Agent Evaluation

Evaluating LLM Agent Systems

Agent evaluation requires fundamentally different approaches than traditional software testing. Agents make dynamic decisions, are non-deterministic, and often lack single correct answers. Effective evaluation must account for these characteristics while providing actionable feedback.

Key insight: LLM-as-a-Judge is not a single technique but a family of approaches, each suited to different evaluation contexts. Choosing the right approach and mitigating known biases is the core competency this skill develops.

When to Activate

• Testing agent performance systematically
• Validating context engineering choices
• Measuring improvements or catching regressions over time
• Building quality gates for agent pipelines
• Comparing different agent configurations or model outputs
• Building automated evaluation pipelines for LLM outputs
• Designing A/B tests for prompt or model changes
• Debugging evaluation systems that show inconsistent results
• Analyzing correlation between automated and human judgments

Decision Tree: Choosing an Evaluation Approach

What are you evaluating?
+-- Agent outputs against known correct answers?
|   +-- Yes --> Direct Scoring (factual accuracy, format compliance, instruction following)
|   +-- No --> Are you comparing two configurations?
|       +-- Yes --> Pairwise Comparison with position-swap protocol
|       |   Criteria: tone, style, persuasiveness, creativity
|       +-- No --> Do you have reference material?
|           +-- Yes --> Reference-based evaluation (summarization, translation)
|           +-- No --> Build rubrics first, then choose approach per dimension

Fundamentals

Why Agent Evaluation Is Different

Non-Determinism and Multiple Valid Paths: Agents may take different valid paths to reach goals. One agent searches three sources while another searches ten. Evaluate outcomes, not specific steps.

Context-Dependent Failures: Agent failures often depend on context in subtle ways. An agent might succeed on simple queries but fail on complex ones. Evaluation must cover a range of complexity levels.

Composite Quality Dimensions: Agent quality spans factual accuracy, completeness, coherence, tool efficiency, and process quality. Single-metric evaluation hides dimension-specific failures.

Performance Drivers: The 95% Finding

Research on the BrowseComp evaluation found that three factors explain 95% of performance variance:

Implications: Evaluate agents with realistic token budgets, not unlimited resources. Model upgrades beat token increases. Multi-agent architectures get validated by distributing work across separate context windows.

The Evaluation Taxonomy

Direct Scoring: A single LLM rates one response on a defined scale.

• Best for: Objective criteria (factual accuracy, instruction following, toxicity)
• Failure mode: Score calibration drift, inconsistent scale interpretation

Pairwise Comparison: An LLM compares two responses and selects the better one.

• Best for: Subjective preferences (tone, style, persuasiveness)
• Failure mode: Position bias, length bias

Research (Zheng et al., 2023) establishes that pairwise comparison achieves higher agreement with human judges than direct scoring for preference-based evaluation, while direct scoring remains appropriate for objective criteria.

End-State Evaluation: For agents that mutate persistent state, evaluate whether the final state matches expectations rather than how the agent got there.

Metric Selection Framework

Critical insight: High absolute agreement matters less than systematic disagreement patterns.

Rubric Design

Multi-Dimensional Rubric

Effective rubrics cover key dimensions with descriptive levels. Well-defined rubrics reduce evaluation variance by 40-60% compared to open-ended scoring.

Rubric Components:

1. Level descriptions: Clear boundaries for each score level
2. Characteristics: Observable features that define each level
3. Examples: Representative text for each level (optional but valuable)
4. Edge cases: Guidance for ambiguous situations
5. Scoring guidelines: General principles for consistent application

Scale Calibration

• 1-3 scales: Binary with neutral option, lowest cognitive load
• 1-5 scales: Standard Likert, good balance of granularity and reliability
• 1-10 scales: High granularity but harder to calibrate, use only with detailed rubrics

Strictness Calibration

• Lenient: Lower bar, appropriate for encouraging iteration
• Balanced: Typical expectations for production use
• Strict: High standards, appropriate for safety-critical evaluation

Domain Adaptation

Rubrics should use domain-specific terminology. A "code readability" rubric mentions variables, functions, and comments. A "medical accuracy" rubric references clinical terminology. Generic rubrics produce generic evaluations.

The Bias Landscape

LLM judges exhibit systematic biases that must be actively mitigated:

Evaluation Approaches in Detail

Direct Scoring Implementation

Prompt Structure for Direct Scoring:

You are an expert evaluator assessing response quality.

## Task
Evaluate the following response against each criterion.

## Original Prompt
{prompt}

## Response to Evaluate
{response}

## Criteria
{for each criterion: name, description, weight}

## Instructions
For each criterion:
1. Find specific evidence in the response
2. Score according to the rubric (1-{max} scale)
3. Justify your score with evidence
4. Suggest one specific improvement

## Output Format
Respond with structured JSON containing scores, justifications, and summary.

Chain-of-Thought Requirement: All scoring prompts must require justification before the score. This improves reliability by 15-25% compared to score-first approaches.

