Analog Spec Extract
Reads L1_DATASHEET.json (pin types, electrical specs) and L5_ADI_SPEC.json (analog-digital interface) to enumerate every analog block that needs transistor-level design, and produces a machine-readable spec.json for each.
⛔ HARD RULE — never silently emit empty block list (Wave 47, v0.120.1)
User directive (Wave 47): "EVERY ITEM IN DESIGN DOCUMENTS SHOULD BE IMPLEMENTED!!!! EVERY!!!"
Read the complete source documents and enumerate every required analog block
in L5 and the analog plan. Include functionally described blocks that a keyword
search misses. Mark missing implementation as design work rather than an
aggregate analog-skip pass.
A keyword hit is a candidate, not a requirement. Confirm the block's function,
count and specifications from its own source enumeration. A product-name hit
alone does not establish an oscillator, regulator or other analog block.
When to use
- At the start of the analog design track (Step A1)
- After Phase 1 or Phase 1 has produced L1 + L5 layer documents
- When the user asks "what analog blocks does this chip need?"
Inputs
generated_docs/L1_DATASHEET.json — pin definitions, electrical characteristics
generated_docs/L5_ADI_SPEC.json — analog-digital interface signals, protection, trim
Analog block taxonomy
Classify the analog block from its actual source function and electrical requirements. Confirm its topology and model requirements rather than treating a name keyword as the specification.
| Type |
Typical names |
Key specs |
| LDO |
ldo, regulator, vreg |
Vout, Vin range, Iload, PSRR, dropout, Iq |
| Bandgap |
bgr, bandgap, vref |
Vref, TC (ppm/°C), PSRR, noise |
| Oscillator |
osc, rc_osc, ring_osc |
Frequency, accuracy, power, jitter |
| POR |
por, power_on_reset |
Trip voltage, hysteresis, delay |
| Comparator |
comp, comparator |
Offset, propagation delay, Vin range |
| ADC |
adc, sar_adc |
Resolution, sample rate, INL/DNL, ENOB |
| DAC |
dac |
Resolution, settling time, INL/DNL |
| PLL |
pll, dpll |
Lock range, jitter, loop BW |
| Charge pump |
cp, charge_pump |
Output current, compliance range |
| OTA/OpAmp |
ota, opamp |
Gain, UGB, PM, noise, CMRR |
| Bias |
bias, ibias, current_ref |
Accuracy, TC, compliance |
| Level shifter |
ls, level_shift |
Delay, Vin/Vout range |
Workflow
- Read L1 and L5 with their original source documents.
- Enumerate required analog blocks, protection circuits and trim functions.
- Classify each block by its actual electrical function and bind its min,
typ, max, units and operating conditions to the source requirements.
- Identify the digital control and observation interfaces, supplies and loads.
- Write the block list and per-block specification. Disclose any unresolved
requirement before topology or sizing consumes it.
Output format
analog/analog_block_list.json
{
"blocks": [
{"name": "ldo_1v8", "type": "LDO", "spec_file": "analog/ldo_1v8/spec.json"},
{"name": "por", "type": "POR", "spec_file": "analog/por/spec.json"}
],
"block_count": 2
}
analog/<block>/spec.json
{
"block_name": "ldo_1v8",
"block_type": "LDO",
"supply": {"nom_v": 3.3, "min_v": 2.7, "max_v": 5.5},
"specs": {
"vout": {"min": 1.75, "typ": 1.80, "max": 1.85, "unit": "V"},
"iload_max": {"typ": 50, "unit": "mA"},
"iq": {"max": 60, "unit": "uA"},
"psrr_1khz": {"min": 40, "unit": "dB"}
},
"interface": {
"inputs": ["vin", "en"],
"outputs": ["vout"],
"digital_ctrl": ["trim[2:0]"]
},
"constraints": {
"area_budget_um2": null,
"power_budget_uw": null
}
}
Handoff
analog/<block>/spec.json → /analog-topology-select (Step A2)
analog/analog_block_list.json → triggers the analog track in the flow
Captured rule
Carry the structured pin attributes supplied by Phase 1 through L9 into the
analog spec consumer, including the voltage-domain name and source description.
Names, order, missing fields and stated/derived authority must survive.
The IC expert records a chip's source-backed pin values in its Phase 1 result;
quoted prose does not authorize a program to infer electrical attributes.
Keep unresolved pin questions open and native noise/supply measurements separate
from interface documentation completeness.
