Executing Red Team Exercise

Executing Red Team Exercise

When to Use

• Assessing an organization's ability to detect, respond to, and contain a realistic adversary operation
• Testing the effectiveness of the security operations center (SOC), incident response team, and threat hunting capabilities
• Validating security investments by simulating attacks that chain multiple vulnerabilities and techniques
• Evaluating the organization's security posture against specific threat actors (nation-state, ransomware groups, insider threats)
• Meeting regulatory requirements for adversary simulation (TIBER-EU, CBEST, AASE, iCAST)

Do not use without executive-level authorization and a detailed Rules of Engagement document, against systems where disruption could affect safety or critical operations, or as a replacement for basic vulnerability management (fix known vulnerabilities first).

Most Often Missed & How to Confirm

• Measuring detection, not just achieving the objective — the deliverable is the MTTD/MTTR per technique and the gap map, not "we got DA". Timestamp every action so it can be diffed against the SOC's alert timeline; a flag with no timestamps is worthless for purple-team.
• OPSEC and telemetry evasion that real actors use — AMSI/ETW bypass, sleep masking, signed-binary proxy execution (LOLBins), and C2 over redirectors/domain fronting. Test payloads against the target's actual EDR before going live; getting burned on stage-0 wastes the engagement.
• Persistence and resilience — multiple persistence mechanisms and backup C2 channels so a single detection doesn't end access. Teams routinely deploy one beacon and lose everything to one block.
• Living-off-the-land over custom tooling — emulate the named threat actor's TTPs (map to ATT&CK) rather than throwing your favorite exploits; an inaccurate emulation tests the wrong defenses.
• Full kill-chain coverage incl. exfil — staging and exfiltration over the C2/DNS channel and the data-loss controls, not stopping at access.
• How to confirm: prove each objective with artifacts (screenshots of accessed crown-jewel data, staged/exfil file with hash, C2 beacon logs with timestamps) AND record which techniques the Blue Team detected/missed. Don't conclude a technique was "undetected" until you have confirmed against the SOC log during the purple-team debrief — silence in your view is not proof of a detection gap, and an alert you didn't see is not proof of success.

Prerequisites

• Executive-level written authorization with clearly defined objectives, scope, and off-limits systems
• Red team command and control (C2) infrastructure: primary and backup C2 channels with domain fronting or redirectors
• Operator workstations with OPSEC-hardened toolsets (Cobalt Strike, Sliver, Brute Ratel, or Mythic)
• Threat intelligence on adversary groups relevant to the target organization for adversary emulation planning
• Trusted agent (white cell) within the target organization who manages the exercise boundaries without alerting defenders
• MITRE ATT&CK matrix for mapping planned and executed techniques

Legal Notice: This skill is for authorized security testing and educational purposes only. Unauthorized use against systems you do not own or have written permission to test is illegal and may violate computer fraud laws.

Workflow

Step 1: Adversary Emulation Planning

Develop the operation plan based on a realistic threat model:

• Threat actor selection: Select an adversary group relevant to the organization's industry. For financial services, emulate FIN7 or Lazarus Group. For healthcare, emulate APT41 or FIN12. Map the selected adversary's known TTPs from MITRE ATT&CK.
• Objective definition: Define measurable objectives such as "Access customer financial data from the core banking system" or "Demonstrate ability to deploy ransomware across the domain"
• Attack plan development: Create a step-by-step operation plan mapping each phase to ATT&CK tactics:
  1. Initial Access (TA0001): Phishing, exploiting public-facing applications, or supply chain compromise
  2. Execution (TA0002): PowerShell, scripting, exploitation for client execution
  3. Persistence (TA0003): Scheduled tasks, registry modifications, implant deployment
  4. Privilege Escalation (TA0004): Token impersonation, exploitation for privilege escalation
  5. Defense Evasion (TA0005): Process injection, timestomping, indicator removal
  6. Credential Access (TA0006): LSASS dumping, Kerberoasting, credential stuffing
  7. Lateral Movement (TA0008): Remote services, pass-the-hash, remote desktop
  8. Collection/Exfiltration (TA0009/TA0010): Data staging, exfiltration over C2
• Deconfliction plan: Establish procedures for the white cell to distinguish red team activity from actual threats

Step 2: Infrastructure Preparation

Build OPSEC-hardened attack infrastructure:

• C2 infrastructure: Deploy primary C2 server behind redirectors that filter Blue Team investigation traffic. Use domain fronting or legitimate cloud services (Azure CDN, CloudFront) to blend C2 traffic with normal web traffic.
• Phishing infrastructure: Register aged domains (30+ days old), configure SPF/DKIM/DMARC, and build credential harvesting or payload delivery pages
• Payload development: Create custom implants or configure C2 framework payloads with:
  • AMSI bypass for PowerShell execution
  • ETW patching to evade security product telemetry
  • Sleep masking and memory encryption to defeat memory scanning
  • Signed binary proxy execution (rundll32, msbuild, regsvr32) for defense evasion
• Staging infrastructure: Set up file hosting for second-stage payloads, exfiltration drop servers, and backup communication channels
• OPSEC verification: Test the entire infrastructure against the same EDR/AV products deployed in the target environment before going live

Step 3: Initial Access

Gain initial foothold in the target environment:

• Phishing campaign: Send targeted spear-phishing emails to selected employees with weaponized documents or credential harvesting links. Use pretexts based on OSINT gathered during reconnaissance.
• External exploitation: Exploit vulnerabilities in internet-facing applications (VPN portals, web applications, email servers) identified during reconnaissance
• Physical access: If in scope, attempt physical access to deploy network implants (LAN Turtle, Bash Bunny) or USB drops
• Supply chain: If in scope, compromise a vendor or supplier relationship to gain indirect access
• Upon successful initial access, establish the first C2 beacon and confirm communication with the C2 server. Immediately implement persistence (multiple mechanisms) to survive reboots and credential changes.

