Tapeout Checklist
Captured rule — pad-ring site resolution, per-side fit and abutment
Review pad-ring site resolution, per-side fit and abutment for the
self-tape-out path. The current producer is flow_chip_inputs.prepare with
_pad_ring; read its results against the declared pads and pad-library
geometry. The retired pad_ring_check and pad_ring_gen are not entry points.
Review every applicable native tool result before a GDS handoff. Read
<project>/reports/flow_engine.json produced by the normal public runner;
flow/steps.json supplies the current row positions and names. The Router's
selected window runs through the sole engine path. Do not introduce another
execution or approval layer.
For each selected row, open the native files named in reports and inspect
tool_ran, native_steps, native_metrics, and the value/operator/original
limit in metrics. Confirm the intended design, corner and tool actually ran.
AI review each native result for physical plausibility, missing coverage and
engineering risk, retaining the existing per-row review and its measured
duration. Missing native data or an absent original limit is NOT_MEASURED;
it cannot be turned into PASS by an archive, report format or summary.
Keep spec, PDK and owner limits unchanged. Failed, deferred or unmeasured work remains open. Record any owner-accepted engineering exception with its actual scope and risk; an exception does not make the unexecuted measurement pass.
Portable design-release archive
The existing packaging producer writes release_manifest.json, SHA256SUMS
and a relative archive/ tree. The manifest separates final-GDS design
material, retained internal STA/SDC/SPEF and logic/electrical closure, external
PDK/tool dependencies, and the provider upload subset. A file's presence does
not qualify its signoff: existing producer readers must measure the selected
final-GDS subject, and incomplete or failed measurements remain incomplete.
Manufacturing-service PENDING_FOUNDRY_* fields are not seven universal gates.
For a new version without changing the source project:
python3 programs/foundry_handoff_pack_gen.py <project> --out-dir <new-version-dir>
python3 programs/foundry_handoff_package_check.py <new-version-dir> \
--package-dir <new-version-dir> --json <check-output.json>
--out-dir must not already exist; old versions are retained. A provider die
assembly is selected only through its producer-owned --release-record and
die_finishing_gen.read_admitted_release, never an arbitrary GDS override.
Use the packaging checker's existing --design-release mode when checking
technical release completion; its compatibility mode reports LEGACY_SKELETON.
A relocated check validates the retained archive; it does not
rerun EDA or claim provider submission/order acceptance. Slot, CoB and IDs
must come from the actual selected provider inputs and current precheck.
Read the actual measurements
Use the selected native tool results for SPEF parasitic extraction, post-route MCMM STA, IR/EM/antenna/SI, post-layout gate simulation, SPICE correlation, ECO, metal fill, FPGA final recompile, and analog work when applicable. A smaller subset of successful reports cannot establish completion of those obligations. For static IR-drop, keep the actual declared budget; the existing budget reader can inspect the native report without moving that budget:
python3 plugins/vibe-ic/programs/ir_drop_budget_check.py \
<ir_report_or_dir> --vdd <V> --budget-pct 10
The command's 10 percent budget applies only when it is the actual original
requirement; it does not replace a stricter spec or PDK limit. Use each run's
native report paths and disclose every selected FAIL or NOT_MEASURED item
in the final report, along with any deferred obligation and its real risk.
When to use
- Final 1–2 weeks before GDS release
- After the final ECO
- As a nightly regression item for any design in the "tapeout window"
Review the required engineering results
- Functional simulation and required code/functional/assertion coverage meet their original targets. Formal results disclose the proved property, assumptions and any bounded depth. Native equivalence reports compare the required RTL and netlist with actual comparison points.
- Native STA covers the required setup, hold, recovery/removal, pulse-width, transition and capacitance checks at the original MCMM corners.
- Native IR-drop and EM values meet the actual spec and library budgets. Review the current density, power grid and switching-activity basis.
- Native DRC, LVS, antenna, metal-density and ERC results meet the actual PDK
rules. An absent report or an unexamined layout remains
NOT_MEASURED. - DFT/ATPG, scan, BIST and test-access results meet the original foundry or owner requirements. Missing DFT data does not establish completion.
- Package, pad, release and manufacturing inputs match the selected provider's actual requirements and the measured design scope.
Read the actual native report for each obligation and review its engineering meaning. Retain original numeric limits and explicit owner exceptions. Do not substitute file presence, a signature or an archive hash for a measurement.
Handoff
- Any red item routes back to its owning skill (
/sta-review,/drc-fix, etc.) - After applicable native measurements meet their original limits, follow the owner's authorized GDS release workflow.
Captured rule — the die is the PDK seal frame, not the box of every layer
When tapeout_precheck reports a die that is larger than declared and off the
origin by the same amount on every side, look at WHICH layer reaches outside
before touching the floorplan or the declaration. A PDK seal generator may
draw its own identification marker beyond the die: the SKY130 generator
(advSeal_6um_gen) puts its ring 1.8 um inside the die and also draws the
corner area marker 81/51 as an octagon of radius 152.4 um centred on each die
corner, so three quarters of it lie outside.
die_origin_and_size therefore measures a DIE with an inside seal ring on the
frame the native seal step measured (seal_ring_verification.json: the ring
layers it found by measurement and their offset from each die edge; no layer
number is declared in the plugin). The strict half stays: any top-level cell
or shape outside that frame that is not one of the cells the seal step added
to the top cell FAILS the check and is listed in outside_die_frame. If the
seal step's layouts cannot be read, no cell is excused. Without a seal
measurement the check is the whole-layout box, as before. The limit (the
declared die) is unchanged.
Native, image 0.4.76, tapeout_precheck row replayed from retained states:
Subservient IC (sky130A, subservient-ic-precheck-frame-r3-i0476-claude)
layout box (-152.4, -152.4, 2320.4, 980.4), seal frame (0, 0, 2168, 828) =
declared die, seal cells advSeal_6um_gen, nothing else outside: row FAIL ->
PASS. SPM IC (gf180mcuD, spm-ic-precheck-frame-r3-i0476-claude) box, frame
and declared die all (0, 0, 3195, 991): PASS -> PASS, same numbers.