map Claims to Experiments

Create an explicit mapping:

Rule: If an experiment doesn't map to a claim, don't run it.

Step 2.2: Design Baselines

Strong baselines are what separates accepted papers from rejected ones. Reviewers will ask: "Did they compare against X?"

Standard baseline categories:

• Naive baseline: Simplest possible approach
• Strong baseline: Best known existing method
• Ablation baselines: Your method minus one component
• Compute-matched baselines: Same compute budget, different allocation

Step 2.3: Define Evaluation Protocol

Before running anything, specify:

• Metrics: What you're measuring, direction symbols (higher/lower better)
• Aggregation: How results are combined across runs/tasks
• Statistical tests: What tests will establish significance
• Sample sizes: How many runs/problems/tasks

Step 2.4: Write Experiment Scripts

Follow these patterns from successful research pipelines:

Incremental saving — save results after each step for crash recovery:

# Save after each problem/task
result_path = f"results/{task}/{strategy}/result.json"
if os.path.exists(result_path):
    continue  # Skip already-completed work
# ... run experiment ...
with open(result_path, 'w') as f:
    json.dump(result, f, indent=2)

Artifact preservation — save all intermediate outputs:

results/<experiment>/
  <task>/
    <strategy>/
      final_output.md          # Final result
      history.json             # Full trajectory
      pass_01/                 # Per-iteration artifacts
        version_a.md
        version_b.md
        critic.md

Separation of concerns — keep generation, evaluation, and visualization separate:

run_experiment.py              # Core experiment runner
run_baselines.py               # Baseline comparison
run_comparison_judge.py        # Blind evaluation
analyze_results.py             # Statistical analysis
make_charts.py                 # Visualization

See references/experiment-patterns.md for complete design patterns, cron monitoring, and error recovery.

Phase 3: Experiment Execution & Monitoring

Goal: Run experiments reliably, monitor progress, recover from failures.

Step 3.1: Launch Experiments

Use nohup for long-running experiments:

nohup python run_experiment.py --config config.yaml > logs/experiment_01.log 2>&1 &
echo $!  # Record the PID

Parallel execution: Run independent experiments simultaneously, but be aware of API rate limits. 4+ concurrent experiments on the same API will slow each down.

Step 3.2: Set Up Monitoring (Cron Pattern)

For long-running experiments, set up periodic status checks. The cron prompt should follow this template:

Monitor Prompt Template:
1. Check if process is still running: ps aux | grep <pattern>
2. Read last 30 lines of log: tail -30 <logfile>
3. Check for completed results: ls <result_dir>
4. If results exist, read and report: cat <result_file>
5. If all done, commit: git add -A && git commit -m "<descriptive message>" && git push
6. Report in structured format (tables with key metrics)
7. Answer the key analytical question for this experiment

Silent mode: If nothing has changed since the last check, respond with [SILENT] to suppress notification to the user. Only report when there's news.

Step 3.3: Handle Failures

Common failure modes and recovery:

Key: Scripts should always check for existing results and skip completed work. This makes re-runs safe and efficient.

Step 3.4: Commit Completed Results

After each experiment batch completes:

git add -A
git commit -m "Add <experiment name>: <key finding in 1 line>"
git push

Phase 4: Result Analysis

Goal: Extract findings, compute statistics, identify the story.

Step 4.1: Aggregate Results

Write analysis scripts that:

1. Load all result files from a batch
2. Compute per-task and aggregate metrics
3. Generate summary tables

# Standard analysis pattern
import json, os
from pathlib import Path

results = {}
for result_file in Path("results/").rglob("result.json"):
    data = json.loads(result_file.read_text())
    strategy = result_file.parent.name
    task = result_file.parent.parent.name
    results.setdefault(strategy, {})[task] = data

# Compute aggregate metrics
for strategy, tasks in results.items():
    scores = [t["score"] for t in tasks.values()]
    print(f"{strategy}: mean={np.mean(scores):.1f}, std={np.std(scores):.1f}")

Step 4.2: Statistical Significance

Always compute:

• Error bars: Standard deviation or standard error, specify which
• Confidence intervals: 95% CI for key results
• Pairwise tests: McNemar's test for comparing two methods
• Effect sizes: Cohen's d or h for practical significance

See references/experiment-patterns.md for complete implementations of McNemar's test, bootstrapped CIs, and Cohen's h.