Step 4: Post-Exploitation and Objective Completion

Operate within the target environment while maintaining stealth:

• Internal reconnaissance: Enumerate the domain, identify high-value targets, and map the network using BloodHound and internal scanning, with traffic designed to blend with normal administrative activity
• Privilege escalation: Escalate from initial user to local admin, then to domain admin, using the least detectable techniques (Kerberoasting over pass-the-hash, living-off-the-land over custom tools)
• Lateral movement: Move to target systems using legitimate protocols (RDP, WinRM, SMB) with stolen credentials. Vary techniques to test multiple detection signatures.
• Defense evasion: Continuously adapt to avoid detection. If a technique triggers an alert, note the detection and switch to an alternative approach.
• Objective execution: Complete the defined objectives (access target data, demonstrate ransomware staging, exfiltrate data) and document evidence of achievement
• Detection timeline: Record timestamps for every technique executed to later compare against Blue Team's detection timeline

Step 5: Purple Team Integration and Reporting

Convert red team findings into defensive improvements:

• Detection gap analysis: Compare the red team's technique timeline against the Blue Team's detection log. Identify which techniques were detected, which were missed, and the mean time to detect (MTTD) for each.
• ATT&CK coverage mapping: Create an ATT&CK Navigator heatmap showing which techniques were tested and whether they were detected, missed, or partially detected
• Purple team sessions: Conduct collaborative sessions where the red team reveals each technique step-by-step while the Blue Team identifies where detection should have occurred and writes new detection rules
• Report: Deliver a comprehensive report including the operation narrative, technique-by-technique analysis with detection status, and prioritized recommendations for improving detection and response

Key Concepts

Tools & Systems

• Cobalt Strike: Commercial adversary simulation platform providing beacons, malleable C2 profiles, and post-exploitation capabilities
• Sliver: Open-source C2 framework supporting multiple protocols (mTLS, WireGuard, HTTP/S, DNS) with cross-platform implants
• MITRE ATT&CK Navigator: Tool for visualizing ATT&CK technique coverage, enabling comparison of planned vs. executed vs. detected techniques
• Mythic: Open-source C2 framework with a modular agent architecture and web-based operator interface

Common Scenarios

Scenario: Adversary Emulation of FIN7 Against a Retail Company

Context: A national retail chain wants to test its defenses against FIN7, a financially motivated threat group known for targeting retail and hospitality organizations with point-of-sale malware, phishing, and data exfiltration.

Approach:

1. Emulate FIN7 TTPs: spear-phishing with malicious document containing VBA macros that execute PowerShell
2. Initial access achieved through spear-phishing a marketing employee; macro drops Cobalt Strike beacon using rundll32 proxy execution
3. Internal reconnaissance with BloodHound reveals a path from the compromised user to a service account with access to the POS management server
4. Kerberoast the service account, crack the password, and move laterally to the POS management system
5. Demonstrate data access to cardholder data environment, staging simulated card data for exfiltration
6. Exfiltrate staged data over DNS C2 channel to simulate data theft
7. SOC detected the lateral movement at hour 47 but did not detect the initial phishing, macro execution, or Kerberoasting

Pitfalls:

• Operating too aggressively and getting detected immediately, providing no value for testing Blue Team's advanced detection capabilities
• Using exclusively custom tools instead of living-off-the-land techniques that real adversaries prefer
• Not recording detailed timestamps for every action, making post-exercise analysis and detection gap mapping impossible
• Failing to establish backup C2 channels, getting burned by a single detection, and losing access without completing objectives

Output Format

## Red Team Exercise Report - FIN7 Adversary Emulation

### Exercise Summary
**Duration**: November 4-22, 2025 (15 business days)
**Objective**: Access cardholder data environment and demonstrate data exfiltration capability
**Outcome**: OBJECTIVE ACHIEVED - Red team accessed POS management system and staged cardholder data for exfiltration

### ATT&CK Technique Coverage
| Technique | ID | Status | Detected? | MTTD |
|-----------|----|--------|-----------|------|
| Spear-Phishing Attachment | T1566.001 | Executed | No | - |
| Visual Basic Macro | T1059.005 | Executed | No | - |
| Process Injection | T1055 | Executed | No | - |
| Kerberoasting | T1558.003 | Executed | No | - |
| Remote Desktop Protocol | T1021.001 | Executed | YES | 47h |
| Data Staged | T1074 | Executed | No | - |
| Exfiltration Over C2 | T1041 | Executed | No | - |

### Detection Summary
- **Techniques Executed**: 14
- **Techniques Detected**: 3 (21.4%)
- **Mean Time to Detect**: 47 hours (for detected techniques)
- **Mean Time to Respond**: 4 hours (from detection to containment)

### Priority Recommendations
1. Deploy email detonation sandboxing for macro-enabled document analysis
2. Implement Kerberoasting detection via Windows Event ID 4769 monitoring
3. Enhance PowerShell logging (Script Block Logging, Module Logging)
4. Deploy memory-scanning EDR capability to detect process injection