Antigravity

--- name: loop-engineer description: > Loop engineering wizard for Antigravity. Asks 3 questions, then orchestrates a fully autonomous parallel agent team (resource-scout, researcher, planner, agent-factory, executor, verifier, auditor, memory-keeper) until the goal is met. Uses invoke_subagent for true parallel dispatch. Researcher agents use the built-in research TypeName. Modes: build (from scratch), research (investigate only), patch (fix/extend existing code), audit (review only, no changes). Persistent memory, git integration.

Loop Engineer (Antigravity)

You are running a loop engineering wizard. Follow these phases in order.

Prerequisite — reduce permission friction: confirmed via antigravity.google/docs/permissions — file reads/writes inside your active project are auto-allowed by default, so that part shouldn't interrupt you. command(...) actions (every terminal/bash call — including the init script, and every git commit the executor makes) default to Ask unless you've added an allow rule. Before running an autonomous loop, add an Allow rule for the commands this loop needs (at minimum command(bash), or command(*) for zero friction) via Antigravity's permission settings — either the in-editor approval-card "expand scope" option the first time a command prompts, or your project/user settings directly. Without this, the loop will pause on every single Bash call, which defeats "fully autonomous."

To update loop-engineer: re-run install.sh --update / install.ps1 -Update -Antigravity. Updates are never applied automatically mid-loop.

Phase 1 — Core Wizard

Q1 — Mode: if invoked with an argument matching build/research/patch/audit, use it as MODE and skip this question. Otherwise ask: "Mode? build (new from scratch) / research (investigate and report, no code changes) / patch (fix or add a feature using the existing codebase) / audit (review existing code/output only, no changes)". Default to build if unclear.

Q2: "What do you want the loop to accomplish? (1-2 sentences)"

Generate LOOP_ID: lowercase slug, first 4 meaningful words, max 24 chars. Auto-set: STOP_CONDITION = "all tasks in loop-stack//PLAN.md checked", MAX_TURNS = 20.

Q3: "Should the loop auto-commit after each verified task? (yes / no)"

Phase 2+3 — Initialize Loop

Run the init script — tries all three Antigravity surface paths automatically:

Bash (macOS/Linux):

INIT_SCRIPT="$(ls \
  "$HOME/.gemini/antigravity-cli/skills/loop-engineer/scripts/init-loop.sh" \
  "$HOME/.gemini/antigravity/skills/loop-engineer/scripts/init-loop.sh" \
  "$HOME/.gemini/config/skills/loop-engineer/scripts/init-loop.sh" 2>/dev/null | head -1)"
bash "$INIT_SCRIPT" \
  --loop-id <LOOP_ID> \
  --goal "<GOAL>" \
  --stop "all tasks in loop-stack/<LOOP_ID>/PLAN.md checked" \
  --git <yes/no> \
  --mode <MODE> \
  --platform antigravity

PowerShell (Windows):

$init = @(
  "$env:USERPROFILE\.gemini\antigravity-cli\skills\loop-engineer\scripts\init-loop.ps1",
  "$env:USERPROFILE\.gemini\antigravity\skills\loop-engineer\scripts\init-loop.ps1",
  "$env:USERPROFILE\.gemini\config\skills\loop-engineer\scripts\init-loop.ps1"
) | Where-Object { Test-Path $_ } | Select-Object -First 1
& $init -LoopId "<LOOP_ID>" -Goal "<GOAL>" `
  -Stop "all tasks in loop-stack/<LOOP_ID>/PLAN.md checked" `
  -Git <yes/no> -Mode <MODE> -Platform antigravity

If the script is missing, install the skill first: git clone https://github.com/vibhasdutta/loop-engineer && bash install.sh --antigravity

The script creates loop-stack/<LOOP_ID>/, .agents/ with all agent .md files + knowledge-sources/, and verifier.md with the actual stop condition substituted.

Phase 4 — Startup Sequence

How parallel dispatch actually works in Antigravity: confirmed via official docs (antigravity.google/docs/subagents) — there is no "Subagents array" parameter. The real mechanism: calling invoke_subagent spawns a subagent that "immediately begins executing its task" and "runs asynchronously in the background, allowing the parent agent to delegate a task and immediately resume its own work." So to get true concurrency, call invoke_subagent multiple times back-to-back in the same turn — each call returns right away without blocking, so N calls in a row dispatch N subagents running concurrently. Then wait for all of them to send their completion messages before proceeding to the next step.

Nesting limit: a maximum depth of 10 levels of subagents-of-subagents is enforced. Not a concern for loop-engineer's flat dispatch pattern, but worth knowing if an agent-factory-created specialist tries to spawn its own subagents.

IMPORTANT: Subagents start with a clean slate — no parent context. Every Prompt must be fully self-contained with the loop directory path, what to read, what to write, and a reference to the agent's instruction file in .agents/.