Step 4.3: Identify the Story

After analysis, explicitly answer:

1. What is the main finding? State it in one sentence.
2. What surprised you? Unexpected results often make the best papers.
3. What failed? Failed experiments can be the most informative. Honest reporting of failures strengthens the paper.
4. What follow-up experiments are needed? Results often raise new questions.

Step 4.4: Create Figures and Tables

Figures:

• Use vector graphics (PDF) for all plots: plt.savefig('fig.pdf')
• Colorblind-safe palettes (Okabe-Ito or Paul Tol)
• Self-contained captions — reader should understand without main text
• No title inside figure — the caption serves this function

Tables:

• Use booktabs LaTeX package
• Bold best value per metric
• Include direction symbols (higher/lower better)
• Consistent decimal precision

\usepackage{booktabs}
\begin{tabular}{lcc}
\toprule
Method & Accuracy $\uparrow$ & Latency $\downarrow$ \\
\midrule
Baseline & 85.2 & 45ms \\
\textbf{Ours} & \textbf{92.1} & 38ms \\
\bottomrule
\end{tabular}

Step 4.5: Decide: More Experiments or Write?

Iterative Refinement: Strategy Selection

Any output in this pipeline — paper drafts, experiment scripts, analysis — can be iteratively refined. The autoreason research provides empirical evidence for when each refinement strategy works and when it fails. Use this section to choose the right approach.

Quick Decision Table

The Generation-Evaluation Gap

Core insight: Autoreason's value depends on the gap between a model's generation capability and its self-evaluation capability.

Model Tier        │ Generation │ Self-Eval │ Gap    │ Autoreason Value
──────────────────┼────────────┼───────────┼────────┼─────────────────
Weak (Llama 8B)   │ Poor       │ Poor      │ Small  │ None — can't generate diverse candidates
Mid (Haiku 3.5)   │ Decent     │ Poor      │ LARGE  │ MAXIMUM — 42/42 perfect Borda
Mid (Gemini Flash)│ Decent     │ Moderate  │ Large  │ High — wins 2/3
Strong (Sonnet 4) │ Good       │ Decent    │ Medium │ Moderate — wins 3/5
Frontier (S4.6)   │ Excellent  │ Good      │ Small  │ Only with constraints

This gap is structural, not temporary. As costs drop, today's frontier becomes tomorrow's mid-tier. The sweet spot moves but never disappears.

Autoreason Loop (Summary)

Each pass produces three candidates from fresh, isolated agents:

1. Critic → finds problems in incumbent A (no fixes)
2. Author B → revises A based on critique
3. Synthesizer → merges A and B (randomized labels)
4. Judge Panel → 3 blind CoT judges rank A, B, AB via Borda count
5. Convergence → A wins k=2 consecutive passes → done

Key parameters:

• k=2 convergence (k=1 premature, k=3 too expensive, no quality gain)
• CoT judges always (3x faster convergence)
• Temperature 0.8 authors, 0.3 judges
• Conservative tiebreak: incumbent wins ties
• Every role is a fresh agent with no shared context

Applying to Paper Drafts

When refining the paper itself through autoreason:

• Provide ground truth to the critic: actual experimental data, result JSONs, statistical outputs. Without this, models hallucinate fabricated ablation studies and fake confidence intervals.
• Use 3 working judges minimum: A broken judge parser doesn't add noise — it prevents equilibrium entirely.
• Scope constrain the revision: "Address these specific weaknesses" not "improve the paper."