1---2name: analog-spec-extract3description: Extract analog block specifications from L1/L5 design documents into machine-readable spec.json per block. Use when starting the analog design track, or when the user says "extract analog specs", "what analog blocks do we need", "analog block list".4metadata:5 source: https://skillmd.com/skills/vibeic/analog-spec-extract6---78# Analog Spec Extract910Reads L1_DATASHEET.json (pin types, electrical specs) and L5_ADI_SPEC.json (analog-digital interface) to enumerate every analog block that needs transistor-level design, and produces a machine-readable `spec.json` for each.1112## ⛔ HARD RULE — never silently emit empty block list (Wave 47, v0.120.1)1314User directive (Wave 47): **"EVERY ITEM IN DESIGN DOCUMENTS SHOULD BE IMPLEMENTED!!!! EVERY!!!"**1516Read the complete source documents and enumerate every required analog block17in L5 and the analog plan. Include functionally described blocks that a keyword18search misses. Mark missing implementation as design work rather than an19aggregate analog-skip pass.2021A keyword hit is a candidate, not a requirement. Confirm the block's function,22count and specifications from its own source enumeration. A product-name hit23alone does not establish an oscillator, regulator or other analog block.2425## When to use2627- At the start of the analog design track (Step A1)28- After Phase 1 or Phase 1 has produced L1 + L5 layer documents29- When the user asks "what analog blocks does this chip need?"3031## Inputs32331. `generated_docs/L1_DATASHEET.json` — pin definitions, electrical characteristics342. `generated_docs/L5_ADI_SPEC.json` — analog-digital interface signals, protection, trim3536## Analog block taxonomy3738Classify the analog block from its actual source function and electrical requirements. Confirm its topology and model requirements rather than treating a name keyword as the specification.3940| Type | Typical names | Key specs |41|------|--------------|-----------|42| LDO | ldo, regulator, vreg | Vout, Vin range, Iload, PSRR, dropout, Iq |43| Bandgap | bgr, bandgap, vref | Vref, TC (ppm/°C), PSRR, noise |44| Oscillator | osc, rc_osc, ring_osc | Frequency, accuracy, power, jitter |45| POR | por, power_on_reset | Trip voltage, hysteresis, delay |46| Comparator | comp, comparator | Offset, propagation delay, Vin range |47| ADC | adc, sar_adc | Resolution, sample rate, INL/DNL, ENOB |48| DAC | dac | Resolution, settling time, INL/DNL |49| PLL | pll, dpll | Lock range, jitter, loop BW |50| Charge pump | cp, charge_pump | Output current, compliance range |51| OTA/OpAmp | ota, opamp | Gain, UGB, PM, noise, CMRR |52| Bias | bias, ibias, current_ref | Accuracy, TC, compliance |53| Level shifter | ls, level_shift | Delay, Vin/Vout range |5455## Workflow56571. Read L1 and L5 with their original source documents.582. Enumerate required analog blocks, protection circuits and trim functions.593. Classify each block by its actual electrical function and bind its min,60 typ, max, units and operating conditions to the source requirements.614. Identify the digital control and observation interfaces, supplies and loads.625. Write the block list and per-block specification. Disclose any unresolved63 requirement before topology or sizing consumes it.6465## Output format6667### `analog/analog_block_list.json`68```json69{70 "blocks": [71 {"name": "ldo_1v8", "type": "LDO", "spec_file": "analog/ldo_1v8/spec.json"},72 {"name": "por", "type": "POR", "spec_file": "analog/por/spec.json"}73 ],74 "block_count": 275}76```7778### `analog/<block>/spec.json`79```json80{81 "block_name": "ldo_1v8",82 "block_type": "LDO",83 "supply": {"nom_v": 3.3, "min_v": 2.7, "max_v": 5.5},84 "specs": {85 "vout": {"min": 1.75, "typ": 1.80, "max": 1.85, "unit": "V"},86 "iload_max": {"typ": 50, "unit": "mA"},87 "iq": {"max": 60, "unit": "uA"},88 "psrr_1khz": {"min": 40, "unit": "dB"}89 },90 "interface": {91 "inputs": ["vin", "en"],92 "outputs": ["vout"],93 "digital_ctrl": ["trim[2:0]"]94 },95 "constraints": {96 "area_budget_um2": null,97 "power_budget_uw": null98 }99}100```101102## Handoff103104- `analog/<block>/spec.json` → `/analog-topology-select` (Step A2)105- `analog/analog_block_list.json` → triggers the analog track in the flow106107## Captured rule108109Carry the structured pin attributes supplied by Phase 1 through L9 into the110analog spec consumer, including the voltage-domain name and source description.111Names, order, missing fields and stated/derived authority must survive.112The IC expert records a chip's source-backed pin values in its Phase 1 result;113quoted prose does not authorize a program to infer electrical attributes.114Keep unresolved pin questions open and native noise/supply measurements separate115from interface documentation completeness.