Configuring AWS Verified Access For Ztna

Configuring AWS Verified Access for ZTNA

Overview

AWS Verified Access is a Zero Trust Network Access (ZTNA) service that provides secure, VPN-less access to corporate applications hosted in AWS. It evaluates each access request in real-time against granular conditional access policies written in the Cedar policy language, ensuring access is granted per-application only when specific security requirements such as user identity and device security posture are met and maintained. Verified Access integrates with AWS IAM Identity Center, third-party identity providers (Okta, CrowdStrike, JumpCloud, Jamf), and device management solutions. For multi-account deployments, AWS Resource Access Manager (RAM) enables sharing Verified Access groups across organizational units.

When to Use

• When deploying or configuring configuring aws verified access for ztna capabilities in your environment
• When establishing security controls aligned to compliance requirements
• When building or improving security architecture for this domain
• When conducting security assessments that require this implementation

Common Misconfigurations & Verification

• Origin still reachable directly: the internal ALB/ENI keeps its own security group and private DNS. If the ALB SG allows 0.0.0.0/0 or a broad VPC range on 443, users skip the Verified Access endpoint entirely. Lock the ALB security group to ONLY the Verified Access security group, never to the world.
• Policy permits without a device signal: a Cedar policy like permit(principal, action, resource) when { context.okta.groups.contains("employees") }; verifies identity but ignores context.crowdstrike.assessment.overall, so an unmanaged laptop passes. Always AND a device-trust clause into group- and endpoint-level policies.
• Device trust provider attached but never referenced: attaching a CrowdStrike/Jamf provider does nothing unless its policy_reference_name appears as a context.<ref> namespace in the Cedar policy. Confirm it is actually evaluated.
• Logging disabled: with no CloudWatch/S3 access logs you cannot prove enforcement. Enable aws_verifiedaccess_instance_logging_configuration before go-live.

Verify: from an off-corp host, resolve and curl -k https://<alb-dns> and the ENI private IP directly; both must refuse/time out, and only the *.edge.vpce-...amazonaws.com endpoint should answer. Then connect from a non-compliant device (stop the CrowdStrike sensor) and confirm a denial in the logs via --filter-pattern '{ $.status_code = "403" }'.

Prerequisites

• AWS account with appropriate IAM permissions
• Identity provider (AWS IAM Identity Center, Okta, or OIDC-compatible)
• Device trust provider (CrowdStrike, Jamf, JumpCloud, or AWS Verified Access native)
• Internal Application Load Balancer (ALB) or network interface endpoint
• Understanding of Cedar policy language
• VPC with application workloads to protect

Architecture

    End User (Browser)
         |
         | HTTPS
         v
  +------+--------+
  | Verified      |
  | Access        |
  | Endpoint      |
  | (Public DNS)  |
  +------+--------+
         |
  +------+--------+
  | Verified      |  <-- Cedar Access Policies
  | Access        |  <-- Identity Provider Signals
  | Instance      |  <-- Device Trust Signals
  | (Policy       |
  |  Evaluation)  |
  +------+--------+
         |
  +------+--------+
  | Verified      |
  | Access Group  |
  | (App Group)   |
  +------+--------+
         |
  +------+--------+
  | Internal ALB  |
  | or ENI Target |
  +------+--------+
         |
  +------+--------+
  | Application   |
  | (Private VPC) |
  +--------------+

Core Components

Verified Access Instance

The regional entity that evaluates access requests against policies.

# Create Verified Access Instance via AWS CLI
aws ec2 create-verified-access-instance \
  --description "Production Zero Trust Instance" \
  --tag-specifications 'ResourceType=verified-access-instance,Tags=[{Key=Environment,Value=production}]'

Trust Providers

Identity Trust Provider (AWS IAM Identity Center)

# Create identity trust provider
aws ec2 create-verified-access-trust-provider \
  --trust-provider-type user \
  --user-trust-provider-type iam-identity-center \
  --policy-reference-name "idc" \
  --description "IAM Identity Center trust provider" \
  --tag-specifications 'ResourceType=verified-access-trust-provider,Tags=[{Key=Type,Value=identity}]'

Identity Trust Provider (OIDC - Okta)

aws ec2 create-verified-access-trust-provider \
  --trust-provider-type user \
  --user-trust-provider-type oidc \
  --oidc-options '{
    "Issuer": "https://company.okta.com/oauth2/default",
    "AuthorizationEndpoint": "https://company.okta.com/oauth2/default/v1/authorize",
    "TokenEndpoint": "https://company.okta.com/oauth2/default/v1/token",
    "UserInfoEndpoint": "https://company.okta.com/oauth2/default/v1/userinfo",
    "ClientId": "0oa1234567890",
    "ClientSecret": "client-secret-here",
    "Scope": "openid profile groups"
  }' \
  --policy-reference-name "okta" \
  --description "Okta OIDC trust provider"