Failure Modes

See references/autoreason-methodology.md for complete prompts, Borda scoring details, model selection guide, scope constraint design patterns, and compute budget reference.

Phase 5: Paper Drafting

Goal: Write a complete, publication-ready paper.

The Narrative Principle

The single most critical insight: Your paper is not a collection of experiments — it's a story with one clear contribution supported by evidence.

Every successful ML paper centers on what Neel Nanda calls "the narrative": a short, rigorous, evidence-based technical story with a takeaway readers care about.

Three Pillars (must be crystal clear by end of introduction):

If you cannot state your contribution in one sentence, you don't yet have a paper.

Time Allocation

Spend approximately equal time on each of:

1. The abstract
2. The introduction
3. The figures
4. Everything else combined

Why? Most reviewers form judgments before reaching your methods. Readers encounter your paper as: title → abstract → introduction → figures → maybe the rest.

Writing Workflow

Paper Writing Checklist:
- [ ] Step 1: Define the one-sentence contribution
- [ ] Step 2: Draft Figure 1 (core idea or most compelling result)
- [ ] Step 3: Draft abstract (5-sentence formula)
- [ ] Step 4: Draft introduction (1-1.5 pages max)
- [ ] Step 5: Draft methods
- [ ] Step 6: Draft experiments & results
- [ ] Step 7: Draft related work
- [ ] Step 8: Draft conclusion & discussion
- [ ] Step 9: Draft limitations (REQUIRED by all venues)
- [ ] Step 10: Plan appendix (proofs, extra experiments, details)
- [ ] Step 11: Complete paper checklist
- [ ] Step 12: Final review

Step 5.0: Title

The title is the single most-read element of the paper. It determines whether anyone clicks through to the abstract.

Good titles:

• State the contribution or finding: "Autoreason: When Iterative LLM Refinement Works and Why It Fails"
• Highlight a surprising result: "Scaling Data-Constrained Language Models" (implies you can)
• Name the method + what it does: "DPO: Direct Preference Optimization of Language Models"

Bad titles:

• Too generic: "An Approach to Improving Language Model Outputs"
• Too long: anything over ~15 words
• Jargon-only: "Asymptotic Convergence of Iterative Stochastic Policy Refinement" (who is this for?)

Rules:

• Include your method name if you have one (for citability)
• Include 1-2 keywords reviewers will search for
• Avoid colons unless both halves carry meaning
• Test: would a reviewer know the domain and contribution from the title alone?

Step 5.1: Abstract (5-Sentence Formula)

From Sebastian Farquhar (DeepMind):

1. What you achieved: "We introduce...", "We prove...", "We demonstrate..."
2. Why this is hard and important
3. How you do it (with specialist keywords for discoverability)
4. What evidence you have
5. Your most remarkable number/result

Delete generic openings like "Large language models have achieved remarkable success..."

Step 5.2: Figure 1

Figure 1 is the second thing most readers look at (after abstract). Draft it before writing the introduction — it forces you to clarify the core idea.

Rules: Figure 1 must be understandable without reading any text. The caption alone should communicate the core idea. Use color purposefully — don't just decorate.

Step 5.3: Introduction (1-1.5 pages max)

Must include:

• Clear problem statement
• Brief approach overview
• 2-4 bullet contribution list (max 1-2 lines each in two-column format)
• Methods should start by page 2-3

Step 5.3: Methods

Enable reimplementation:

• Conceptual outline or pseudocode
• All hyperparameters listed
• Architectural details sufficient for reproduction
• Present final design decisions; ablations go in experiments

Step 5.4: Experiments & Results

For each experiment, explicitly state:

• What claim it supports
• How it connects to main contribution
• What to observe: "the blue line shows X, which demonstrates Y"

Requirements:

• Error bars with methodology (std dev vs std error)
• Hyperparameter search ranges
• Compute infrastructure (GPU type, total hours)
• Seed-setting methods

Step 5.5: Related Work

Organize methodologically, not paper-by-paper. Cite generously — reviewers likely authored relevant papers.