Step 1 — Parallel RESEARCHERS (dynamic count)

Determine researcher count by goal complexity:

• Simple/single-domain → 2 researchers
• Medium/multi-domain → 3 researchers
• Large/multi-system → 4 researchers

Call invoke_subagent once per researcher, back-to-back in the same turn (each call returns immediately, so this dispatches all of them concurrently — see note above). Use TypeName: "research" — the built-in type optimized for codebase exploration.

Domains to distribute:

• Context & Prior Work: source structure, patterns, package files, existing tests
• External Knowledge & Resources: README, docs/, external APIs, .env.example, configs
• Requirements & Constraints: DB schema, data models, state management (for 3+ researchers)
• Environment & Integration: CI/CD, infrastructure, build, Docker (for 4 researchers)

Each researcher Prompt:

Loop directory: loop-stack/<LOOP_ID>/
Focus: {ASSIGNED_DOMAIN} — {specific files and concerns}
GLOBAL DATA FIRST: read loop-stack/.global/MEMORY.md and loop-stack/.global/TOOLS.md.
Write findings to loop-stack/<LOOP_ID>/RESEARCH.md under "## {Domain Name}".
Update loop-stack/<LOOP_ID>/STATUS.md "Last Researcher Result".
Read .agents/researcher.md for full instructions.

Stuck-agent check (no watcher subagent needed): Antigravity already exposes manage_subagents(Action: "list") — use it directly if one researcher is taking noticeably longer than its peers, to see whether it's still running or has stalled. If stalled, proceed without it and note {agent}: STUCK — no output in STATUS.md ## Active Heartbeats.

Wait for all researcher subagents to complete before Step 2.

Step 2 — RESOURCE SCOUT

Call invoke_subagent with one entry, TypeName: "self":

Loop directory: loop-stack/<LOOP_ID>/
Check loop-stack/.global/TOOLS.md — if < 7 days old, reuse it.
Otherwise discover all tools. Write to loop-stack/<LOOP_ID>/TOOLS.md AND loop-stack/.global/TOOLS.md.
Read .agents/resource-scout.md for full instructions.

Wait for resource-scout to send its completion message.

Step 3 — PLANNER

Call invoke_subagent with one entry, TypeName: "self":

Loop directory: loop-stack/<LOOP_ID>/
Read RESEARCH.md (all sections) and TOOLS.md.
Task type depends on MODE: build/patch → implementation tasks; research → research/writing tasks only, no code changes; audit → review tasks only, no code changes.
Create 3–7 tasks with parallel group tags [G1], [G2], etc.
Same group = parallel (independent files/modules). Different group = sequential dependency.
Replace "## Tasks" in PLAN.md. Update STATUS.md.
Read .agents/planner.md for full instructions.

Wait for planner to send its completion message.

Write loop-stack/<LOOP_ID>/AGENTS.md with # Specialized Agents\n## Status\nNONE CREATED YET. (Agent-factory is on-demand, not a fixed step — see Rules.) Proceed to Phase 5.

Phase 5 — Outer Loop

FULLY AUTONOMOUS. Never pause for user input.

Initialize: turns_used = 0, skipped_tasks = [].

Mode gating: build (default) — full flow. patch — same steps, but every researcher/executor prompt adds "existing codebase is ground truth — fix/extend, don't rewrite from scratch." research — skip step 5 (executors) and steps 6–7 (audit) entirely; the researcher (step 3) writes each task's final deliverable directly; the verifier checks that instead of built code. audit — skip step 5; the auditor step IS the task (read-only review, findings to RESEARCH.md); a BLOCK verdict is just recorded, never auto-fixed, always proceeds to the verifier.

For parallel steps: call invoke_subagent once per agent, back-to-back in the same turn (each call returns immediately without blocking — see Phase 4 note). Wait for all to send completion messages before proceeding.

Iteration steps:

1. Budget check — over MAX_TURNS → Phase 6.

2. Read state — identify current parallel group (all unchecked [GN] tasks).

3. Parallel RESEARCHERS — one per task (2 if batch=1). Call invoke_subagent once per task, back-to-back in the same turn, TypeName: "research":

   Loop directory: loop-stack/<LOOP_ID>/
   GLOBAL DATA FIRST — read loop-stack/.global/MEMORY.md AND loop-stack/.global/TOOLS.md.
   Focus: {ASSIGNED_DOMAIN} for task: {this_task}
   Append findings to RESEARCH.md under "## Task-Specific Research — {this_task}".
   Update STATUS.md "Last Researcher Result".
   Read .agents/researcher.md for full instructions.
   

   Wait for all. Increment turns_used.

4. Before executors, check AGENTS.md. For every task in the batch that clearly needs domain expertise beyond a generic executor and has no specialist yet, call invoke_subagent once per such task, back-to-back in the same turn (TypeName: "self", each reads .agents/agent-factory.md) to create their agent files and update AGENTS.md — same parallel-first rule as researchers/executors. Wait for all to finish. Skip this for most tasks.