Device Trust Provider (CrowdStrike)

aws ec2 create-verified-access-trust-provider \
  --trust-provider-type device \
  --device-trust-provider-type crowdstrike \
  --device-options '{
    "TenantId": "crowdstrike-tenant-id",
    "PublicSigningKeyUrl": "https://api.crowdstrike.com/zero-trust/v2/certificates"
  }' \
  --policy-reference-name "crowdstrike" \
  --description "CrowdStrike device trust provider"

Attach Trust Providers to Instance

# Attach identity provider
aws ec2 attach-verified-access-trust-provider \
  --verified-access-instance-id vai-0123456789abcdef \
  --verified-access-trust-provider-id vatp-0123456789abcdef

# Attach device provider
aws ec2 attach-verified-access-trust-provider \
  --verified-access-instance-id vai-0123456789abcdef \
  --verified-access-trust-provider-id vatp-device123456

Verified Access Groups

# Create a group for web applications
aws ec2 create-verified-access-group \
  --verified-access-instance-id vai-0123456789abcdef \
  --description "Production Web Applications" \
  --policy-document 'permit(principal, action, resource)
    when {
      context.okta.groups.contains("production-access") &&
      context.crowdstrike.assessment.overall > 50
    };' \
  --tag-specifications 'ResourceType=verified-access-group,Tags=[{Key=Tier,Value=web}]'

Verified Access Endpoints

# Create endpoint for ALB-backed application
aws ec2 create-verified-access-endpoint \
  --verified-access-group-id vag-0123456789abcdef \
  --endpoint-type load-balancer \
  --attachment-type vpc \
  --domain-certificate-arn arn:aws:acm:us-east-1:123456789012:certificate/xxxx \
  --application-domain app.internal.company.com \
  --endpoint-domain-prefix myapp \
  --load-balancer-options '{
    "LoadBalancerArn": "arn:aws:elasticloadbalancing:us-east-1:123456789012:loadbalancer/app/internal-alb/xxxx",
    "Port": 443,
    "Protocol": "https",
    "SubnetIds": ["subnet-abc123", "subnet-def456"]
  }' \
  --security-group-ids sg-0123456789abcdef \
  --description "Internal HR Application"

Cedar Policy Language

Policy Basics

// Allow access for users in the engineering group with compliant devices
permit(principal, action, resource)
when {
    context.okta.groups.contains("engineering") &&
    context.crowdstrike.assessment.overall > 70 &&
    context.crowdstrike.assessment.sensor_config.status == "active"
};

// Deny access from unmanaged devices
forbid(principal, action, resource)
when {
    !context.crowdstrike.assessment.sensor_config.status == "active"
};

Advanced Policy Examples

// Time-based access - only during business hours (UTC)
permit(principal, action, resource)
when {
    context.okta.groups.contains("contractors") &&
    context.http_request.http_method == "GET" &&
    context.crowdstrike.assessment.overall > 80
};

// Restrict admin access to specific user group with high device trust
permit(principal, action, resource)
when {
    context.idc.groups.contains("admins") &&
    context.crowdstrike.assessment.overall > 90 &&
    context.crowdstrike.assessment.os_version.startswith("Windows 11") ||
    context.crowdstrike.assessment.os_version.startswith("macOS 14")
};

// Allow read-only access for lower trust levels
permit(principal, action, resource)
when {
    context.okta.groups.contains("read-only") &&
    context.crowdstrike.assessment.overall > 30 &&
    context.http_request.http_method == "GET"
};

Group-Level vs Endpoint-Level Policies

// Group-level policy (applies to all endpoints in the group)
// Set on the Verified Access Group
permit(principal, action, resource)
when {
    context.okta.groups.contains("employees") &&
    context.crowdstrike.assessment.overall > 50
};

// Endpoint-level policy (additional restrictions for specific app)
// Set on the Verified Access Endpoint
permit(principal, action, resource)
when {
    context.okta.groups.contains("hr-team") &&
    context.okta.email.endsWith("@company.com")
};

Terraform Configuration

terraform {
  required_providers {
    aws = {
      source  = "hashicorp/aws"
      version = "~> 5.0"
    }
  }
}

# Verified Access Instance
resource "aws_verifiedaccess_instance" "main" {
  description = "Production Zero Trust Access"
  tags = {
    Environment = "production"
  }
}

# Identity Trust Provider (OIDC)
resource "aws_verifiedaccess_trust_provider" "okta" {
  policy_reference_name    = "okta"
  trust_provider_type      = "user"
  user_trust_provider_type = "oidc"
  description              = "Okta identity provider"

  oidc_options {
    authorization_endpoint = "https://company.okta.com/oauth2/default/v1/authorize"
    client_id              = var.okta_client_id
    client_secret          = var.okta_client_secret
    issuer                 = "https://company.okta.com/oauth2/default"
    scope                  = "openid profile groups"
    token_endpoint         = "https://company.okta.com/oauth2/default/v1/token"
    user_info_endpoint     = "https://company.okta.com/oauth2/default/v1/userinfo"
  }
}