Step 5.6: Limitations (REQUIRED)

All major conferences require this. Honesty helps:

• Reviewers are instructed not to penalize honest limitation acknowledgment
• Pre-empt criticisms by identifying weaknesses first
• Explain why limitations don't undermine core claims

Step 5.7: Conclusion & Discussion

Conclusion (required, 0.5-1 page):

• Restate the contribution in one sentence (different wording from abstract)
• Summarize key findings (2-3 sentences, not a list)
• Implications: what does this mean for the field?
• Future work: 2-3 concrete next steps (not vague "we leave X for future work")

Discussion (optional, sometimes combined with conclusion):

• Broader implications beyond immediate results
• Connections to other subfields
• Honest assessment of when the method does and doesn't work
• Practical deployment considerations

Do NOT introduce new results or claims in the conclusion.

Step 5.8: Appendix Strategy

Appendices are unlimited at all major venues and are essential for reproducibility. Structure:

Rules:

• The main paper must be self-contained — reviewers are not required to read appendices
• Never put critical evidence only in the appendix
• Cross-reference: "Full results in Table 5 (Appendix B)" not just "see appendix"
• Use \appendix command, then \section{A: Proofs} etc.

Page Budget Management

When over the page limit:

Do NOT: reduce font size, change margins, remove required sections (limitations, broader impact), or use \small/\footnotesize for main text.

Writing Style

Sentence-level clarity (Gopen & Swan's 7 Principles):

Word choice (Lipton, Steinhardt):

• Be specific: "accuracy" not "performance"
• Eliminate hedging: drop "may" unless genuinely uncertain
• Consistent terminology throughout
• Avoid incremental vocabulary: "develop", not "combine"

Full writing guide with examples: See references/writing-guide.md

Using LaTeX Templates

Always copy the entire template directory first, then write within it.

Template Setup Checklist:
- [ ] Step 1: Copy entire template directory to new project
- [ ] Step 2: Verify template compiles as-is (before any changes)
- [ ] Step 3: Read the template's example content to understand structure
- [ ] Step 4: Replace example content section by section
- [ ] Step 5: Use template macros (check preamble for \newcommand definitions)
- [ ] Step 6: Clean up template artifacts only at the end

Step 1: Copy the Full Template

cp -r templates/neurips2025/ ~/papers/my-paper/
cd ~/papers/my-paper/
ls -la  # Should see: main.tex, neurips.sty, Makefile, etc.

Copy the ENTIRE directory, not just the .tex file. Templates include style files (.sty), bibliography styles (.bst), example content, and Makefiles.

Step 2: Verify Template Compiles First

Before making ANY changes:

latexmk -pdf main.tex
# Or manual: pdflatex main.tex && bibtex main && pdflatex main.tex && pdflatex main.tex

If the unmodified template doesn't compile, fix that first (usually missing TeX packages — install via tlmgr install <package>).

Step 3: Keep Template Content as Reference

Don't immediately delete example content. Comment it out and use as formatting reference:

% Template example (keep for reference):
% \begin{figure}[t]
%   \centering
%   \includegraphics[width=0.8\linewidth]{example-image}
%   \caption{Template shows caption style}
% \end{figure}

% Your actual figure:
\begin{figure}[t]
  \centering
  \includegraphics[width=0.8\linewidth]{your-figure.pdf}
  \caption{Your caption following the same style.}
\end{figure}

Step 4: Replace Content Section by Section

Work through systematically: title/authors → abstract → introduction → methods → experiments → related work → conclusion → references → appendix. Compile after each section.

Step 5: Use Template Macros

\newcommand{\method}{YourMethodName}  % Consistent method naming
\newcommand{\eg}{e.g.,\xspace}        % Proper abbreviations
\newcommand{\ie}{i.e.,\xspace}

Template Pitfalls

Quick Template Reference

Universal: Double-blind, references don't count, appendices unlimited, LaTeX required.