Pairwise Comparison Implementation

Position Bias Mitigation Protocol:

1. First pass: Response A in first position, Response B in second
2. Second pass: Response B in first position, Response A in second
3. Consistency check: If passes disagree, return TIE with reduced confidence
4. Final verdict: Consistent winner with averaged confidence

Prompt Structure for Pairwise Comparison:

You are an expert evaluator comparing two AI responses.

## Critical Instructions
- Do NOT prefer responses because they are longer
- Do NOT prefer responses based on position (first vs second)
- Focus ONLY on quality according to the specified criteria
- Ties are acceptable when responses are genuinely equivalent

## Original Prompt
{prompt}

## Response A
{response_a}

## Response B
{response_b}

## Comparison Criteria
{criteria list}

## Instructions
1. Analyze each response independently first
2. Compare them on each criterion
3. Determine overall winner with confidence level

## Output Format
JSON with per-criterion comparison, overall winner, confidence (0-1), and reasoning.

Confidence Calibration: Both passes agree = average confidences. Passes disagree = 0.5 confidence, verdict = TIE.

Human Evaluation

Human evaluation catches what automation misses: hallucinated answers on unusual queries, system failures, and subtle biases. Use human evaluation to validate and calibrate automated systems.

Test Set Design

Sample Selection

Start with small samples during development. Early in agent development, changes have dramatic impacts because there is abundant low-hanging fruit. Sample from real usage patterns. Add known edge cases. Ensure coverage across complexity levels.

Complexity Stratification

Production Pipeline Design

Evaluation Pipeline Architecture

Input: Response + Prompt + Context
         |
         v
+---------------------+
|   Criteria Loader   | <-- Rubrics, weights
+----------+----------+
           |
           v
+---------------------+
|   Primary Scorer    | <-- Direct or Pairwise
+----------+----------+
           |
           v
+---------------------+
|   Bias Mitigation   | <-- Position swap, etc.
+----------+----------+
           |
           v
+---------------------+
| Confidence Scoring  | <-- Calibration
+----------+----------+
           |
           v
Output: Scores + Justifications + Confidence

Scaling Evaluation

Continuous Evaluation

Build pipelines that run automatically on agent changes. Track results over time. Compare versions to identify regressions. Sample production interactions randomly. Set alerts for quality drops.

Anti-Patterns

Examples

Example 1: Direct Scoring Output

Input: Prompt: "What causes seasons on Earth?" Response correctly identifies axial tilt. Criterion: Factual Accuracy. Scale: 1-5.

{
  "criterion": "Factual Accuracy",
  "score": 5,
  "evidence": ["Correctly identifies axial tilt as primary cause", "Correctly explains differential sunlight by hemisphere"],
  "justification": "Response accurately explains the cause of seasons with correct scientific reasoning.",
  "improvement": "Could add the specific tilt angle (23.5 degrees) for completeness."
}

Example 2: Pairwise Comparison with Position Swap

First pass (A first): { "winner": "B", "confidence": 0.8 } Second pass (B first): { "winner": "A", "confidence": 0.6 } → Mapped: { "winner": "B", "confidence": 0.6 }

Final: { "winner": "B", "confidence": 0.7, "positionConsistency": { "consistent": true } }

If passes disagree → { "winner": "TIE", "confidence": 0.5 }

Guidelines

1. Use multi-dimensional rubrics, not single metrics
2. Evaluate outcomes, not specific execution paths
3. Always require justification before scores (15-25% reliability improvement)
4. Always swap positions in pairwise comparison
5. Match scale granularity to rubric specificity
6. Separate objective criteria (direct scoring) from subjective (pairwise)
7. Include confidence scores calibrated to position consistency
8. Define edge cases explicitly in rubrics
9. Use domain-specific rubric terminology
10. Cover complexity levels from simple to very complex
11. Test with realistic context sizes
12. Run evaluations continuously, not just before release
13. Supplement LLM evaluation with human review
14. Validate against human judgments
15. Monitor for systematic bias by criterion, response type, and model

Building an Evaluation Framework: Step by Step

1. Define quality dimensions relevant to your use case
2. Create rubrics with clear level descriptions and edge cases
3. Choose evaluation approach per dimension (direct vs. pairwise)
4. Build test sets from real usage, stratified by complexity
5. Implement automated evaluation pipelines with bias mitigation
6. Establish baseline metrics before making changes
7. Run evaluations on all significant changes
8. Track metrics over time for trend analysis
9. Supplement with human review
10. Feed disagreements back to improve rubrics

Integration

• context-fundamentals - Evaluating context usage; evaluation prompts require effective context structure
• context-degradation - Detecting and measuring degradation effects
• context-optimization - Measuring optimization effectiveness
• multi-agent-patterns - Evaluating coordination across agents
• tool-design - Evaluating tool effectiveness

References

External research:

• Eugene Yan: Evaluating the Effectiveness of LLM-Evaluators
• Judging LLM-as-a-Judge (Zheng et al., 2023)
• G-Eval: NLG Evaluation using GPT-4 (Liu et al., 2023)
• Large Language Models are not Fair Evaluators (Wang et al., 2023)

Skill Metadata

Created: 2024-12-20 Last Updated: 2026-04-18 Authors: Agent Skills for Context Engineering Contributors, Muratcan Koylan Version: 2.1.0