5. Parallel EXECUTORS — one per task. Call invoke_subagent once per task, back-to-back in the same turn, TypeName: "self":

   Loop directory: loop-stack/<LOOP_ID>/
   GLOBAL DATA FIRST — read loop-stack/.global/MEMORY.md AND loop-stack/.global/TOOLS.md.
   Read MEMORY.md, TOOLS.md, PLAN.md, STATUS.md.
   READ: RESEARCH.md "## Task-Specific Research — {this_task}".
   Current task: {this_task}. Scope: only files for this task.
   Implement. Append discoveries to MEMORY.md directly. Update STATUS.md.
   Goal output (code, documents, files) goes to the project directory, NOT inside loop-stack/. loop-stack/ is state-only.
   Read .agents/executor.md for full instructions.
   

   Wait for all. Increment turns_used.

6. Parallel AUDITORS — one per task just built. TypeName: "self". Wait for all.

7. Process audit results:

   • CLEAN/WARN → proceed to verifier
   • BLOCK → auto-fix (one executor with BLOCK context, TypeName: "self", re-run auditor once). Still BLOCK → auto-skip.

8. Parallel VERIFIERS (tasks that passed audit only) — one per task. Verifier is the final gate: checks the task against RESEARCH.md's Verification Criteria (right place, satisfies criteria, no placeholders), then runs the stop condition. TypeName: "self". Wait for all.

9. Process verifier results:

   • PASS → memory-keeper
   • FAIL < 3 → retry from step 3
   • FAIL ≥ 3 → auto-skip

10. MEMORY-KEEPER consolidation — single invoke_subagent, TypeName: "self", local + global write. This is the only memory-keeper call per batch — executors already appended their raw learnings inline during step 5. Wait.

11. Advance — mark [x], git commit if enabled. Find next group. None → ALL DONE → rename loop-stack/<LOOP_ID>/ → loop-stack/<LOOP_ID>_DONE/ → Phase 6.

Phase 6 — Completion Report

Write REPORT.md inside the renamed loop directory and print summary.

Rules

• File copy: try CLI path (~/.gemini/antigravity-cli/skills/), then IDE path (~/.gemini/antigravity/skills/), then 2.0 path (~/.gemini/config/skills/). Never write manually.
• Global data first: every agent reads .global/MEMORY.md + .global/TOOLS.md before acting.
• invoke_subagent: parallel = multiple calls back-to-back in the same turn (each returns immediately, no "Subagents array" parameter exists). Sequential = deliberately waiting for one to finish before calling the next. Wait for completion messages between steps.
• TypeNames: use "research" for researcher agents (built-in, codebase-optimized). Use "self" for all others.
• Self-contained prompts: subagents have a clean context slate — every Prompt must include loop dir, files to read/write, and .agents/{role}.md reference.
• Researcher before executor: always. Dynamic count based on goal complexity.
• Agent-factory is on-demand, not a fixed phase step. Invoke it only right before executing a task that clearly needs a specialist. Most loops never call it.
• knowledge-sources.md is a reference file researchers consult on demand, not a phase step.
• No watcher agent. Use manage_subagents(Action: "list") directly if you need to check whether an agent is still running; never spawn a dedicated watcher subagent.
• No separate evaluator. Verifier is the final gate: checks the task against RESEARCH.md's Verification Criteria, then runs the stop condition. One agent, one call, same rigor — not two sequential subagents for what's really one quality gate.
• Audit before verify. Auditor reviews the build first (step 6); verifier runs last as the final pass/fail gate (step 8) and is what triggers retry.
• Memory-keeper runs once per task batch (after verify, local + global) — not a separate mid-batch checkpoint. Executors already append their own learnings to MEMORY.md directly as they work, so there's nothing left for a checkpoint pass to do that isn't already written. Its only job is capturing learnings/context — never executes the goal or writes goal output.
• Executors append to MEMORY.md directly during work.
• Planner: once at startup. Tasks MUST include [G1]/[G2] parallel group tags.
• Fully autonomous: no pauses. Audit BLOCK → auto-fix once → skip. 3 verifier fails → auto-skip.
• Modes: build (default), research, patch, audit — set once in Phase 1, gates Phase 5 (see above).
• HARD RULE — no plan-approval gate: after Phase 1's questions, proceed through Phase 2 onward without presenting a plan for approval or waiting for a "click proceed" confirmation. Do not use any native plan-then-approve UX for this loop.
• No resume support: every invocation starts a fresh loop. On completion: rename to <LOOP_ID>_DONE/ (bookkeeping only).
• Monitor: use manage_subagents(Action: "list") to check running subagents if needed.
• AGENTS.md: ensure AGENTS.md is in the project root for workspace context.
• MCP config: remote servers require serverUrl field (not url or httpUrl).