Templates in templates/ directory. See templates/README.md for compilation setup (VS Code, CLI, Overleaf, other IDEs).

Tables and Figures

Tables — use booktabs for professional formatting:

\usepackage{booktabs}
\begin{tabular}{lcc}
\toprule
Method & Accuracy $\uparrow$ & Latency $\downarrow$ \\
\midrule
Baseline & 85.2 & 45ms \\
\textbf{Ours} & \textbf{92.1} & 38ms \\
\bottomrule
\end{tabular}

Rules:

• Bold best value per metric
• Include direction symbols ($\uparrow$ higher better, $\downarrow$ lower better)
• Right-align numerical columns
• Consistent decimal precision

Figures:

• Vector graphics (PDF, EPS) for all plots and diagrams — plt.savefig('fig.pdf')
• Raster (PNG 600 DPI) only for photographs
• Colorblind-safe palettes (Okabe-Ito or Paul Tol)
• Verify grayscale readability (8% of men have color vision deficiency)
• No title inside figure — the caption serves this function
• Self-contained captions — reader should understand without main text

Conference Resubmission

For converting between venues, see Phase 7 (Submission Preparation) — it covers the full conversion workflow, page-change table, and post-rejection guidance.

Professional LaTeX Preamble

Add these packages to any paper for professional quality. They are compatible with all major conference style files:

% --- Professional Packages (add after conference style file) ---

% Typography
\usepackage{microtype}              % Microtypographic improvements (protrusion, expansion)
                                     % Makes text noticeably more polished — always include

% Tables
\usepackage{booktabs}               % Professional table rules (\toprule, \midrule, \bottomrule)
\usepackage{siunitx}                % Consistent number formatting, decimal alignment
                                     % Usage: \num{12345} → 12,345; \SI{3.5}{GHz} → 3.5 GHz
                                     % Table alignment: S column type for decimal-aligned numbers

% Figures
\usepackage{graphicx}               % Include graphics (\includegraphics)
\usepackage{subcaption}             % Subfigures with (a), (b), (c) labels
                                     % Usage: \begin{subfigure}{0.48\textwidth} ... \end{subfigure}

% Diagrams and Algorithms
\usepackage{tikz}                   % Programmable vector diagrams
\usetikzlibrary{arrows.meta, positioning, shapes.geometric, calc, fit, backgrounds}
\usepackage[ruled,vlined]{algorithm2e}  % Professional pseudocode
                                     % Alternative: \usepackage{algorithmicx} if template bundles it

% Cross-references
\usepackage{cleveref}               % Smart references: \cref{fig:x} → "Figure 1"
                                     % MUST be loaded AFTER hyperref
                                     % Handles: figures, tables, sections, equations, algorithms

% Math (usually included by conference .sty, but verify)
\usepackage{amsmath,amssymb}        % AMS math environments and symbols
\usepackage{mathtools}              % Extends amsmath (dcases, coloneqq, etc.)

% Colors (for figures and diagrams)
\usepackage{xcolor}                 % Color management
% Okabe-Ito colorblind-safe palette:
\definecolor{okblue}{HTML}{0072B2}
\definecolor{okorange}{HTML}{E69F00}
\definecolor{okgreen}{HTML}{009E73}
\definecolor{okred}{HTML}{D55E00}
\definecolor{okpurple}{HTML}{CC79A7}
\definecolor{okcyan}{HTML}{56B4E9}
\definecolor{okyellow}{HTML}{F0E442}

Notes:

• microtype is the single highest-impact package for visual quality. It adjusts character spacing at a sub-pixel level. Always include it.
• siunitx handles decimal alignment in tables via the S column type — eliminates manual spacing.
• cleveref must be loaded after hyperref. Most conference .sty files load hyperref, so put cleveref last.
• Check if the conference template already loads any of these (especially algorithm, amsmath, graphicx). Don't double-load.