# Device Trust Provider (CrowdStrike)
resource "aws_verifiedaccess_trust_provider" "crowdstrike" {
  policy_reference_name     = "crowdstrike"
  trust_provider_type       = "device"
  device_trust_provider_type = "crowdstrike"
  description               = "CrowdStrike device trust"

  device_options {
    tenant_id = var.crowdstrike_tenant_id
  }
}

# Attach providers to instance
resource "aws_verifiedaccess_instance_trust_provider_attachment" "okta" {
  verifiedaccess_instance_id       = aws_verifiedaccess_instance.main.id
  verifiedaccess_trust_provider_id = aws_verifiedaccess_trust_provider.okta.id
}

resource "aws_verifiedaccess_instance_trust_provider_attachment" "crowdstrike" {
  verifiedaccess_instance_id       = aws_verifiedaccess_instance.main.id
  verifiedaccess_trust_provider_id = aws_verifiedaccess_trust_provider.crowdstrike.id
}

# Verified Access Group
resource "aws_verifiedaccess_group" "web_apps" {
  verifiedaccess_instance_id = aws_verifiedaccess_instance.main.id
  description                = "Production Web Applications"

  policy_document = <<-CEDAR
    permit(principal, action, resource)
    when {
      context.okta.groups.contains("production-access") &&
      context.crowdstrike.assessment.overall > 50
    };
  CEDAR

  tags = {
    Tier = "web"
  }
}

# Verified Access Endpoint
resource "aws_verifiedaccess_endpoint" "internal_app" {
  verified_access_group_id = aws_verifiedaccess_group.web_apps.id
  endpoint_type            = "load-balancer"
  attachment_type          = "vpc"
  domain_certificate_arn   = aws_acm_certificate.app.arn
  application_domain       = "app.internal.company.com"
  endpoint_domain_prefix   = "myapp"
  description              = "Internal Application"

  load_balancer_options {
    load_balancer_arn = aws_lb.internal.arn
    port              = 443
    protocol          = "https"
    subnet_ids        = var.private_subnet_ids
  }

  security_group_ids = [aws_security_group.verified_access.id]

  policy_document = <<-CEDAR
    permit(principal, action, resource)
    when {
      context.okta.groups.contains("app-users")
    };
  CEDAR
}

# Logging configuration
resource "aws_verifiedaccess_instance_logging_configuration" "main" {
  verifiedaccess_instance_id = aws_verifiedaccess_instance.main.id

  access_logs {
    cloudwatch_logs {
      enabled   = true
      log_group = aws_cloudwatch_log_group.verified_access.name
    }
    s3 {
      enabled     = true
      bucket_name = aws_s3_bucket.access_logs.id
      prefix      = "verified-access/"
    }
  }
}

resource "aws_cloudwatch_log_group" "verified_access" {
  name              = "/aws/verified-access/production"
  retention_in_days = 90
}

Multi-Account Deployment with AWS RAM

# Share Verified Access Group across accounts via RAM
resource "aws_ram_resource_share" "verified_access" {
  name                      = "verified-access-share"
  allow_external_principals = false
}

resource "aws_ram_resource_association" "group_share" {
  resource_arn       = aws_verifiedaccess_group.web_apps.verified_access_group_arn
  resource_share_arn = aws_ram_resource_share.verified_access.arn
}

resource "aws_ram_principal_association" "workload_ou" {
  principal          = "arn:aws:organizations::123456789012:ou/o-xxxx/ou-xxxx-xxxxxxxx"
  resource_share_arn = aws_ram_resource_share.verified_access.arn
}

Monitoring and Logging

# Query access logs in CloudWatch
aws logs filter-log-events \
  --log-group-name /aws/verified-access/production \
  --filter-pattern '{ $.status_code = "403" }' \
  --start-time $(date -d '1 hour ago' +%s000)

# CloudWatch alarm for access denials
aws cloudwatch put-metric-alarm \
  --alarm-name "VerifiedAccess-HighDenialRate" \
  --metric-name "AccessDenied" \
  --namespace "AWS/VerifiedAccess" \
  --statistic Sum \
  --period 300 \
  --threshold 100 \
  --comparison-operator GreaterThanThreshold \
  --evaluation-periods 2 \
  --alarm-actions arn:aws:sns:us-east-1:123456789012:security-alerts

Security Best Practices

1. Layer policies: Use group-level policies for broad controls and endpoint-level for app-specific restrictions
2. Require device trust: Always include device posture checks in Cedar policies
3. Enable access logging: Send to both CloudWatch and S3 for real-time monitoring and long-term retention
4. Use RAM for multi-account: Share groups across OUs instead of duplicating configuration
5. Rotate OIDC secrets: Automate client secret rotation via Secrets Manager
6. Test policies in non-production: Validate Cedar policies before production deployment
7. Set high device trust thresholds: Require overall score above 70 for production access
8. Monitor for policy drift: Use AWS Config rules to detect unauthorized changes

References

• AWS Verified Access Documentation
• Cedar Policy Language
• Building Zero Trust Across Multi-Account AWS Environments
• Visual Guide to AWS Verified Access Setup
• NIST SP 800-207 Zero Trust Architecture