siunitx Table Alignment

siunitx makes number-heavy tables significantly more readable:

\begin{tabular}{l S[table-format=2.1] S[table-format=2.1] S[table-format=2.1]}
\toprule
Method & {Accuracy $\uparrow$} & {F1 $\uparrow$} & {Latency (ms) $\downarrow$} \\
\midrule
Baseline         & 85.2  & 83.7  & 45.3 \\
Ablation (no X)  & 87.1  & 85.4  & 42.1 \\
\textbf{Ours}    & \textbf{92.1} & \textbf{90.8} & \textbf{38.7} \\
\bottomrule
\end{tabular}

The S column type auto-aligns on the decimal point. Headers in {} escape the alignment.

Subfigures

Standard pattern for side-by-side figures:

\begin{figure}[t]
  \centering
  \begin{subfigure}[b]{0.48\textwidth}
    \centering
    \includegraphics[width=\textwidth]{fig_results_a.pdf}
    \caption{Results on Dataset A.}
    \label{fig:results-a}
  \end{subfigure}
  \hfill
  \begin{subfigure}[b]{0.48\textwidth}
    \centering
    \includegraphics[width=\textwidth]{fig_results_b.pdf}
    \caption{Results on Dataset B.}
    \label{fig:results-b}
  \end{subfigure}
  \caption{Comparison of our method across two datasets. (a) shows the scaling
  behavior and (b) shows the ablation results. Both use 5 random seeds.}
  \label{fig:results}
\end{figure}

Use \cref{fig:results} → "Figure 1", \cref{fig:results-a} → "Figure 1a".

Pseudocode with algorithm2e

\begin{algorithm}[t]
\caption{Iterative Refinement with Judge Panel}
\label{alg:method}
\KwIn{Task $T$, model $M$, judges $J_1 \ldots J_n$, convergence threshold $k$}
\KwOut{Final output $A^*$}
$A \gets M(T)$ \tcp*{Initial generation}
$\text{streak} \gets 0$\;
\While{$\text{streak} < k$}{
  $C \gets \text{Critic}(A, T)$ \tcp*{Identify weaknesses}
  $B \gets M(T, C)$ \tcp*{Revised version addressing critique}
  $AB \gets \text{Synthesize}(A, B)$ \tcp*{Merge best elements}
  \ForEach{judge $J_i$}{
    $\text{rank}_i \gets J_i(\text{shuffle}(A, B, AB))$ \tcp*{Blind ranking}
  }
  $\text{winner} \gets \text{BordaCount}(\text{ranks})$\;
  \eIf{$\text{winner} = A$}{
    $\text{streak} \gets \text{streak} + 1$\;
  }{
    $A \gets \text{winner}$; $\text{streak} \gets 0$\;
  }
}
\Return{$A$}\;
\end{algorithm}

TikZ Diagram Patterns

TikZ is the standard for method diagrams in ML papers. Common patterns:

Pipeline/Flow Diagram (most common in ML papers):

\begin{figure}[t]
\centering
\begin{tikzpicture}[
  node distance=1.8cm,
  box/.style={rectangle, draw, rounded corners, minimum height=1cm, 
              minimum width=2cm, align=center, font=\small},
  arrow/.style={-{Stealth[length=3mm]}, thick},
]
  \node[box, fill=okcyan!20] (input) {Input\\$x$};
  \node[box, fill=okblue!20, right of=input] (encoder) {Encoder\\$f_\theta$};
  \node[box, fill=okgreen!20, right of=encoder] (latent) {Latent\\$z$};
  \node[box, fill=okorange!20, right of=latent] (decoder) {Decoder\\$g_\phi$};
  \node[box, fill=okred!20, right of=decoder] (output) {Output\\$\hat{x}$};
  
  \draw[arrow] (input) -- (encoder);
  \draw[arrow] (encoder) -- (latent);
  \draw[arrow] (laten

…(truncated)